Used Battenfeld Extruder for sale (114)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 58211, clamping force: 4,500 kN, The machine is powered and can be demonstrated in working condition. Ihedex Af Ayopfx Ahust

Condition: excellent (used), Year of construction: 2007, operating hours: 20,357 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 56 g, overall weight: 6,000 kg, Equipment: documentation/manual, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine dealership. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesale supplier of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machines: As of 01.07.2025, used machines may also be depreciated using the special 30% annual depreciation allowance. In addition to the lower purchase cost compared to a new machine, you can claim the same depreciation amounts as for a new machine. Reference: Growth Booster (§ 7 Section 2 EStG-E) Vertical injection moulding machine – thermoplastics, with rotary table, 2 or 4 stations Manufacturer: Battenfeld Model: Vertikal R 60 / 125 H Control: B4 Year: 2007 Machine number: 130953 – 100 Ihsdpfx Ahex Ak I Ijust Vertical machine with rotary table / 2-4 stations (750 mm) Operating hours: 20,357 h Injection unit (125) Screw diameter: 25 mm Screw length: 21.6 L/D Shot volume: 58.9 cm³ Shot weight: 53.6 g Heating capacity: 6.78 kW Heating zones: 4 Nozzle stroke: 200 mm Injection pressure: 2,149 bar Clamping unit Clamping force: 60 tons / 600 kN Opening stroke: 250 mm Min. mould installation height: 250 mm Ejector stroke: 150 mm Max. platen distance: 500 mm Rotary table diameter: 1,040 mm Weight: 6,000 kg Extras: - Light curtain - Automatic suction loader Simar FX 2504, year 2013 - Water manifold - Air valve

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Ihjdpfx Ahsu Eki Seuot Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar Iodpfx Asx A Df Tshueht MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s Isdpox A Dbbofx Ahujht MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Ijdpfex A A S Ejx Ahuoht Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Ijdsx A A E Ejpfx Ahueht Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Ihjdpfx Ahsx A A Akjust Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Operating hours: 49,462 h EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Net weight: 23,500 kg / 8,500 kg Ihsdpjxyizhsfx Ahuet Hydraulics – Operating pressure: 231 bar Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m Ihodpfx Aoxyqxushuot The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines Ihjdpfxexyqw Ro Ahujt The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: good (used), Year of construction: 1997, This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Ihodpsxu E T Aofx Ahujt Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

Condition: used, Year of construction: 2002, Injection moulding machine Battenfeld HM 1000/1440, year 2002. Screw from Battenfeld: 135 mm. The machine is equipped with a single-cavity shut-off nozzle for the mould, as well as a shut-off in the injection unit. The Battenfeld currently has 87,545 operating hours. The machine is still in production. Ijdpsxwlmnsfx Ahusht

Condition: used, Year of construction: 2014, clamping force: 270 kN, displacement volume: 653 cm³, injection pressure: 2,041 bar, overall weight: 12,500 kg, load hours: 35,000 h, screw conveyor diameter: 55 mm, Freight basis: ex-site Ijdew U Et Dopfx Ahuoht Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Ihodpfx Ahjxdk Aueujt Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

Condition: used, Battenfeld plasticising screw Ø 18 mm- as good as new - removed from Battenfeld VM75/60/60 R1040 - removed from running machine Ihedpeu Tv A Dofx Ahust - fully functionalinlet: 17,80 mm centre: 17,80 mm outlet: 17,80 mm stroke volume: 22.9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm spare part no.: 100TM842 Dition: neuwertig

Condition: excellent (used), Year of construction: 2003, Battenfeld HM1300/350 Year of manufacture: 2003 Clamping force: 130 t Screw diameter: 40 mm Isdpfx Ahsxwmx Sjueht Operating hours: 77,890 h Tie bar spacing: 42x42 cm

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 t Screw diameter: 40 mm Operating hours: 77,890 h Ihedpfxsxvihmj Ahust Tie bar distance: 42 x 42 cm

Condition: excellent (used), Year of construction: 2002, Battenfeld TM 4500/4500 B4 Year of manufacture: 2002 Clamping force: 450 tons Ihsdpfxjxvihas Ahuet Screw diameter: 85 mm Injection weight: 1870 g Tie bar distance: 80x80 cm

Condition: excellent (used), Year of construction: 2002, Battenfeld 4500/4500.B4 Year: 2002 Clamping force: 450 tons Screw diameter: 80 mm Ijdpfxjxvig Ao Ahuoht Injection weight: 2150 g Tie bar spacing: 80x80 cm

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Ihodpfx Ahjxq Exqeuet

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 8084/11/30, Saw for profile extrusion Ihsdpfxoxghrxj Ahust

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 8084/77/10, Haul-off 350 mm Ihodoxghq Ijpfx Ahuot

Year of construction: 1994, condition: used, machine/vehicle number: 8084/77/01, Caliber Table Profile Extrusion Ihjdpfx Ajxghqhjhuot

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw diameter 75 mm Drive Baumüller 171 KW RPM 2,450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Connection value: 69 Kva Output approx. 110 kg/h Year of manufacture: 2010 Isdjug Edkopfx Ahueht The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany