Used Martin T60C for sale (80)

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,350 kg, Equipment: documentation/manual, We are offering this well-maintained Martin T72 panel saw, year of manufacture 1990. Manufacturer: Martin Model: T72 Year of manufacture: 1990 Condition: good Hnjdpfsylvnajx Agdei Category ID: 1432 Type ID: 730 Machine type: panel saw If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Panel saw Martin T60, Sliding table 300 cm, Main motor 5.5 kW, Right-side rip fence adjustable up to 1250 mm, Hnjdpfxetza Sms Agdoi Tilt motorized adjustment, Up/down motorized adjustment, Max. blade diameter 400 mm, Swiveling side carriage.

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: Hnodsyi Tv Nopfx Agdei - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Hnsdpfx Asx Th Ngsgdoi

Condition: good (used), Year of construction: 1995, planing width: 630 mm, height adjustment type: electric, number of planer blades: 4, planing height: 250 mm, Equipment: motor brake, ⭐ MARTIN Thickness Planer T44 – 7.5 kW – Tersa – Digital Display – Electric Thickness Table – Top Industrial Quality ⭐ For sale is a high-quality Martin T44 thickness planer from German industrial production – renowned for its extremely smooth operation, precision, and durability. This machine is perfect for professional joineries, timber construction companies, or demanding workshops seeking a reliable heavy-duty machine. ✅ Technical data & features: + Manufacturer: MARTIN + Model: T44 + Planing width: 630 mm + Planing height: 2.8 – 250 mm + Year of manufacture: 1995 + Motor power: 7.5 kW (powerful industrial motor) + Tersa cutterhead system – quick blade change without adjustment + Digital thickness table readout for precise operation + Electric thickness table adjustment + Heavy, low-vibration cast iron construction + Rubber-coated outfeed roller Hedpeyh I Etsfx Agdsni + Centralized lubrication + Very clean planed surface and quiet operation ️ Condition: + Well-maintained used machine from active operation + Technically flawless + Ready for immediate use + Typical wear consistent with age Inspection & test run by appointment possible – machine can be tested on site. Price: €9,600 net Location: 39340 Haldensleben Shipping by freight possible

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm Hjdpfxoyitz Ss Agdjni - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Hnsdpfsu Uh U Iex Agdji

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Hnodpfx Ajygndpsgdoi Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: used, Year of construction: 1992, functionality: fully functional, type of input current: three-phase, cutting height (max.): 550 mm, cutting width (max.): 1,300 mm, total length: 3,300 mm, cutting length (max.): 3,300 mm, cutting height with scoring (max.): 450 mm, Equipment: scorer, We offer this used Martin T72 panel saw, year of manufacture 1992, ready for operation. Hnjdpoyg Ia Rofx Agdsi

Condition: used, 3200mm carriage Tiltable blade with hydraulic rise and fall Cutter 380V Sold as is without inspection Hnedpfeyf Eptox Agdoi

Condition: excellent (used), Spindle 30 mm, Table width 100 cm, 3-roller feed, Side tables length 110 cm x2 Hsdsygxciepfx Agdjni

Condition: excellent (used), Year of construction: 2000, Saw blade tilting up to 45.5 degrees Cutting height 145 mm max. saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/ 4000/ 5500 rpm Motor power 5.5 kW Suction DM - DM 120 mm max. cutting length 3300 mm Hnedpfx Aemmb Acjgdji Dimensions L x W x H = 3300 x 3800 x 1400 mm Weight approx. 1365 kg Generally: parallel fence width adjustment with hand-wheel on the front of the machine Digital display for cutting width Saw blade height and tilting adjustment via foot pedal Scoring unit adjustable by electric motor Length stop on the cross table with digital display retractable parallel stop CE incl. manual incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Hnjdpfx Asvwfiaegdsi

Condition: used, Year of construction: 1981, Used, good condition Make: Martin Type: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length: approx. 2700 mm Pivoting up to 45° Parallelogram guard Tabletop extension Hydraulic height adjustment Hydraulic pivot adjustment Miter stop Extraction connection: D 120/80 mm Space required: approx. 2800 mm x 3400 mm x 1200 mm Hnsdpfswkvw Tjx Agdji Weight: approx. 1000 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 1990, Working width 630 mm Dimensions (L/W/H) 115x110x120 mm turning speeds 5000 U/min connected load frequency 380 V Hnedpfx Aenn Nqwjgdji

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: V 455228, functionality: fully functional, planing width: 500 mm, cutting length (max.): 3,300 mm, cutting width at rip fence: 1,650 mm, Top of the line jointer Packaged and ready for shipping! Hnedjyakqlspfx Agdoi

Condition: used, This listing is for the Hulme Martin 3151 Heat Sealer Hnedpfjxhgc Eox Agdsi The unit is in full working condition and is ready for immediate use This model Includes Cool and Heat Cool Electronic Controls

Condition: used, This listing is for a Hulme Martin 10/3319 Heat Sealer The unit is in full working condition and is ready for immediate release. This is an mpulse heat sealers (for like-for-like thermoplastic film welding), constant heat sealers (for laminated or foil materials), vacuum sealers and other ancillary equipment. Hnodpfsxuiv Iox Agdsi Designed for durability (20+ years or more in service according to their marketing) and easy servicing via plug-in heater bars and affordable consumables.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Length of the carriage - 3300mm Right fence manually adjustable Hedpfx Aeycc Nrsgdoni Scorer Electrically adjustable height and tilt of the saw max. cutting height: 130 mm One-sided tilt of the saw angle 0 - 46°. Saw blade diameter: 250 - 400mm Motor power 5.5 kW Number of revolutions: 4000 / 4800 / 6000 U/min Year of production - 2008

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw Hnodpfx Aohfufgsgdsi -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Electrode pliers with air connection for, electrode device, electrode welding device, joint planer, electrode pliers Hnsdpfocf Dhujx Agdsi -for: carbon arc process -Cable length: 2.5 m -Dinse connector -Air connection -Number: 2x cables available -Price: per piece -Weight: 4 kg

Condition: like new (used), Year of construction: 2004, Four-side planer Martin T 90 Fully refurbished machine Year: 2004 Specifications: Working width: 260 x 160mm Spindle speeds: 6000 RPM Tersa cutterblock spindle 56 Amps 6 Bar Hnedpox Tgu Iefx Agdei

Condition: excellent (used), functionality: fully functional, Panel saw Martin T72a Sliding table length: 3200 mm Hedpfjya Hpqsx Agdoni Cutting width to the right: 1250 mm Maximum cutting height: 170 mm Scoring unit Hydraulically adjustable cutting height Hydraulically adjustable cutting angle Right rip fence hydraulically adjustable Saw blade size min/max: 200–500 mm Scoring saw blade: 120 mm Saw blade speed, variable via belts: 2800-4000-5500 rpm Main motor: 5.5 kW Scoring unit motor: 0.75 kW CE certificate Technical documentation

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm Hedpfoqlck Nsx Agdsni - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm Hnsdeqlckpjpfx Agdsi - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -