Used Mep Shark 331-1 Nc 5.0 Spider for sale (134)

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm Bohv8H2Zqa capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows “CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feeder with protective cover and safety limit switch - Positioning of the saw head and movement of the feeder using the joystick - Automatic recognition of the start of the cut - Electronic strap tension control - Automatic monitoring of the cutting load - Removable coolant pan * (equipped with 2 electric pumps for lubrication and cooling of the saw band) - Instructions DE

Condition: new, Year of construction: 2024, MEP band saw machine SHARK 331-1 NC 5.0 Spider U7Mpshjph All MEP models on request ! Motor power 2,2 kW band opening 340 mm belt dimensions 3650x27x0,9 mm weight 1.240 Kg speed 15 - 100 m/min. infinitely variable cutting area 0° 280 / 260x260 / 330x260 cutting area 45° right 260 / 250x250 / 270x200 Cutting surface 45° left Cutting area 60° right 180 / 170x170 / 170x170 Cutting surface 60° left Description Hydraulic bandsaw fully automatic Miter cuts up to 60° left possible saw band length: 3650x27x0,9 Single stroke: 600 mm (programmable up to 10m) Simple touch screen operation. Saw arm made of Spheroguss - robust and stable Required floor space 3,4 m² Footprint 1900mm wide x 1800 mm deep For further technical data please refer to the attached PDF document.

Condition: new, Model Name 7Skg37Xhq0 SHARK 331-1 NC 5.0 SPIDER

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0° to 60° left - Windows “CE” based MEP 50 control and 7” touch screen display * Simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs each with a maximum of 9999 pieces and a maximum length of 9999 mm - Material feed with stepper motor via ball screw * Single stroke 600mm repeatable to saw any length * Accuracy of ±0.1/600mm - Feeder with protective cover and safety limit switch - Precise adjustment of the cutting feed in mm/min - Positioning of the saw head and movement of the feeder using a joystick - Automatic detection of the start of the cut - Large deflection pulleys, adjustable made of cast steel - Saw band tension with band tension control and display on the display - Carbide band guides for maximum cutting precision Dpdkyd - Automatic monitoring of cutting load - Vice with quick adjustment * with replaceable clamping and stop jaws - Large chip tray and coolant container that can be pulled out to the side * Equipped with 2 electric pumps for lubrication and cooling of the saw band * Coolant gun for cleaning the machine - Chip clearing brush for cleaning the saw band - User manual EN Info from the manufacturer: When installing this saw in the network Residual current circuit breaker (FI) should this all-current sensitive and not under 300 mA.

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm dimensions of saw-band 3650 x 27 x 0,9 mm band speed 15 - 100 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round li. 260 mm capacity 45 degrees: square li. 250 mm capacity 45 degrees: flat li. 270 x 200 mm capacity 60 degrees: round li. 180 mm capacity 60 degrees: square li. 170 mm capacity 60 degrees: flat 330 x 260 mm motor 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 1,9 x 1,8 m Control Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame - Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard. Vice closes / opens automatically, The saw arch is automatically returned to the start of the cut) - Fully automatic operation (10 programs, each with different Quantity (max. 9999) and length (max. 9999.9 mm) with an accuracy of ± 0.1 / 600 mm. Execution of up to 10 combined programs in one cycle. Three different cutting cycles can be selected - Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision - Large-sized deflection discs, adjustable made of cast steel with integrated belt circulation control - Dynamic cutting pressure control (variably programmable, control via Stepper motor due to the torque monitoring of the belt drive) - Precise adjustment of the cutting feed with information in mm / min. - Frequency converter for stepless drive of the tool - X-axis (material feed) via recirculating ball spindle with at least remaining piece 210 mm Be3Uxi9Ni2P - Control (Windows CE based) with 7 "touch screen and additional soft- Buttons, backlit display to show all Machine parameters and messages in plain text: Number of cuts (programmed / executed) / cutting speed / lowering speed / preselectable Cutting pressure (in amps) / cutting time / power consumption of the saw band motor / Saw band tension in kg (minimum band tension = 900 kg) / saw frame position (Y- Axis) / feeder position (X-axis) / alarms / faults (description and Causes) / diagnostics ... - Saw band tension with band tension control and indication on the display by means of electronic converter - Base with door - Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area, removable coolant tray 100 liters - Coolant gun for cleaning the machine - Vice with quick adjustment and exchangeable clamping and Stop jaws - Chip removal brush for cleaning the saw band

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² Fb8Uhfx •Footprint 1900mm wide x 1800mm deep

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm dimensions of saw-band 3650 x 27 x 0,9 mm band speed 15 - 100 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round li. 260 / re. 200 mm capacity 45 degrees: square li. 250 / re. 180 mm capacity 45 degrees: flat li. 270x200 re. 200x160 mm capacity 60 degrees: round li. 180 mm capacity 60 degrees: square li. 170 mm capacity 60 degrees: flat li. 170 x 170 mm motor 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,9 x 1,8 m Control Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left). -Manual or semi-automatic dynamic cycle to make cuts outside of series production directly without programming. -Numerically controlled band saw machines with the new Windows “CE” based control, specially developed by MEP for automatic machines. FEATURES: -User interface with 7 ”touch screen display and mechanical keys for the Vnddbpx3 operating functions of the sawing machine, guarantees reliable operation, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker -The control console on a swiveling arm enables comfortable and safe operation from any position. -Display and entry of alarm and error messages with the option of displaying incidents that have occurred. - Infinitely variable regulation of the cutting speed from 15 to 100 m / min via frequency converter (inverter). -The latest generation of hydraulic power pack, extremely powerful with low energy consumption. -Material feed with stepper motor via ball screw mounted on opposing ball bearings; 600 mm repeatable single stroke to saw any length. -Positioning of the saw head and movement of the feeder using a joystick. -Automatic detection of the cutting start position. -Hand-operated strap tension control with indication on the display by means of an electronic converter. -Automatic monitoring of the cutting load through a servo valve mounted directly on the cylinder. -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of the saw band) is built into the underframe -The chip drawer can be replaced by a motorized chip conveyor - see special accessories. -Preparation for the installation of the OPTIONAL minimum quantity lubrication system in addition to the conventional standard lubrication with emulsion oil. -Schipping brush. -Bimetal saw band for solid and profile material. -Tool and instructions for use with list of spare parts.

Condition: excellent (used), Year of construction: 2017, MEP Shark 230 NC HS fully automatic metal bandsaw Fully automatic two-column bandsaw with semi-automatic function for 0° cuts of mild steel, stainless steel, steel alloys, solid and profile material, with max. 60 mm offcut length. Manufacturer: MEP Type: Shark 230 NC HS Year of manufacture: 2017 Condition: as good as new, used Cutting diameter round 230 mm Cutting diameter square 230 x 230 mm Speed 15 - 100 m/min. infinitely variable Dpsold Height of work surface 870mm Motor power 2,2kW Belt dimensions 2950x27x0.9 mm Length 1630mm Depth 1590mm height 1680mm Weight approx. 1000kg Coolant system Scope of delivery: - 4x new saw bands - operating instructions - Feed roller conveyor 3m

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. Bbakmxzy - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor Bohpnuex70 - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

Condition: new, Year of construction: 2024, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band. U7M2Zhqeq

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band Bh2Y32J7Ju

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker Bohnsazs7G - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Nw8Nv Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 0Carw8Klg Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: new, Year of construction: 2024, MEP SHARK 350 NC HS 5.0 Fully automatic two-column metal band saw Item number MEP SHARK 350 NC HS 5.0 Motor power 4,0kW Bench opening 355 mm band dimensions 4640x34x1,1 mm weight 2800 Kg speed 15 - 115 m/min. infinitely variable cutting surface 0° 350 / 350x350 mm cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: Automatic hydraulic band saw machine in two-column design for 0° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. Numerically controlled band saw machine which can also be operated semi-automatically, with the new MEP 50 Windows 2 "CE" based control system, specially developed by MEP for automatic machines. The standard equipment includes: Driven chip conveyor, installable on the right or left side of the machine. Clamping pressure regulation of the vices. Ckjuytac8D Feeder with vertical rollers for lateral material support. Clamping pressure regulation. 100 programs can be stored. The machine is available with 34 or 41 belt - without extra charge.

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. Cxj0P3Lm39 -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm 40 / 80 m/min 3650 x 27 x 0,9 mm 300 mm 260 mm 330 x 260 mm 260 mm 250 mm 270 x 200 mm 180 mm 170 mm 170 x 170 mm 870 mm 2,35 kW 0,7 t 2,7 x 1,6 x 2,0 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Dpsy9X Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically returned) Description: Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use Bh2Y90Vvr8

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame Dpdrxh - Opening the browstick

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm Puc7Ka capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 300 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 200 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm Bohshbfpoy engine output 1,5 / 1,8 kW dimensions of the machine ca. 1647 x 2157 mm weight 720 kg Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Control modes: - Manual mode - Semi-automatic dynamic operation - The semi-automatic cut is made by manually approaching the saw bow started in any position by actuating the hand switch - Semi-automatic operation (start / stop position of the saw bow is over the keyboard programmed, vice closes / opens automatically, the saw arch is automatically guided back to the start of the cut)

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 10/95 mm capacity 45 degrees: flat 135x60 mm engine 2,5 0 1700 / 3400 U/min weight of the machine ca. 600 kg dimensions 2,0 x 1,5 x 1,7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, for sawing of aluminum and light metal alloys for the use of HM circular saw blades. Bh30Ep8Mnf Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw machines with the new one specially designed by MEP for Automatic machines developed, Windows “CE” based control

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed Nw8N9 * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use Dqvgwv2Rc of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.