Used Okuma Machining Center for sale (175)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,082 h, functionality: fully functional, machine/vehicle number: 114599, turning length: 541 mm, turning diameter: 210 mm, travel distance X-axis: 192 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, TECHNICAL DETAILS Hsdpfsw Ekruox Afpsfn Machining specifications Turning length: 541 mm Turning diameter: 210 mm Axes and travels X-axis travel: 192 mm Y-axis travel: 50 mm Z-axis travel: 700 mm Spindle Spindle speed: 6,000 rpm Spindle motor power: 11 kW Feed X-axis feed rate: 30 m/min Z-axis feed rate: 40 m/min MACHINE DETAILS Electrical data Supply voltage: 400 V Phases: 3 P Frequency: 50 Hz Operating hours On time: 92,265 h Spindle hours: 23,082 h Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The machine will remain powered until the end of the auction, after which it will be dismantled.

Condition: used, Horizontal machining center, 6 pallets Priced to sell - dismantled and loaded into truck OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600*710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. 200 TOOLHOLDERS ARE AVAILABLE X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy) X: 560 pallet: 6 Pallet size: 400*400 Hjdpfx Aet Ek Slefpofn

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Hjdpfewxb Erox Afpofn Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Year of construction: 1998, condition: ready for operation (used), Control Unit Brand Okuma Model OSP 7000L Turret Number of turrets 1 Hjdpfjwx Szwsx Afpjfn Tool taper VDI40 Media Chip conveyor Yes Additional Equipment Robot interface In-process measuring Bar feed HYDRO-SAMECA QS 7.52 with diameter reduction tubes: 53, 46, 40, 34, 27, 22, 17 mm SAMECA bar feeder QUICKSAM 7.52 complete with a basic unit Max. Capacity 52 mm, length 3100 mm, Total length 4900 mm Drum with guide tubes capacities: 16, 20, 26, 32, 38, 45, 52 mm Hydraulic unit Capacity 80 liters With tailstock This Okuma LB15II was manufactured in 1998. It features a 12-position VDI40 turret, chip conveyor, OKUMA OSP 7000L control, and a SAMECA bar feeder. Additionally, it includes a robot interface, in-process measuring, and a programmable workpiece chute. If you are looking to get high-quality turning capabilities, consider the Okuma LB15II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2000, 🔧 FOR SALE – OKUMA MX 45 VAE Vertical Machining Center 📍 Available immediately: OKUMA MX 45 VAE vertical machining center in excellent condition, ready to integrate into your workshop! 📌 Key Features: ✅ Brand: OKUMA ✅ Type: Machining Center ✅ Model: MX 45 VAE ✅ CNC: OSP-U10 M ✅ Year: 2000 ✅ X-travel: 760 mm ✅ Y-travel: 460 mm ✅ Z-travel: 450 mm ✅ Speed: 7000 rpm ✅ Table surface: 1000 x 460 mm ✅ Max. table load: 1000 kg : 500 kg ✅ Internal coolant supply ✅ Tool magazine for 20 tools ✅ Tool holder: SK 40 ✅ Cutting speed x, y, z: 10 m/min ✅ Rapid traverse x, y (z): 20 (15) m/min ✅ Dimensions: 1,800 mm x 2,380 mm x 2,650 mm 📸 See photo below (machine visible on site) 📦 Condition: Very good 💰 Price: upon request Hfedpowwkuaofx Afpon 👉 Do not hesitate to contact us for more technical information, additional photos, or a visit.

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, spindle motor power: 15 W, rapid traverse X-axis: 15,000 m/min, rapid traverse Z-axis: 20,000 m/min, OKUMA LB15II-MW CNC Turning Center The OKUMA LB15II-MW is a dual-spindle CNC turning center with a driven tool turret, designed to ensure high precision, flexible productivity, and complete machining in a single setup. Perfect for complex turning operations and series production. General data: Year of manufacture: 1996 CNC control: OKUMA OSP7000L Machine weight: 5,900 kg Dimensions (LxWxH): 3,315 x 1,895 x 1,905 mm Machining capacity: Max swing over bed: Ø530 mm Max turning diameter over cross slide: Ø340 mm Hsdpfx Ajwxypiofpofn Max turning length: 1,000 mm Distance between centers: 1,020 mm Spindle bar capacity: Ø62 mm Axes and travels: X axis: 260 mm Z axis: 1,020 mm C axis: 0.001° (full 360° continuous control) Spindles: Main Spindle: Speed: 45 – 4,500 rpm Spindle nose: ASA A2-6 Power: 11/15 kW (cont. 20/30 min) Sub-Spindle: Speed: 45 – 4,500 rpm Spindle nose: ASA A2-5 Power: 7.5/11 kW Turret: 12 stations (powered tool positions available) Tool dimensions: 25 x 25 mm / Ø40 mm boring bars Powered tool speed: 3,000 rpm Included tooling: 17 fixed tools (10 boring bar holders + 7 external turning holders) 6 powered tools (3 angle heads + 2 double axial + 1 single axial) Feed rates: X-axis rapid traverse: 15,000 mm/min Z-axis rapid traverse: 20,000 mm/min Equipment and accessories: LNS MOVE bar feeder, capacity up to 3,200 mm Mayfran chip conveyor Coolant tank with wash-down pump High-pressure pump with integrated tank Tool presetting arm Manuals, electrical diagrams, and CE declaration A complete and compact solution, ideal for bar machining and secondary operations on the sub-spindle. The presence of the driven tool turret enables complex processes in a single cycle, reducing both machining and setup times.

Condition: ready for operation (used), Okuma DC-S1A DC Power Supply 4 Axes CZ-270C , serial no. according to photo ,used, normal signs of use, 100% functional Hfsdpji Ecanofx Afpsn

Condition: good (used), Year of construction: 2018, operating hours: 6,177 h, functionality: fully functional, machine/vehicle number: L3M0060, turning length: 450 mm, turning diameter: 300 mm, rotational speed (max.): 4,500 rpm, bar diameter (max.): 69 mm, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. swing diameter: 520 mm Max. turning length: 450 mm Main spindle Bar capacity: 69 mm Spindle nose: ASA8 Spindle motor power: 22 kW Spindle speed: 20 / 42 m/min Spindle chuck diameter: 10″ Driven tools Power: 7 kW Speed: 4,500 rpm Tailstock Tailstock taper: MT5, rotating Hsdpeww Ikxofx Afpofn MACHINE DETAILS Power-on time: 8,666 h Spindle hours: 6,167 h CNC control: CNC OSP P300LA-e (15″) Weight: 5,000 kg Connected load: 28.6 kVA Total power-on time: 16,620 h CNC control operation time: 8,667 h Spindle run time: 6,177 h Cutting time: 6,004 h EQUIPMENT - Manual presetting device - Roller-type chip conveyor - Rotating MT5 tailstock - High-speed driven tools - CNC control with large 15″ screen

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm Hsdewq Rpwepfx Afpofn X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: excellent (used), Okuma lc40 spindle stock Hsdewqgb Nepfx Afpjfn

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine Hfjdpfx Astqu U Tofpsn

Condition: used, CNC control, control panel, machining center Hfsdodtcrkepfx Afpon -Disassembled from a: CNC lathe Make: Okuma type LB15 -complete unit -Dimensions: 790/600/H495 mm -Weight: 79 kg

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Hedpfji Ecarex Afpofn

Condition: not inspected (used), Seriennummer: 0697 Hsdpfx Afswm Rrqjpofn

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 1,250 mm, turning diameter: 300 mm, Okuma Genos L300E-M Condition: very good (used) Year of manufacture: 2011 Technical details Okuma Genos L300E-M CNC lathe including Samsys M3000ST bar feeder Control system: OSP-P200L-R Hedpfjv Twxljx Afpsfn Turning length: 1,250 mm Turning diameter: 300 mm Spindle bore: 70 mm Turret: 12 positions – all driven Speed: 45 – 4,500 rpm Tool holder: VDI 40 Equipment / Accessories Chip conveyor 3-jaw chuck Ø 250 mm Hainbuch collet chuck Touchsetter Tailstock Coolant pump Samsys Multi 3000SL bar feeder Various accessories (see pictures)

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hfodpfx Aei Ecayofpsn

Condition: used, Seriennummer: 0419 Hedpfswm Rrdex Afpofn

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, Okuma Genos L300E-M Condition: very good (used) Year of manufacture: 2014 Technical details Control: OSP-P300L-R Turning length: 1,000 mm Turning diameter: 300 mm Spindle bore: 68 mm Turret: 12 positions – all driven Speed: 45 – 4,500 rpm Tool holder: VDI 40 Travel: X-axis: 235 mm Z-axis: 1,144 mm Equipment / Accessories Chip conveyor Hedpfev Twngox Afpofn Chuck Ø 250 mm Touchsetter Tailstock Coolant pump

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Hjdpfx Aoi Ecacefpefn

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-102 , serial no. according to photo ,used, normal signs of wear, 100% functional Hfjdpfx Afei Ecagopen

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A / 1911-1509-44-90, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Hfodpfxsi Eca De Afpjn

Condition: ready for operation (used), Okuma DC Power Supply 6 Axes PCB with E4809-436-002-A, used, normal signs of use, 100% functional Hodpfx Aoi Ecakofpefn

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Hfjdot Izafopfx Afpen

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Hfedpfx Afji Eca Ijpsn

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Hfodpfx Aei Eca Sefpen