Used Martin T60C for sale (82)

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension Hedpswnbfkefx Ah Ijfr -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers Hodpfstxirfsx Ah Iefr for 3 m sliding carriage

Condition: used, Year of construction: 1986, functionality: fully functional, cutting length (max.): 2,500 mm, cutting width (max.): 1,050 mm, USED, WELL-MAINTAINED MARTIN T71 PANEL SAW WITHOUT SAFETY GUARD FOR SALE! HEIGHT ADJUSTMENT AND TILTING VIA FOOT PEDAL: SLIDING TABLE LENGTH 2500MM CUTTING WIDTH 1050MM Hfsdpfx Aowfcx Tjh Isr

Year of construction: 1969, condition: ready for operation (used), machine/vehicle number: 18059, height of centers: 250 mm center distance: ca. 1740 mm max. circulation-Ø over bed: über Bett 500 mm spindle boring: 63 mm Hjdpsidiq Aofx Ah Iofr spindle retainer: Gr. 6 retainer taper tailstock: 5 MK spindle speed: 170 - 2240 rpm forwarding feed: längs/plan 0,014-1/0,0063-0,45 mm/U thread pitch: 0,1 - 112 mm electrical connection: 380 V, 7,5 kW space needed: 3370 x 1000 x 1400 mm weight: 2360 kg

Condition: good (used), Year of construction: 1975, Martin Miniline 616 Hfodjq Nf D Hspfx Ah Isr - Vacuum feeders - hhs-Gluesystem with Gluecontrollsystem - Max.Speed: 24,000 Sh/h - Max.Size: 600x1600 mm - Year 1975/1991 - 2 Color Flexo - Slotter - Rotary die cutting - Folding gluing - Counter Ejector, Year 1991

Year of construction: 2005, condition: ready for operation (used), Equipment: T 7300/2, T 7301 (precision adjustment for parallel stop), T 7302, T 7309/2, T 7330 (fixed scale), T 7337 (analog cross stop with seamless alignment), saw blade diameter: 250-500mm, speed: 2800/4000/5500/min, max. cutting height: 80mm, cutting width: 850mm, saw blade swivel range: 0-46°, sliding table length: 3000mm, connected load: 4kW, weight: 1.65t. An on-site inspection is possible. Hfjdpfx Aow S Txveh Ior

Condition: good (used), Year of construction: 1961, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Condition of machine bed: very good condition Hfsdswfpilspfx Ah Ier -Machine bed: hardened -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools see photos -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: good (used), Year of construction: 2000, Sizing saw with scoring unit 3 m sliding carriage Hfsdpfx Ahjtw Hd Ao Ior Digital displays Width adjustment is no longer motorized Height adjustment converted to foot hydraulics Clamping beam not included in the price

Condition: used, MARTIN T21 Table Router - used - fine-adjustable milling fence, Hjdpow Nv Nlofx Ah Iofr right/left rotation ----- Technical Data ----- Table size: 1,000 x 930 mm, Spindle diameter: 30 mm, Height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Extraction port Ø: 120 mm, Weight: 630 kg

Condition: used, Year of construction: 1967, Center height: 300 mm Center width: 1000 mm Swing diameter: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Hedpfovzn E Sox Ah Ijfr Tailstock taper: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/transverse 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space required: 2900 x 1450 x 1750 mm

Condition: excellent (used), Panel saw Martin T72a Sliding table length: 3200 mm Cutting width to the right: 1250 mm Maximum cutting height: 170 mm Hfsdpfx Ahjxapvxs Ior Scoring unit Hydraulically adjustable cutting height Hydraulically adjustable cutting angle Right rip fence hydraulically adjustable Saw blade size min/max: 200–500 mm Scoring saw blade: 120 mm Saw blade speed, variable via belts: 2800-4000-5500 rpm Main motor: 5.5 kW Scoring unit motor: 0.75 kW CE certificate Technical documentation

Condition: good (used), Year of construction: 2005, operating hours: 527 h, functionality: fully functional, machine/vehicle number: 05-9473, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 60 mm, total height: 2,000 mm, total length: 1,600 mm, total width: 3,800 mm, rotational speed (max.): 12,000 rpm, input voltage: 400 V, The machine in question is a grinding and drilling center (manufacturer designation: stone cutting machine). The machine is designed as a vertical machining center in a gantry design. The frame consists of a welded steel tube construction. The drilling head is mounted vertically. There is no angular adjustment possible on any axis for the drilling head. Tools with horizontal shafts can be attached via an existing angle grinder attachment. The tool can be moved linearly along 3 axes: x, y (horizontal), and z (vertical). The machine table is fixed and does not move. The machine is used for: - Creating cutouts and round edge profiles - Making drip edges or drip grooves, polishing surfaces, polishing edges, and drilling natural stone slabs The machine is also equipped with: - an angle grinder attachment - a compressed air connection (for generating vacuum for clamping fixtures and for cleaning the drill spindle) - a water connection (for cooling tools and workpieces during machining) Hfsdpfx Aew Upzfsh Ier Machine Data: Manufacturer: Martin Kolb Maschinenbau - Model: Genius 2500 - Serial Number: 05-9473 - Year of Manufacture: 2005 - Max. working area: 2,500 x 1,100 mm - Max. workpiece thickness: 60 mm - Main drive power: 6 kW (400V / 50 Hz) - Spindle speed: 0 - 12,000 rpm (frequency controlled) - Tool holder: 1/2 inch thread - Max. drilling diameter: up to 100 mm Various accessories such as milling cutters and other tool holders are also included.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Martin T 25 Year of manufacture: 1985, low operating hours 5.5 kW motor with brake 4 spindle speeds: 3000/6000 and 4500/9000 rpm Hfsdpsw Ni Rcjfx Ah Isr Forward and reverse rotation 30 mm spindle Tiltable from -5 to +45 degrees Electric height and tilt adjustment Max. tool diameter: 270 mm Adjustable fence jaws with fine adjustment Extraction connection: 120 and 100 mm Table size: 117 x 80 cm Includes 3-roller Holzher power feeder, 2 Aigner table extensions

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: Alpha 2-4 LD-2, battery voltage: 230 V, Used Martin Christ Alpha 2-4 LD-2 plus freeze dryer with Vacuubrand chemistry pump Type: Alpha 2-4 LD-2 plus (101542) | Vacuubrand RC 6 Hfedpfxswm Eais Ah Isr Manufacturers: Thermo Fisher Scientific (Martin Christ) | Vacuubrand GMBH Voltage: 230 (50hz) Including documentation and manual

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm Hodpfjhfufgox Ah Isfr -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Year of construction: 1978, spindle tilting: yes 0 - 45° height adjustment: manual tilting adjustment: manual fence adjustment: manual Hedpsuzkxfsfx Ah Ijfr read out height : - read out tilting: Scala read out fence: Scala sawblade diameter: 30 mm speeds: 3000, 4500, 6000, 9000 motor power: 5 kW motor brake: yes, feed brake suction connection: 2 x 100mm machine length: 1200mm machine depth: 1400mm weight: 800kg

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. Hfsdpfxjwnm U Ro Ah Ijr From stock, apparently has never been used. Milling arbor is only suitable for T27, not for T26. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: reconditioned (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 116680, Connected load 380V 11A planing width 630 mm planing height 250 mm feed rate 8-20 m/min suction socket 160 mm weight approx. 870 kg rubberized infeed and outfeed roller two-knife shaft with strip planing knives Hfodpfsh U A Evex Ah Ier Central lubrication Planing height via handwheel adjustment Star-delta switch

Condition: used, Table router MARTIN -used- finely adjustable milling fence, right/left rotation Hodpfx Asu R Td Neh Iofr ----- Technical data ----- Table size: 1,000x930 mm, Worktable height: 860 mm, Spindle diameter: 40 mm, Useful length of milling spindle: 160 mm, max. cutter diameter: 255 mm, max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 4.7/5.7 kW, Extraction nozzle Ø: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, total width: 1,200 mm, total height: 1,200 mm, total length: 1,200 mm, planing width: 630 mm, overall weight: 1,100 kg, working width: 630 mm, number of planer blades: 2, 2-knife shaft with wedge strips Rubber infeed and outfeed roller Segmented pressure bar Electric height adjustment with digital display 4 feed speeds 6-9-12-18 m/min Extraction nozzle Ø 160 mm Hfodpfx Ahewcn Syo Ior

Condition: used, Electrode pliers with air connection for, electrode device, electrode welding device, joint planer, electrode pliers -for: carbon arc process -Cable length: 2.5 m -Dinse connector -Air connection -Number: 2x cables available -Price: per piece Hfedecf Dhujpfx Ah Ior -Weight: 4 kg

Condition: used, with attached sliding tableconstructed with a cross-cut sawused, good condition, poorly usedmanufactured by Martintype T 21brake mechanical foot pedalright hand-left hand rotationtable size l x w 800 x 1000 mmmilling arbor diameter 30 mmcutter fence Holzbackensliding table / sliding tableworkpiece clamp 1 x mechanicalguide fence 1 x 1500 mm, 1 x 1000 mmexhaust connection D 150 mmrequired space ca. l x w x h mm1700 x 1200 x 1300located in 97447 Gerolzhofensale in current condition as seenwithout technical examination- free on truck - Hedpfx Ahovwgato Isfr

Condition: like new (used), Martin Quick-Clamping Nut for 40mm Milling Arbor. From stock, apparently has never been used. Hsdpewnnaujfx Ah Isfr The quick-clamping nut is used for the T27. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Hsdpsvwfiasfx Ah Iefr

Condition: used, Year of construction: 1981, Used, good condition Make: Martin Type: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length: approx. 2700 mm Pivoting up to 45° Parallelogram guard Tabletop extension Hydraulic height adjustment Hydraulic pivot adjustment Miter stop Extraction connection: D 120/80 mm Space required: approx. 2800 mm x 3400 mm x 1200 mm Weight: approx. 1000 kg Hsdewkvw Tjpfx Ah Isfr Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee