Used Mep Shark 332-1 Ccs for sale (126)

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round L 260 mm capacity 45 degrees: square L 250 mm Pgelhceppgdwodw Dek capacity 90 degrees: flat L 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm capacity 45 degrees: round R 200 mm capacity 45 degrees: square R 180 mm capacity 45 degrees: flat R 200 x 160 mm saw band length 3650 x 27 x 0,9 mm cutting speed 40 / 80 m/min total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,640 t dimensions of the machine ca. 1,2 x 1,7 x 1,7 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Description: CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) Either automatic or manual cutting cycle Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm with millimeter scale Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks

Condition: new, MEP SHARK 332-1 CCS metal band saw with semi-automatic lowering. MEP authorized dealer - please send us your inquiry! Motor power 1.5/1.8 kW Bench opening 335 mm Blade dimensions 3650 x 27 x 0.9 mm Weight 640 kg Speed 40/80 m/min. Cutting area 0° 300 / 260x260 / 330x260 Cutting area 45° right 260 / 250x250 / 270x200 Cutting area 45° left 200 / 180x180 / 200x160 Cutting area 60° right 180 / 170x170 / 170x170 Cutting area 60° left Description of the MEP sawing machine: Functioning in CCS version: After the material has been advanced and the vices have been closed, the cutting process begins. The lowering is controlled by the saw's own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for feeding the material. Electrical control panel (marked cable connections, operational readiness indicator light, main safety switch provided with padlock, switch or speed selector, emergency stop, thermal magnet protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vice with quick-lock mechanism Base frame with coolant tray and chip drawer, which can be replaced with a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw blade. Chip removal brush Adjustable precision stops for making cuts of consistent length. The machine is designed for pallet truck transport. Pgslhcdocgbt Row Dek Bimetal saw blade for solid and profile material Tools and operating instructions Motor 1.5/1.8 kW 2 speeds 40/80 m/min. Vice opening 335 mm Saw blade 3650 x 27 x 0.9 Weight 640 kg See image for cutting data For further technical data, please refer to the attached PDF document.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm Pelhcovixkzedw Degk capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm Pgslhcdjfg E H Tow Dsk band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, Model Name Pgslhcdogvquwow Djk Shark 332-1 CCS

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm 40 / 80 m/min 3650 x 27 x 0,9 mm 300 mm 260 mm 330 x 260 mm 260 mm 250 mm 270 x 200 mm 180 mm 170 mm 170 x 170 mm 870 mm 2,35 kW 0,7 t 2,7 x 1,6 x 2,0 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically returned) Description: Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Pjlhcdweuia D De Djgk Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice Pgolhcdwsvixzmj Dek - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Pjlhcsfg E H Usdw Degk Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, Model Name Pgslogvkafjhcdw Dek Shark 332-1 SXI evo

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) Polhcdevixypew Dogk * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Pgjlhcsfg E H Esdw Djk Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm dimensions of saw-band 3650 x 27 x 0,9 mm band speed 15 - 100 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round li. 260 / re. 200 mm capacity 45 degrees: square li. 250 / re. 180 mm capacity 45 degrees: flat li. 270x200 re. 200x160 mm capacity 60 degrees: round li. 180 mm capacity 60 degrees: square li. 170 mm capacity 60 degrees: flat li. 170 x 170 mm motor 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,9 x 1,8 m Control Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left). -Manual or semi-automatic dynamic cycle to make cuts outside of series production directly without programming. -Numerically controlled band saw machines with the new Windows “CE” based control, specially developed by MEP for automatic machines. FEATURES: -User interface with 7 ”touch screen display and mechanical keys for the operating functions of the sawing machine, guarantees reliable operation, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker -The control console on a swiveling arm enables comfortable and safe operation from any position. -Display and entry of alarm and error messages with the option of displaying incidents that have occurred. Pgslhouia D Rscdw Dok - Infinitely variable regulation of the cutting speed from 15 to 100 m / min via frequency converter (inverter). -The latest generation of hydraulic power pack, extremely powerful with low energy consumption. -Material feed with stepper motor via ball screw mounted on opposing ball bearings; 600 mm repeatable single stroke to saw any length. -Positioning of the saw head and movement of the feeder using a joystick. -Automatic detection of the cutting start position. -Hand-operated strap tension control with indication on the display by means of an electronic converter. -Automatic monitoring of the cutting load through a servo valve mounted directly on the cylinder. -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of the saw band) is built into the underframe -The chip drawer can be replaced by a motorized chip conveyor - see special accessories. -Preparation for the installation of the OPTIONAL minimum quantity lubrication system in addition to the conventional standard lubrication with emulsion oil. -Schipping brush. -Bimetal saw band for solid and profile material. -Tool and instructions for use with list of spare parts.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw Polhcdsvixwzew Degk * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush Pgolhcdjvixmcow Djk - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: used, Year of construction: 2004, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0.9 mm weight of the machine ca. 640 kg New price ~ 11.500 euros Furnishing: - automatic lowering of the saw arch, with steplessly adjustable feed - with limit stop at the end of the cut - manual / semi-semi-automatic function selectable - 2x saw band speeds - large bearing turntable, for miter cuts from 45° right - 60° left - Vice manually adjustable on both sides - manual material clamping - 1x saw band - rotating chip removal brush - Control panel - front right - hydraulic pressure cell for saw blade tension * with digital indication of the clamping force - User manual in German * Machinelink : ?machineno=1008-9173340 Polhju Sutuecdw Dsgk

Condition: used, Year of construction: 2016, cutting diameter 330 mm saw band length 4500 mm capacity 45 degrees: flat 300 x 300 mm capacity 45 degrees: round 320 mm capacity 45 degrees: square 300 x 300 mm capacity 60 degrees: flat 200 x 250 mm capacity 60 degrees: round 210 mm capacity 60 degrees: square 200 x 200 mm capacity 90 degrees: flat 450 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 20 - 100 m/min dimensions of saw-band 4500 x 34 x 0.9 mm Pelov Eg Utehcdw Degk vice 455 mm total power requirement 1.5 kW weight 1140 kg range L-W-H 1700 x 1880 x 1650 mm Machine in good condition (!!) including replacement saw blades Equipment: - robust electro-hydraulic band saw - miter cuts from - 60° left to + 60° right - hydraulic unit for automatic saw bow raising - continuously adjustable saw bow lowering - mechanical reduction gear for band speed 20-100 m/min. - swiveling control panel - saw blade guide heads on linear guides - robust/stable vice with quick adjustment and linear guides - base frame with coolant tray and chip tray - designed for pallet truck transport - operating instructions DE (PDF)

Condition: used, Year of construction: 2009, cutting diameter 300 mm saw band length 3320 mm cutting width 330 mm 3320 x 27 x 0,9 mm 15 + 100 m/min 300 mm 260 mm 330 x 260 mm 180 mm 170 x 170 mm 170 mm li. 260 / re. 200 mm li. 270x200 / re. 200x160 mm li. 250 / re. 180 mm 2,2 kW 1060 kg 2300 x 1945 x 2000 mm Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Pelhotxcypecdw Dogk Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band

Condition: new, saw band dimensions 2950x27x0,9 mm Polhcdjh Dmh Hsw Dsgk 2 speeds 36/72 m/min vice opening 285 mm cutting range at 90 degrees: round 250 mm cutting range at 90 degrees: square 230 mm Cutting range at 90 degrees: flat 280x200 mm Cutting range at 45 degrees: around 190 mm Cutting range at 45 degrees: square 180 mm Cutting range at 45 degrees: flat 180x180 mm Cutting range at 60 degrees: around 120 mm Cutting range at 60 degrees: square 110 mm Cutting range at 60 degrees: flat 110x110 mm Total power requirement 1,5/1,8 kW weight 375 kg Dimensions 1700x1000x1650 mm Equipment: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the saw bow by the by the weight of the saw head. - The lowering speed is infinitely variable. Single cuts can thus be be carried out with uniform feed

Condition: as good as new (ex-display), Year of construction: 2023, saw band length: 2,950 mm, saw band width: 27 mm, type of input current: DC, cutting capacity: 285 mm, cutting range round at 45°: 230 mm, cutting range round at 90°: 250 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description Polhcewa Spdedw Degk MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: new, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Item number: SH281CCS motor power 1,5/1,8 kW band opening 285 mm band dimensions 2950x27x0,9 mm weight 375Kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230/ 280x200 cutting area 45° right 190 / 180x180/180x180 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description: -Saw band arch, vise unit and base made of resistant cast iron. -Precision degree marking on the cast iron structure -Electrical system (with fully identifiable electrical wiring and low voltage 24 V system) -Switching handle IP 55 for manual cycles (if present) -Rotating scraper brush for the saw band -Closing unit with vice for fast approaching -Accurate stops with adjustment for miter cuts at 0°, 45°, 60° on the left side -bi-metal saw band 2950 x 27 x 0,9 mm -Wrench, instructions for use and instructions for ordering spare parts in the user's language -SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. -CCS (Cut Control System) with (A switch for manual and automatic cutting - B) regulation of cutting speed - C) hydraulic brake with tank - D) end stop for stopping the belt) also available as an option for machines already in production. -Vice with quick adjustment -Hydraulic transducer for belt tension indication -Electric coolant pump for cooling and lubrication of the saw band and manageable coolant tank above the base frame -For the versions with pneumatic vice (MA), the opening and closing of the vice is done with a manual valve (available as an option with pedal control) MEP SHARK 281 SXI evo [Semi-automatic] Part number SH281SXI motor power 1,5/1,8 kW Pelhscgbp Iscdw Dogk belt opening 285 mm belt dimensions 2950x27x0,9 mm weight 435 kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230 / 280x200 cutting area 45° right 190 / 180x180 / 180x180 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Semi-automatic function: Vise closes and motor starts, saw head lowers for cut, motor shuts off, saw head raises, vise opens. Some features: - New centralized control panel on articulated arm. - Latest generation hydraulic control unit, highly efficient and with low energy consumption. - Base with extractable coolant tank. The machine complies with CE regulations in all areas! For further technical data, please refer to the attached PDF document.

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left Pslhcjppgddjdw Degk -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: new, saw band dimensions 2950x27x0,9 mm 2 speeds 36/72 m/min vice opening 285 mm cutting range at 90 degrees: round 250 mm cutting range at 90 degrees: square 220 mm Pgelhcdweh Dmice Dok Cutting range at 90 degrees: flat 280x220 mm Cutting range at 45 degrees: round 230/200 mm Cutting range at 45 degrees: square 200/170 mm Cutting range at 45 degrees: flat 220x200/200x140 mm Cutting range at 60 degrees: round 120 mm Cutting range at 60 degrees: square 80 mm Cutting range at 60 degrees: flat 140x100 mm Power 1,5 / 1,8 kW weight 440 kg Dimensions 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the saw bow by the by the weight of the saw head. - The lowering speed is infinitely variable. Single cuts can thus be be carried out with a uniform feed rate - The SHARK 282 CCS has a rotary table for mitering on both sides. The cut thus always takes place in the same groove

Condition: new, MEP band saw machine SHARK 331-1 NC 5.0 Spider All MEP models on request ! Motor power 2,2 kW band opening 340 mm belt dimensions 3650x27x0,9 mm weight 1.240 Kg speed 15 - 100 m/min. infinitely variable cutting area 0° 280 / 260x260 / 330x260 cutting area 45° right 260 / 250x250 / 270x200 Cutting surface 45° left Cutting area 60° right 180 / 170x170 / 170x170 Cutting surface 60° left Description Hydraulic bandsaw fully automatic Miter cuts up to 60° left possible saw band length: 3650x27x0,9 Single stroke: 600 mm (programmable up to 10m) Simple touch screen operation. Saw arm made of Spheroguss - robust and stable Required floor space 3,4 m² Footprint 1900mm wide x 1800 mm deep For further technical data please refer to the attached PDF document. Pgelhcjchhdisdw Dek

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm 2950 x 27 x 0,9 mm 285 mm 36 / 72 m/min 250 mm 220 mm 280 x 220 mm 120 mm 140 x 80 mm 80 mm 200 mm links 220 x 200 / rechts mm links 200 / rechts 170 mm 1,86 kW 0,4 t 1,8 x 1,3 x 1,8 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Peloppgdashcdw Dsgk Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS Pgjlhechhfuecdw Djk motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.