Used Baykal Press Brake for sale (52)

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Bodpfxsrq D Nij Aldjwn Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 2001, operating hours: 2,500 h, total length: 3,540 mm, total width: 1,500 mm, total height: 2,330 mm, Colour: Grey Weight: 8.230 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 5356 - Operating hours: 2500 - Drive system: Conventional Bwsdpfjy Thmxsx Aldjn - Power [kW]: 11.0 - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 200 - Tools included: Yes - Transport dimensions: 3540mm x 1500mm x 2330mm (l x w x h) - Transport weight [kg]: 8230kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Colour: Grey Weight: 10.400 kg Price: On request - Year: 1994 - Documentation available: No - CE certificate present: No Bwsdpjybdtcjfx Aldjn - Serial number: 1776 - Drive system: Conventional - Power [kW]: 22.0 - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 - Tools included: Yes - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Colour: Grey Weight: 10.000 kg - Year: 2007 Bwodpfxsyf Edwe Aldjn - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC - Power [kW]: 11.0 - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004, Used conventional press brake by Baykal Type APH 3110 180 Capacity 3100 x 180 tons Bjdpfx Alsy Tuiyedown Adjustable back gauge and stroke adjustment Amada / Euro clamping system Includes 1 set of tooling

Condition: excellent (used), Year of construction: 2021, Bending length: 4100 mm Pressing force: 240 tons Equipped with a comprehensive tool set for bending Manufacturer: Baykal Model: APHS 41240 Bodeymldgspfx Aldswn Power supply: Three-phase Year of manufacture: 2021 Serial number: 28635 Axes: Y – Raise/lower beam X – Adjustment of approach and bending paths R – Approach/descent Bending angle compensation

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Stock machine // Subject to prior sale CNC-controlled press brake in all-steel welded construction with DELEM DA66S control, HAWE hydraulics, Fiessler AKAS II laser safety system, and CNC-controlled table crowning Technical data: - Maximum pressing force: 160 tons Bwodpfxoy Anftj Aldjn - Bending length: 3100 mm - Bending length between uprights: 2550 mm - Throat depth: 410 mm - Table width: 60 mm - Table height from floor: 870 mm - Installation height: 530 mm - Max. ram stroke: 260 mm - Closing speed: 200 mm/sec - Pressing speed: 10 mm/sec - Return speed: 160 mm/sec - Max. backgauge travel (X axis): 750 mm - Max. backgauge travel (R axis): 150 mm - Backgauge traverse speed in X axis, servomotor: 330 mm/sec - Backgauge positioning accuracy: +/- 0.03 mm - Motor power: 15.0 kW - Oil tank capacity: 180 l Equipment / Standard accessories: - CNC control “DELEM DA66S” for user-friendly graphical product programming. The controller calculates the bending sequence and all axis positions (including collision warning) at the push of a button, 24” TFT color touchscreen display, USB interface, network connectivity, and tool database for 100 punches and dies each. Graphical 2D programming, 2D preview during operation, up to 12 axes plus auxiliary functions. Includes PC programming software “Profile - TL" and remote service (teleservice) via TeamViewer. - Manual quick-clamp system for upper tools, Promecam/AMADA type, with screw lever, safety nose, and plastic pressure bar for secure clamping, even with narrow tools. Max. load: 100 t/meter - Split upper tool, "Amada System," manufacturer Italy, material C 50 (HRC 50-52), induction hardened and ground on work faces. Bending capacity: 100 t/meter. Standard delivery, division: 3 x 835 mm, horns left and right 100 mm each, remainder in smaller segments. Height: 66.6 mm - Lower tool / 4-way prism block CroMo 4, ground, 60x60 mm, standard V-openings: 16 - 22 - 35 - 50 mm - Modern design for side and top covers - Side safety covers with magnetic closure for quick opening/closing during tool changes - 2-axis backgauge system with ball screw drives and servo motors, CNC controlled, max. X-axis range 750 mm, R-axis 150 mm. Positioning accuracy +/- 0.03 mm, traverse speed: 330 mm/sec. Includes 2 laterally adjustable stop fingers. - "FIESSLER" double-beam laser safety system, type AKAS/LCII. Operation of the press only possible via foot pedal. Manually adjustable via linear guides in both vertical and horizontal axes for extremely easy and quick adjustment after tool changes. - Automatic motorized table crowning system WILA, integrated into the CNC - Front sheet supports (2 pcs) laterally movable on linear guides, height-adjustable by handwheel - Central lubrication with hand pump - Spring-back compensation via CNC - Oil fill - Operating manual in German with spare parts list - Hydraulic manifold, valves by HAWE/HOERBIGER - Hydraulic pump: tandem pump by HAWE - Relays and contacts: Schrak, Pilz, Siemens, Eaton or Telemecanique - CE conformity - Operating hours counter - Dual-color paintwork: Body RAL7015 slate grey; covers, swing arm and controller housing: RAL7035 light grey; support arms and front of side covers

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Bwodpfx Alovgc R Hjdon Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Year of construction: 2006, condition: like new (used), Rushworth Baykal APHS 3106×120 3metre x 120ton hydraulic down stroke cnc pressbrake for sale Very clean downstroke Baykal 4axis cnc pressbrake for sale – complete with a large amount of tooling Bjdpfx Aeikfz Djldown Year 2006 Model Aphs 3106 x 120 Euro tooling Total 4axis Y1,Y2,X and R axis Wila crowning system 4 fingers on the backstop, ideal for extra support when folding your full 3metre length and intricate small parts Large selection of tooling 49cm daylight Euro tool clamps Quick release clamps Modern Delem DA-56 cnc control with usb Hydraulic down stroking pressbrake Delivery, installation and training available

Condition: new, The APHS MAX is a custom-engineered, heavy-duty press brake developed for large-scale and special bending applications. It is designed to meet the demands of industries requiring extra-long, high-tonnage, or custom-configured press brakes. This model combines power, precision, and adaptability, making it ideal for processing oversized workpieces and fulfilling unique production requirements. Bjdpfxswnagto Aldewn

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 260 mm, throat depth: 410 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19, working width: 3,100 mm, bending force (max.): 200 t, distance between stands: 2,550 mm, control type: CNC control, degree of automation: automatic, Baykal APHS PRO 31200 CNC Press Brake The Baykal APHS PRO 31200 is a CNC-controlled press brake constructed with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser safety system (AKAS / LCII), as well as a CNC-controlled crowning system, and is operated via a Cybelec Visitouch 19MX 3D control unit. Technical Specifications: Pressing force: 200 t Bending length: 3100 mm Bending length between frames: 2550 mm Throat depth: 410 mm Table height: 880 mm Max. ram stroke: 260 mm Motor power: 18.5 kW Oil tank capacity: 210 l The 5-axis backgauge (X + R + Z1 + Z2 + X5) enables precise positioning. The positioning accuracy is ±0.03 mm, and the travel speed along the X-axis is 330 mm/s. Control System: The Cybelec Visitouch 19MX offers intuitive operation via a 19" touchscreen with 3D visualization and simulation. Parts can be imported as DXF flat patterns or 3D files. Features such as automatic bending sequencing, backgauge positioning, and tool setup assist with programming complex parts. Bedpeyrgcnefx Aldjwn Equipment: - Fiessler AKAS / LCII laser safety system - Automatic motorized table crowning (WILA system) - Manual quick-release clamping, Promecam / AMADA style - 2 front sheet supports, laterally adjustable - Centralized lubrication - Hour meter - CE compliance Machine Data: Year of manufacture: 10/2025 Serial number: 31880 Weight: 11,500 kg Dimensions (L×W×H): 3820 × 1800 × 2700 mm The machine is in stock and available for immediate delivery. The warranty is 12 months for single-shift operation.

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 260 mm, throat depth: 410 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19, working width: 3,100 mm, bending force (max.): 160 t, distance between stands: 2,550 mm, control type: CNC control, degree of automation: automatic, Baykal APHS PRO 31160 CNC Press Brake The Baykal APHS PRO 31160 is a CNC-controlled press brake with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser protection (AKAS / LCII), and a CNC-controlled crowning table. Operation is via a Cybelec 2D CNC control unit. Bsdpfx Alsyrf Upsdswn Technical specifications: Press force: 160 t Bending length: 3,100 mm Bending length between uprights: 2,550 mm Throat depth: 410 mm Table height: 870 mm Max. ram stroke: 260 mm Motor power: 15 kW Oil tank capacity: 180 l The 2-axis backgauge (X-R) is driven by AC servo motors and provides a positioning accuracy of ±0.03 mm. Travel range: X = 1,000 mm; R = 160 mm; travel speed: 330 mm/s. Two laterally adjustable stop fingers are included. Equipment: - Cybelec 2D CNC control - Fiessler AKAS / LCII laser safety - Automatic motorized crowning table (WILA system) - Segmented upper tooling, Amada system - Manual quick-release clamping system Promecam / AMADA - 2 front sheet supports, laterally adjustable - Central lubrication - Operating hours counter - CE compliance Machine details: Year of manufacture: 10/2025 Serial number: 31865 Dimensions (L×W×H): 3,820 × 1,800 × 2,700 mm The machine is in stock and available for immediate delivery. Warranty: 12 months for single-shift operation.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, pressing force: 40 t, BAYKAL CNC press brake Mod.: APHS-C 125040 Unused SN: 28542 YEAR OF MANUFACTURE: 09/2021 in the following version: - DELEM control system DA-58T 2D-graphics with touch screen - CNC controlled backgauge with ball screws, X-axis 750 mm + 250 mm, R-axis = 130 mm - Manual table crowning - AKAS laser safety device - Safety cover on the side and rear - 2 pcs. Front support arms on linear guides - Top system tool holder - System tool holder at the bottom - Technical documentation - CE version - Colors: * RAL 7015 - slate gray * RAL 7035 - Light gray * RAL 3003 - Ruby red Technical data: - Pressing pressure: 40 t - Working length: 1,250 mm - Motor connected load: 4 kW - Oil tank volume: 80 lt. - Departure speed: 160 mm/sec. - Working speed: 10 mm/sec. - Retraction speed: 130 mm/sec. - Folding length: 1,250 mm - Stand passage: 1,070 mm - Stand depth: 1,470 mm - Table height: 800 mm - Machine height: 2,250 mm - Installation height: 455 mm - Stroke: 215 mm - Table width: 60 mm - Projection: 410 mm Bwsdetz Azdjpfx Aldon - Weight: 3,300 kg Subject to errors and prior sale!

Condition: ready for operation (used), Year of construction: 2020, total height: 2,220 mm, overall weight: 14,000 kg, controller manufacturer: BOSCH, controller model: MTX, number of axes: 6, This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic Motor Power: 11 kW • Axes Drive Type (C1 and C2): Direct drive • Hydraulic Punching Force: 30 tons • Portable CNC Control Panel • Work Chute: Automatic system to take out cut parts • Mobile Storage Box for Cut Parts • Waste Box • Light Barriers Machine Benefits Technical Machine Benefits • Ce conformity Bwjdszbiybepfx Alden • Maximum sheet thickness: 6. 4 mm • Maximum punching rate: 1 mm nibbling: 900 hits/min 25 mm nibbling: 580 hits/min • Maximum punching diameter (for 6. 4 mm thickness): 25 mm • Number of clamps: 3 • Tables: movable in y axis • Table height: 980 mm • Movable table: 1300 × 5200 mm with ball transfers Extra Information The machine is in excellent condition, has only a few hours of operation, and is like new. Control Unit Control: Bosch MTX Operating System: Windows Hard Disk: 150 GB CPU: 2 GHz RAM: 2 GB Data Transfer: USB stick memory Display: 12" TFT LCD color screen Movement Axes: 6 (X, Y, Z, C1, C2, T) Axis Speeds: X: 100 m/min Y: 80 m/min X + Y combined: 128 m/min C1 / C2 rotation: 300 rot/min T axis: 20 rot/min Repositioning: Available Positioning Accuracy: ±0.1 mm Repeatability: 0.04 mm CAM Nesting Software: Lantek Turret Tool Rotation: Indexable Multitools Support: Available (3 or 8 tools) Total Number of Tool Stations: 20 Indexable Tool Holders: Standard 4 (option up to 10) Tool Change Time (multitools): 0.3 s Maximum Tool Change Time (turret): 3 s Dimensions Machine Depth 6370 mm

Condition: ready for operation (used), Year of construction: 2020, stroke length: 260 mm, total height: 2,675 mm, overall weight: 8,400 kg, controller manufacturer: DELEM, controller model: DA-66T, number of axes: 4, This 4-axis Baykal APHS 31120 press brake was manufactured in 2020. It features a 120-ton press force, a bending length of 3100 mm, and a Delem 66t CNC control unit for precise operations. The backgauge X range extends to 1000 mm, and it includes European clamping with a sectioned punch and die. Consider the opportunity to buy this Baykal APHS 31120 press brake. Contact us for more information about this machine. Additional equipment • AC brushless servo driven backgauge with ballscrews • Proportional valve hydraulics: Rexroth or Hoerbiger • Precision linear scale measurement: Heidenhain or Givi Misure • European clamping system with 85° sectioned punch and 4-V die • Double footswitch console • Electrically interlocked side guards Machine Benefits Technical Machine Benefits • System pressure: 280 bar • 4-axis press brake (y1, y2, x, r) • Distance between frames: 2550 mm • Throat gap: 410 mm • Max. Stroke adjustment: 260 mm • Backgauge x range: 1000 mm (x and x-r types) • Backgauge fingers: 2 pcs Bwodpjzbcnfjfx Aldjn • Cnc crowning wedges on bottom table • Tooling is included in the offer • Excellent condition, almost like new Extra Information Movement Approach Speed: 160 mm/s Working Speed: 10 mm/s Return Speed: 130 mm/s Table Width: 60 mm Voltage: 400 V / 50 Hz / 3 Ph Delem 66t color graphical Windows CNC control unit Technical Specification Bending Length 3100 mm Dimensions Machine Depth 3850 mm

Condition: ready for operation (used), Year of construction: 2020, total height: 3,470 mm, overall weight: 23,500 kg, controller manufacturer: DELEM, controller model: DA-66T, number of axes: 4, This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information. Additional equipment • Control Console: Double footswitch console Machine Benefits Technical Machine Benefits • Machine in excellent condition, with very low working hours – practically like new • Some tools are included in the offer • Stroke axes: Y1–Y2 cnc controlled • Backgauge x range: 1000 mm • Backgauge fingers: 2 pcs • Stroke length: 330 mm Bedpfxjzbcm Uo Aldown Extra Information Tools Upper Tool Weight: 700 kg Lower Tool Weight: 1200 kg Clamping System: Heavy duty top clamping system Tooling System: European clamping system with 85° sectioned punch and 4-V die Crowning: CNC crowning on bottom table Front Support Arms: 2 pcs on linear rail Safety: Electrically interlocked side guards, light barriers Dimensions Machine Depth 4100 mm Technical Specification Bending Length 3100 mm

Condition: ready for operation (used), Year of construction: 2020, total height: 2,500 mm, number of axes: 4, This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Additional equipment • Dust & Fume Extraction System: • Air Flow: 12000 m³/h • Filter Area: 171 m² Machine Benefits Technical Machine Benefits Bsdpfx Alszbcmujdswn • Cutting table size: 3000 × 6000 mm • Tubes cutting capability: yes • Control system: texnos pc 12 or hypertherm microedge pro • Software: hypertherm cam / cnc with arcglide thc height control • True hole technology: supported with hprxd system – enables high-quality hole cutting up to 12 mm thickness. Extra Information Machine still under power Dimensions Machine Depth 8100 mm

Condition: good (used), functionality: fully functional, Year of construction: 2018, Sheet metal width: 3100 mm Sheet metal thickness: 6 mm Total power: 12.5 kW Machine weight, approx.: 5500 kg Space requirement, approx.: 3860 x 2560 x 1560 mm Equipment: - Manual cut gap adjustment - Digital back gauge, 1000 mm - Angle stop - 2 support arms - Foot switch - Cutting line illumination - Protective grid behind the machine Bodpfx Ajzbbbwoldswn

Condition: new, functionality: fully functional, Sheet metal width: 3060 mm Sheet metal thickness: 6 mm Stroke rate: 20 strokes/min Stroke: 750 mm Motor power: 11 kW Oil capacity: 160 l Bedpfszbbbkox Aldown Machine weight (approx.): 5,500 kg Dimensions: 3860 x 2560 x 1560 mm

Condition: new, Die block, 80 x 80 mm with V-grooves approx. 86°, length 2500 mm Bwjdpfx Alsy Uxw Dedon

Condition: used, Year of construction: 2008, total length: 4,900 mm, total width: 2,400 mm, total height: 1,750 mm, Colour: White Weight: 9.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes Bwodpey Tnzvsfx Alden - CE certificate present: No - Serial number: 14418 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4060 - Cutting speed [mm/min]: 12 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Safety light curtain - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Fixed table - Options: Digital readout - Transport dimensions: 4900mm x 2400mm x 1750mm (l x w x h) - Transport weight [kg]: 9500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Bwedpjy D U Dfjfx Aldjn Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: new, functionality: fully functional, Year of construction: 2024, MOSER Hydraulic Guillotine Shear Model: HGL 3106 Stock machine Serial No.: 30603 Year of manufacture: 10/2024 Specifications: - Swing beam design - Upper blade: Two cutting edges - Lower blade: Four cutting edges - Suitable for single and continuous stroke operation - Motorized blade gap adjustment - Motorized backgauge, 750 mm with ball screw spindles, foldable, positionable via NC controller, CYBELEC, model: CybTouch 8 W - Fixed angle stop with scale and foldable stop cam - Worktable with support plates and support balls integrated into the table - Two front support arms - Finger guard with light barrier - Side and rear safety covers - Cutting line illumination - Technical documentation - CE compliant - Colors: * RAL 7015 – Slate grey * RAL 7035 – Light grey * RAL 3003 – Ruby red Technical Data: Sheet thickness ≤ 450 N/mm²: 6 mm Sheet thickness ≤ 700 N/mm²: 4 mm Cutting length: 3,060 mm Cutting angle: 1.6° Main motor: 11 kW Number of hold-downs: 17 pcs Strokes per minute: 20 pcs Oil tank: 160 liters Usable backgauge measuring range: 750 mm Backgauge positioning motor: 0.37 kW Bwodoxgtq Tepfx Aldon Dimensions (L x W x H): 4,000 x 2,200 x 1,700 mm Weight: 5,500 kg

Condition: used, Year of construction: 1995, sheet width 3060 mm plate thickness 6,0 mm distance between columns 3060 mm max. 730 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 11,0 kW weight of the machine ca. 5,1 t Bsdjy Ezz Hspfx Aldewn dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting gap adjustment - Cutting length adjustment - Cutting line illumination - Side gauge - 2 support brackets

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment Bedpfx Asyq Szmeldewn * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions