Used Okamoto Surface Grinding Machine for sale (25)

Condition: good (used), Year of construction: 1995, Table work area : 850×400 mm Table travel distance : 950×440 mm Distance table top to wheel bottom : 47.5 – 547.5 mm Standard chuck size : 800×400×105 mm Max workpiece weight : 700 kg (230 kg sur plateau magnétique) T-Slots (W×No.) : 17×3 Longitudinal feedrate : 3 – 25 mm/min Crosswise feedrate : 1 – 1000 mm/min Vertical feedrate : 1 – 1000 mm/min Min input increment (vertical) : 0.0002 mm Grinding wheel O.D.×W×I.D. : 355×38×127 mm Ncedpfxjwuglij Ab Isl Grinding wheel speed : 1500/1800 r.p.m. Wheel spindle drive motor : 3.7 / 4 kW Vertical feed motor : 0.3 kW Cross feed motor : 0.3 kW Hydraulic pump motor : 2.2 / 4 kW Air-cooled oil cooler motor : 90 / 105 W Floor space (L×W×H) : 3310×2228×2713 mm Machine weight : 4000 kg Specifications are subject to change at any time without prior notice. No liability shall be assumed for errors or omissions.

Condition: like new (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, grinding length: 605 mm, grinding width: 300 mm, Description We are selling a used, very well-maintained surface grinding machine from OKAMOTO, model ACC 63 SA. The machine was used for single-part production and has seen very little operating time. Nedpfx Aboycwgxo Ijcl Grinding length: 605 mm Grinding width: 300 mm Clamping surface of magnetic chuck: 605 x 300 mm Max. table load: 420 kg Grinding wheel size: 305 x 50 x 127 mm Grinding spindle motor power: 3.7 kW Spindle hours: 500 h Accessories: - Electro-permanent magnetic chuck 600 x 300 mm, cross-pole pitch 13 mm - 2 pcs. wheel flanges (optionally 4) - Band filter SBF 30 - Handwheel - Automatic grinding allowance compensation with wheel retraction - Automatic dressing - Incremental length measuring system (crosswise)

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Model PSG 63 – UAN Year of manufacture 1988 Grinding length 600 mm Grinding width 320 mm Maximum workpiece height 500 mm Table longitudinal travel 750 mm Table cross travel 340 mm Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speed 1,500 rpm Rapid vertical traverse 400 mm/min Power 3.7 kW Automatic feed Magnetic chuck Coolant system Weight 2,500 kg Ncsdoyaybtopfx Ab Ijl Price: €2,500 plus VAT, ex-site

Condition: like new (used), Year of construction: 2022, functionality: limited functionality, grinding length: 450 mm, grinding width: 150 mm, table length: 450 mm, table load: 120 kg, table width: 150 mm, grinding spindle speed: 3,000 rpm, Surface Grinding Machine from Showroom (new) Manufacturer: Okamoto Ncedpfxex U Dawo Ab Isl Model: ACC-450 AV (open design) Year of manufacture: 2022 Control: Okamoto FX Operating hours: 0 S/N: XXXX Technical specifications: ----- • Table size: 450x150 mm • Table travel longitudinal/cross: 530x165 mm • Max. table load: 120 kg • Max. grinding height table / new wheel: 397.5 mm • Standard magnetic chuck: 450x150 mm (P=13mm) • Automatic infeed: 0.0001–0.030 mm • Manual micro feed: 0.0001 / 0.001 / 0.01 mm • Spark-out strokes: 0–5 • Rapid traverse: 600 mm/min • Grinding wheel: 205 x 6–19 x 31.75 mm • Speed: 3,000 rpm • Grinding spindle motor: 1.5 kW • Connected load: 7 kVA • Dimensions: 2,000 x 1,430 x 2,265 mm • Machine weight: 1,250 kg Accessories: ----- • Grinding wheel on flange (new) • Paper band filter with 160 l tank • Table dresser + diamond • Work light • Tool kit • Operating manuals

Condition: used, Year of construction: 1991, working area 225 mm Nodpfx Aboud Algo Iecl table-size L:550 mm table-size B:200 mm sanding disc diameter 200mm mm magnetic plate size 500 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 2000x1600x2100 m

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, feed length X-axis: 750 mm, feed length Y-axis: 340 mm, feed length Z-axis: 525 mm, workpiece weight (max.): 420 kg, grinding height: 455 mm, grinding wheel diameter: 350 mm, distance table to spindle center: 455 mm, table length: 600 mm, table load: 420 kg, type of input current: AC, table width: 300 mm, grinding wheel width: 40 mm, spindle speed (max.): 1,500 rpm, overall weight: 2,500 kg, Precision grinding machine for flat surfaces "OKAMOTO mod. ACC-63DX BV" with viewer on the grinding wheel descent axis and on the table transversal axis. Ncjdpfsu T N Igex Ab Ijl

Condition: good (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 230 mm, spindle speed (max.): 3,000 rpm, For sale is a surface grinding machine of the brand Okamoto, type PSG 52 UDX The machine is well-maintained and ready for immediate use Ncjdpfownnbrjx Ab Iol Technical data: Year of manufacture: 1989 Grinding area: X-axis: 650 mm (manual) Z-axis: 230 mm Y-axis: 47 mm – 400 mm Max. height movement lower edge of new wheel (with ¯ 205 mm) min./max. - table) Grinding wheel ¯: Maximum ¯ 225 mm. Speed range: 3000 rpm (stepless speed control) Table feed: 0.3 – 25 m/min (hydraulic in X-axis) Table area ground: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (Load incl. magnet max. 200 kg) Transport and loading can be arranged on request, for an additional charge, Europe-wide. Prices plus VAT Viewing possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, visit our website

Condition: not inspected (used), For sale is an Okamoto surface grinder type ACC-12.24DX The machine can not be tested by us, because it requires a 60 Hz connection. Visually the machine is in good condition new grinding wheel included in the offer. Ncjdpsnzhwwefx Ab Ijl Technical data: Volt: 230/460 Freq.: 60 Hz phase: 3 Power: 7.5 KvA Control voltage AC: 100 V Control voltage DC: 12-24 V Clamping surface: 30*67 cm grinding wheel diameter: 30 cm Pitch circle diameter: 7.5 cm On request, for an additional charge, the machine can be loaded on truck and the transport can be organized Europe-wide. Prices plus value added tax Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm Nsdpfx Abow Dvkae Ijcl --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: used, OKAMOTO ACC 52 DX SURFACE GRINDING MACHINE Nsdpfx Abjw Elu Ro Iecl MAKE OKAMOTO, MADE IN SINGAPORE MODEL ACC 52 DX CONTROL AUTOMATIC TABLE SIZE 200 x 600 mm MAGNETIC CHUCK 200.0 x 500.0 mm ELECTRO MAGNETIC GRINDING WHEEL SIZE 205.0 x 19.0 x 50.0 mm TRAVERSES X AXIS: 650.0 mm Z AXIS: 230.0 mm DISTANCE GRINDING WHEEL TABLE 47.5 – 397.0 mm TOTAL POWER REQIUREMENT 2.25 kW MACHINE DIMENSIONS 2600 x 1600 x 1800 mm MACHINE WEIGHT 2,100 kgs PLUS DIAFORM WHEEL PROFILLING ATTACHMENT FAGOR DIGITAL READOUT VERTICAL HEIGHT READ OUT DISPLAY CROSS TRAVEL READ OUT DISPLAY AUTOMATIC DOWN FEED HYDRAULIC MOVEMENT COOLANT SYSTEM 200.0 x 500.0 mm FINE LOOP ELECTRO MAGNETIC CHUCK PAPER FILTRATION SYSTEM

Condition: good (used), Year of construction: 2002, functionality: limited functionality, Description Working range: X-axis (longitudinal): 800 mm Y-axis (transverse): 400 mm Z-axis (vertical): 440 mm Table clamping surface: 800 x 400 mm Table load max: 700 kg Sanding head: Grinding wheel diameter: 400 mm Drive power: 4 KW Dimensions / weight / transport dimensions: PACKING LIST: 4500x2300x2800 mm Machine 850x650x1400 mm Control panel 1600x650x900 mm Extraction unit 750x580x1000 mm Cooler 1800x900x750 mm Belt filter with pump 1050x650x2100 mm Switch cabinet 1200x800x400mm Grinding wheels+electrical diagram+operating instructions+stand Weight: 3.700 kg ACCESSORIES AND equipment: ' Magnetic clamping plate SAV 600 x 400 mm ' Coolant system with belt filter system ' Diaform unit type 102/RA210 Njdpovk R Stjfx Ab Iscl ' Airtech MFE20-SP extraction system ' Hand wheel ' Various grinding wheels / flanges

Condition: used, Year of construction: 1987, grinding length max. 600 mm grinding width max. 320 mm workpiece height max. 500 mm magnetic clamping plate 300 x 605 mm horiz. table movement: longitudinal hydr. max. 750 mm horizontal table movement: cross hydr. max 340 mm sanding disc diameter 350 mm grinding wheel width 40 mm bore 127 mm spindle turning speed range 1500 U/min rapid traverse vertical 400 mm/min Nsdpfxst Nzh Sj Ab Iscl total power requirement 3,7 kW weight of the machine ca. 2200 kg dimensions of the machine ca. 2300 x 1800 x 1850 mm

Condition: used, total height: 1,780 mm, total length: 2,720 mm, total width: 1,910 mm, Empty weight: 2.500 kg Price: On request - Documentation available: No - CE certificate present: No - X-axis travel [mm]: 750 - Z-axis travel [mm]: 340 - Table width [mm]: 600 - Table depth [mm]: 300 - Max. grinding wheel diameter [mm]: 355 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - Transport dimensions: 2725mm x 1910mm x 1780mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nedpfx Aewniacob Iocl Lukas van Rossum

Condition: like new (used), Year of construction: 2017, operating hours: 59 h, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, feed length X-axis: 510 mm, feed length Z-axis: 220 mm, feed rate X-axis: 20 m/min, grinding wheel diameter: 205 mm, distance table to spindle center: 357 mm, table load: 120 kg, type of input current: three-phase, grinding wheel width: 16 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 2,100 kg, grinding spindle motor power: 2,200 W, grinding wheel speed: 3,600 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Ncsdpfow Hf Hijx Ab Iol Year of manufacturing: 2017 Colour touchscreen: Yes Maximum grinding lenght x width: 400 x 200 [mm] Stroke X axis (table movement): 510 [mm] Min. Stroke speed X axis: 100 [mm/min] Max. Stroke speed X axis: 20000 [mm/min] Z axis travel (transverse movement): 220 [mm] Min. distance spindle nose / table: 22.5 [mm] Max. distance spindle nose / table: 357.5 [mm] Max. load on table: 120 [Kg] Grinding wheel min. speed: 1000 [rpm] Grinding wheel max. speed: 3600 [rpm] Grinding spindle motor power: 2.2 [kW] Max. diameter grinding wheel: 205 [mm] Max. grinding wheel width: 16 [mm] Min. grinding wheel width: 6 [mm] Grinding wheel bore: 31.75 [mm] Number of running hours: 59 [h] Supply voltage: 400 [V] Total power required: 11 [kVA] Weight : 2100 [Kg] INCLUDED EQUIPMENT: x1 150 [L] coolant tank FB1/R with papertape filtration unit FB1 x1 BRAILLON electro-permanent magnetic chuck type EPEFINE 2 x1 BRAILLON magnetic chuck remote control, microprocessor-based, type T10 x5 grinding wheel flanges x1 oil chiller x1 transformer x2 service keys x1 balancing shaft x1 set of axis-brackets for transport STANDARD CONVERSATIONAL PROGRAMMING MODE: Straight and angular dressing (standard) Surface grinding, multiple plunge grinding, and face grinding (standard) INCLUDED ISO PROFILING: Wheel profiling Contour machining of workpiece Full functionality for V-shape and freeform programming on the grinding wheel, and ISO contouring on the workpiece. Precise positioning integrated: +/- 1 [μm] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Similar machine to brands like Jones & Shipman, Jung, Favretto, Blohm, Studer. Also see cylindrical grinder, lathe, machining center, milling machine.

Condition: good (used), Year of construction: 2001, Table work area : 850×400 mm Table travel distance : 950×440 mm Distance table top to wheel bottom : 47.5 – 547.5 mm Standard chuck size : 800×400×105 mm Max workpiece weight : 700 kg (230 kg sur plateau magnétique) T-Slots (W×No.) : 17×3 Longitudinal feedrate : 3 – 25 mm/min Crosswise feedrate : 1 – 1000 mm/min Vertical feedrate : 1 – 1000 mm/min Min input increment (vertical) : 0.0002 mm Ncjdpfxewuglvs Ab Iel Grinding wheel O.D.×W×I.D. : 355×38×127 mm Grinding wheel speed : 1500/1800 r.p.m. Wheel spindle drive motor : 3.7 / 4 kW Vertical feed motor : 0.3 kW Cross feed motor : 0.3 kW Hydraulic pump motor : 2.2 / 4 kW Air-cooled oil cooler motor : 90 / 105 W Floor space (L×W×H) : 3310×2228×2713 mm Machine weight : 4000 kg Specifications are subject to change at any time without prior notice. No liability shall be assumed for errors or omissions.

Condition: used, Year of construction: 2005, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, workpiece weight (max.): 470 kg, table load: 700 kg, spindle speed (max.): 1,500 rpm, overall weight: 4,900 kg, grinding spindle motor power: 7,500 W, disc diameter: 355 mm, space requirement height: 2,100 mm, space requirement length: 4,220 mm, space requirement width: 2,500 mm, Equipment: rotational speed infinitely variable, Used Okamoto surface grinding machine for sale Nodpsx H Acuofx Ab Iscl Control: Fanuc type 21GA Stepless speed control Dressing incl. compensation Electromagnet The machine is used and fully functional. The hydraulic unit should be overhauled.

Year of construction: 1977, condition: used, Surface grinding machine Fabr.Okamoto Type:PSG - 63 UA Bj.1977 Magnet 600 mm X 300 mm. Grinding dimensions : longitudinal 630 mm transverse: 310 mm height : 350 mm Ready for use . Nedpfxoiz Tmkj Ab Iocl

Condition: like new (used), functionality: fully functional, I am selling this grinder, as new, for internal grinding, including accessories. A video of the machine can be sent via WhatsApp. 4. Specifications 4-1 Machine Specifications Item Unit OGM-250UDX Capacity Swing diameter over table mm 220 Distance between centers mm 500 Ncedpfxexwm Uas Ab Iol Max. workpiece diameter mm 200 Max. workpiece weight kg 60 (centered workpiece) Grinding wheel External diameter x width x bore mm ⌀305 x 25 x ⌀127 Rotational speed (via belt change) min-1 2357 / 2087 Max. peripheral speed m/min 2000 Grinding spindle X-axis travel mm 203 Swivel angle degree +30° Minimum travel increment mm ⌀0.001 Handwheel feed value mm/rev ⌀2 per revolution Table Z-axis travel mm 640 Swivel angle degree 4 to 9 Handwheel feed value mm/rev 7.5 per revolution Automatic feed rate mm/min 50 to 4000 Workhead Spindle type Spindle for combination — fixed/rotary Spindle taper Morse No. 3 Spindle through hole diameter mm ⌀17.5 Spindle speed min-1 10–500 Swivel angle degree 30° to 90° Tailstock Quill stroke mm 20 Quill taper Morse No. 3 Motors Grinding wheel spindle motor kW 1.5 (2.2) Workpiece spindle kW 0.4 Table feed kW 0.4 Lubrication pump kW 0.01 Coolant pump kW 0.06 Magnetic separator (optional)kW 0.025 Power Supply Power consumption kVA 10 Voltage V 200 Frequency Hz 50 Tank Capacity Coolant tank liters 80 Lubrication tank liters 5 Workpiece center height from floor mm 1040 Required Footprint Width mm 2880 Depth x Height mm 1884 x 1600 Net weight kg 1900

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Ncsdpsxf Ikfjfx Ab Ijl

Condition: excellent (used), Grinding length 600 mm Grinding width 320 mm Max. workpiece height 500 mm Longitudinal table travel 750 mm Cross table travel 340 mm Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speed 1500 rpm Vertical rapid traverse 400 mm/min Power 3.7 kW Automatic feed Nodpfx Aow Hy Twjb Ijcl Magnetic chuck Coolant system Weight 2500 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 66586, grinding length: 650 mm, grinding width: 323 mm, grinding height: 450 mm, table length: 600 mm, table load: 420 kg, table width: 400 mm, TECHNICAL DETAILS X-axis: 600 mm Z-axis: 450 mm Y-axis: 323 mm Magnetic clamping plate Type: Electro-permanent magnetic clamping plate Size: 600 x 400 mm Table load: 420 kg Area of application: High-precision machining Features: Electronic demagnetization and holding force coding Pole pitch: 18 mm (transverse parallel pole) Air hole set: 2 x 3 holes, central locking device Dressing system Ncedpfxovw Su Ao Ab Isl Type: Hydraulic straight dresser Automatic: Automatic dressing with compensation of the dressing amount, grinding wheel wear, intermediate dressing and grinding head reset MACHINE DETAILS Installation dimensions: 4,350 x 3,700 x 2,300 mm Machine dimensions: 3,425 x 2,263 mm Weight: 3,200 kg Connection power: 9.5 kVA EQUIPMENT - Microcomputer control group for magnetic clamping plate - Electro-permanent magnetic clamping plate (600 x 400 mm) with demagnetization and holding force coding - Belt filter machine SBF 30 Complete with 150 l tank, pump, supply lines, fittings and 1 roll of filter fleece - Replacement disk flange (Ø 127 mm). - Automatic dressing with hydraulic dresser

Condition: used, Year of construction: 2000, functionality: fully functional, OKAMOTO ACC 95DX Precision Surface Grinder – 400V For sale is an OKAMOTO ACC 95DX surface grinder. This is a robust industrial machine designed for precision surface grinding, making it ideal for toolmaking and manufacturing applications. The machine comes with a separate control console. Inspection and test run available by appointment. Machine Data: • Manufacturer: OKAMOTO Machine Tool Works, Ltd. • Model: ACC 95DX (Nameplate: ACC95DXM) • Serial number: 690277 • Voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Total connected load: 8.6 kVA • Control/Auxiliary voltage: AC 100 V, DC 22/24 V (as per nameplate) Equipment / Notes: • Side-mounted control console (see photo) • Grinding head/safety enclosures included • Availability: immediate / by arrangement • Sale ex stock, subject to prior sale Ncsdpfxewtm Dio Ab Iel

Condition: like new (used), Year of construction: 2022, operating hours: 1,034 h, functionality: fully functional, machine/vehicle number: 26128, Okamoto OGM 250 UNC III Machine Characteristics: - OKAMOTO touch-screen NC controller with advanced OKAMOTO software - 2-axis interpolation - Step (shoulder) automatic probe for setting starting reference and face grinding - Automatic wheel dressing with automatic compensation - Up to 21 programs can be stored - 6 types of grinding cycles, up to 10 steps each - 5 types of wheel dressing cycles - Zero point measuring device and air gap measuring device (optional) - Extremely rigid, stress-relieved cast iron bed construction - Double V-type prismatic slideways, only OKAMOTO machines are manufactured this way (with unique hand-scraped surfaces) Technical Data: Capacity - Max. swing diameter over table: Ø 220 mm - Distance between centers: 500 mm - Max. grindable diameter: Ø 200 mm - Max. workpiece weight between centers: 50 kg - Max. workpiece weight in chuck, gross: 20 kg - Grinding wheel size for universal grinder: Ø305 mm x 50 mm x Ø127 mm - Max. peripheral speed (with inverter): 45 m/sec - Wheel spindle X-travel: 215 mm - Universal swiveling range: +/- 30° - Diameter resolution: 0.0001 mm - Rapid traverse in diameter: 4 m/min - Table Z-travel: 762 mm - Swivel angle: 0° ~ -9° - Resolution: 0.0001 mm - Rapid traverse: 8 m/min - Workhead type: fixed and rotating centers, taper MK3 - Workhead bore diameter: Ø18 mm, speed 10 – 500 rpm - Swivel angle - universal: 30°/ -90° - Tailstock sleeve stroke: 20 mm, sleeve taper MK3 - Motors: Wheel spindle 3.7 kW, workhead AC servo 1.8 kW, table feed AC servo 1.2 kW, wheel feed AC servo 1.2 kW - Total power requirement: 15 kVA - Machine dimensions: length 3,400 mm, width 2,330 mm, height 1,950 mm - Net weight: 3,300 kg Standard grinding and wheel dressing software features: - 10-step automatic grinding cycle - Straight wheel dressing cycle - Plunge oscillation grinding cycle - Offset plunge (roughing) + cross-feed finishing grinding cycle - Shoulder wheel dressing cycle for both left and right sides - Profile wheel dressing cycle, programmable in ISO G-code - Grinding cycle for workpiece shoulders, left and right sides Standard Accessories: - Grinding wheel Ø305x50xØ127 mm (UNC III), 1 pc - 2 wheel arbors - 3.7 kW spindle motor - Max. grinding wheel peripheral speed: 45 m/sec - Speed controller for workhead spindle - FANUC 0i D CNC control (simultaneous 2-axis) - 10.4" color OKAMOTO controller – vertical and cross-feed display - Graphical teach software for creating grinding and dressing cycles - Complete Fanuc push-button panel for ISO G-code programs with corner radius compensation - Electronic handwheel (graduations: x1/x10/x100) - Rapid traverse control lever (joystick) for cross and longitudinal directions - Enclosed guard with safety interlocked sliding door Ncjdpfx Aex R Tw Rsb Ijl - LED machine lamp - Automatic lubrication during operation - Coolant nozzles and piping - Coolant system for wheel dressing - Permanent coolant installation to the table - Carbide centers - Step (shoulder) positioning device and software - Gap sensor and software - Leveling screws and base plates - Tool kit - Operating manual - CE version - Table rotation measuring device - Coolant system with paper filter, DGS, 200 l - Rinsing gun - 2-point manual steady rest - 130 mm manual chuck with backplate - Motorized tailstock sleeve with foot pedal - Status lamp (green/yellow/red) - Balancing arbor - Spare wheel arbor

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, grinding length: 2,000 mm, grinding width: 1,550 mm, total height: 7,000 mm, workpiece weight (max.): 5,400 kg, grinding wheel diameter: 510 mm, table length: 2,000 mm, table width: 1,500 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 400 rpm, grinding spindle motor power: 22 W, travel distance X-axis: 2,250 mm, travel distance Y-axis: 740 mm, travel distance Z-axis: 1,670 mm, space requirement height: 4,100 mm, space requirement length: 7,350 mm, space requirement width: 4,600 mm, Equipment: documentation/manual, rotational speed infinitely variable, Precision double column surface grinding machine "OKAMOTO mod. PSG-2015CHNC" with Fanuc 0i-MF numerical control Njdpfx Asrck T Seb Ijcl

Condition: used, Year of construction: 2022, operating hours: 4,264 h, grinding length: 500 mm, grinding width: 300 mm, CNC CYLINDRICAL GRINDER OGM-350 UNC III by OKAMOTO Equipped with Fanuc 0i control, 2 interpolated axes Ncjdpfxjwqcazo Ab Iel Grinding diameter: 300 mm Grinding length: 500 mm KEY FEATURES OF THE GRINDER - User-friendly CNC control - FANUC 0i, 2 interpolated axes - Conversational programming - Programmable in-feed dressing with compensation - Automatic rapid infeed and retraction of the workhead - Dimensional compensation - Interruption for dressing function - Automatic calculation of swiveling angle for table positioning - Sturdy construction and functional machine bed design - Electronic handwheel - Spindles: high-precision roller bearings for the grinding and workhead spindles with lubrication for long life - Ultra-precise ball screws for X and Z axes, directly coupled AC servo motors STANDARD EQUIPMENT LIST - Grinding wheel Ø 405x50 (UNC) - Grinding wheel flange, mounting Ø 127 mm - Separate electronic (portable) handwheel for X/Z axes - Machine enclosure with large front sliding doors - Tailstock with sleeve and manual lever - Micrometric cylindricality adjustment of the tailstock - 7.5 kW grinding motor - Infinitely variable grinding spindle drive - Grinding speed up to 45 m/s - Automatic central lubrication - Device for automatic longitudinal or plunge positioning, including measuring head and software - GAP-Eliminator with sensor (reduces “air grinding” time during multiple infeeds) - Balancing arbor - 10.4'' color touchscreen panel with graphic interface - Leveling screws and plates - Service tool kit - Dressing tool holder including diamond - Operating manual - Machine painted in OKAMOTO gray-beige (Munsel 5Y6/1) or according to specification at extra cost - Machine equipment compliant with CE standard