Used Trumpf Press Brake for sale (380)

Condition: excellent (used), Year of construction: 1999, stroke length: 3,060 mm, throat depth: 410 mm, operating speed: 11 mm/s, reverse speed: 135 mm/s, overall weight: 18,209 kg, total length: 2,310 mm, total width: 3,660 mm, total height: 3,095 mm, power: 30 kW (40.79 HP), pressing force: 230 t, clearance between the columns: 2,690 mm, table width: 200 mm, CNC Crowning Hydraulic MODUFIX Tool clamping Hydraulic lower tool clamping CNC Finger Backgauge Z1 and Z2 6 Axis backgauge X1/X2, R1/R2 and Z1/Z2 Network card BNC-with RJ-45 Connector ToPs 600 Software Set Tooling  Max. bending length: 3060mm Distance between column: 2690mm Max. pressing force: 230T Dis. Beam - Table: 535mm Beam stroke: 365mm Table Width: 200mm Troth beam: 410mm Approch speed: 200mm/min. Working speed: 11mm/min. Return speed: 135mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 9 Crowning: yes Hydraulic toolclamping: yes Power: 30kW Length: 2310mm Nodpfx Aco Aa It Ts Delh Width: 3660mm Height: 3095mm Weight: 18209kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex-works: CNC Trumpf press brake Type Trumabend V 130 Year of manufacture 1996 CNC control Delem DA 65 Bending length 3060 mm Distance between uprights 2690 mm Upright overhang 410 mm Stroke 365 mm Installation height 535 mm Rapid traverse speed 200 mm/sec Working speed 1 – 10 mm/sec Return speed 135 mm/sec Table width 120 mm Nlsdpe Aa Iq Sofx Ac Djh Angle adjustment plus/minus 10 mm Tools: one set of upper tools OW 209 with blade and one set of lower tools EV OO4/W 12, each 3000 mm Weight 12950 kg Price: EUR 10,750.00 plus VAT ex-works

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 6,560 h, machine/vehicle number: B0501A0285, stroke length: 215 mm, throat depth: 420 mm, operating speed: 220 mm/s, reverse speed: 220 mm/s, table height: 950 mm, overall weight: 4,900 kg, total length: 2,190 mm, total width: 1,740 mm, total height: 2,375 mm, input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, pressing force: 50 t, clearance between the columns: 1,040 mm, table length: 1,275 mm, table width: 100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, I am offering my well-maintained TruBend 5050 for sale. It has no defects, no quirks, and no hidden costs. You are welcome to inspect and test it at any time. I can also take care of the loading. The setup is also not complicated. The buyer is responsible for arranging the shipping. This machine is being offered for sale solely for tax-related reasons. We do not need to and, above all, do not want to sell it below its market value, as it is very reliable and we have grown attached to it. Anyone who is genuinely interested is welcome to contact me. And yes, these are the original operating hours. Nothing has been replaced, falsified, or anything of that nature. The machine has been used very little by both the previous owner and us. The last maintenance was some time ago, but everything else is in absolutely original condition. From the operating manual to the last screw. Nedpfx Acozlutaj Delh

Condition: used, Year of construction: 2001, 3 x Trumpf bending machines (hydraulic press brakes): Njdoz Tfmropfx Ac Dslh • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Condition & Maintenance: As can be seen in the attached images, all machines have been regularly maintained as part of the annual safety inspection (UVV). The last inspection for all units took place in the summer of 2026. The machines are currently still in operation and are fully functional. Inspection & Contact: An on-site inspection is possible on weekdays until 2:00 PM.

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Nlsdpfx Aez Rknpsc Deh

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 29,966 h, machine/vehicle number: B0104A0167, stroke length: 215 mm, overall weight: 11,250 kg, pressing force: 130 t, 6 controlled axes Includes new tools worth €12,000!!! Nlsdezy Ryxopfx Ac Dsh Everything is fully functional.

Condition: like new (used), Year of construction: 2022, pressing force: 100 t, A well-maintained and regularly serviced TRUMPF press brake is available. Number of strokes: approximately 860,000. Nsdpfxov E Nvaj Ac Djlh The machine is in continuous operation, so it can be inspected and tested at our facility. The stated price is the net amount.

Condition: like new (used), functionality: fully functional, Year of construction: 2001, stroke length: 365 mm, overall weight: 9,050 kg, pressing force: 85 t, clearance between the columns: 540 mm, table length: 2,100 mm, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 2axis back gauge Nsdpfezfp D Tsx Ac Dslh • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, operating hours: 29,650 h, machine/vehicle number: 885802, control type: CNC control, controller manufacturer: Delem, controller model: DA23e, bending force (max.): 130 t, working width: 3,005 mm, stroke length: 215 mm, installation height: 385 mm, oil tank capacity: 150 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 300 mm/s, back gauge travel distance R-axis: 250 mm, overall weight: 13,000 kg, total length: 3,640 mm, total width: 2,210 mm, total height: 2,375 mm, Equipment: documentation/manual, Trumpf CNC-controlled press brake, used. Type TrumaBend V 130 X, year of manufacture 1995. With hydraulic clamping but without tools. The machine is powered and can be demonstrated. Sale from current location. Nedpfx Asw Ud D Uoc Dolh

Condition: excellent (used), Year of construction: 2012, TruBend 5230 including robot, well-maintained, in excellent condition. Nodpfxez Uxk Hs Ac Dslh

Condition: good (used), Year of construction: 2011, Used Trumpf 5130, 3-meter CNC press brake Type: 5130 Nodpfx Aszd S Apec Dslh Capacity: 3100 x 130 tons Year of manufacture: 2011 Wila hydraulic upper and lower clamping system Bending aid X, R, Z1 and Z2 CNC-controlled back gauge

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, overall weight: 5,400 kg, pressing force: 66 t, table length: 2,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, This TRUMPF TruBend 3066 press brake features a pressing force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis back gauge (X/R/Z1/Z2) and operates with a rapid approach speed of 200 mm/s. If you are looking for high-quality bending capabilities, consider the TRUMPF TruBend 3066 machine. • Y-axis stroke: 200 mm • X-axis stroke: 600 mm • R-axis stroke: 150 mm Nsdpfxez Sqn Ej Ac Dslh • Back gauge axes: X / R / Z1 / Z2 (4 axes), motorized • Pressing force: 660 kN • Bending length: 2600 mm • Maximum table-to-beam distance: 347-432 mm, depending on tooling • Throat depth: Approximately 400-420 mm • Beam inclination / parallelism: ±3 mm • Rapid approach speed of the Y-axis: 200 mm/s • Working speed of the Y-axis: 15 mm/s • Retract speed of the Y-axis: up to 200 mm/s • Positioning accuracy (Y-axis): 0.01 mm • Mains supply: 400 V / 50 Hz • Connected load: 15 kVA PNEUMATIC TOOL LOCKING, WILA CLAMPING SYSTEM BEND GARD ALWAYS UNDER TRUMPF MAINTENANCE

Condition: excellent (used), Year of construction: 2014, Used modern good condition Trumpf Trubend 3100 Series 3000 3metre CNC pressbrake for sale Used Trumpf Trubend 3100 B26 for sale 3metre x 100ton 6 axis pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3100 b26 Nedpjqlapaefx Ac Djlh Type: CNC hydraulic Press Brakes New 2014 Location: United kingdom Low hours Specification: Tonnage: 100ton Type: hydraulic downstroke H frame pressbrake Overall Length 3.1 m /3metre 6axis in total with a 4xis back gauge Touch screen control Tonnage 1000Kn Stroke 200mm Brake time 60ms Springback max 10mm Safety distance 120mm

Condition: used, functionality: fully functional, Year of construction: 2014, overall weight: 22,800 kg, pressing force: 320 t, Equipment: CE marking, documentation/manual, Used, but in very good condition – TruBend 5320 press brake 6 axes: Y1 – Y2 – Z1 – Z2 – X – R Complete with: Njdpfx Acezamyce Dolh i-axis 4-axis back gauge Year of manufacture: 2014 Options / Equipment: Bending aids CNC-controlled crowning system Hydraulic upper and lower tool clamping system Right-side parking position Working length 4100 mm Max. press force 3200 kN / 320 tons Max. stroke 445 mm The machine has been serviced and maintained by TRUMPF.

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Nlodpfxozq A Ipo Ac Deh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 23,390 h, controller model: TASC 6000, overall weight: 8,600 kg, pressing force: 85 t, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Nodpfx Ajz Hxtdsc Djlh Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: excellent (used), Year of construction: 2006, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Machine type: hydraulic CNC bending press Manufacturer/Model: TRUMPF TrumaBend V1300 Year of manufacture: 2006 Operating hours: 109,800 h Approximate weight: 12,950 kg Performance data Press force: 1,300 kN Bending length: 3,230 mm Free clearance between uprights: 2,690 mm Overhang: 420 mm Stroke: max. 215 mm Optional stroke: 445 mm Table-beam distance: max. 505 mm Optional table-beam distance: 735 mm Njdpfx Asz S D Tuoc Dslh Usable installation height: 385 mm Optional installation height: 615 mm Table width: 120 mm Working height: 1,050 mm Angle of ram: ±10 mm Back gauge and tool clamping Back gauge system: 4 axes Upper tool clamping: hydraulic Crowning: CNC Machine dimensions Length: 3,640 mm Width: 2,060 mm Height: 2,285 mm EQUIPMENT 4-axis back gauge system Hydraulic upper tool clamping CNC crowning

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, overall weight: 5,400 kg, total length: 2,000 mm, Equipment: CE marking, documentation/manual, This TRUMPF TruBend 3066 press brake features a pressing force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis back gauge (X/R/Z1/Z2) and operates with a rapid traverse speed of 200 mm/s. If you are looking for high-quality bending capabilities, consider the TRUMPF TruBend 3066. Njdpfxjz Sqqte Ac Dolh • Y-axis stroke: 200 mm • X-axis stroke: 600 mm • R-axis stroke: 150 mm • Back gauge axes: X / R / Z1 / Z2 (4 axes) MOTORIZED • Pressing force: 660 kN • Bending length: 2600 mm • Usable open height: Minimum clearance 167 mm • Maximum table-to-beam distance: 347-432 mm, depending on tooling • Throat depth: Approximately 400-420 mm • Beam inclination/parallelism: ±3 mm • Y-axis rapid traverse speed: 200 mm/s • Y-axis working speed: 15 mm/s • Y-axis return speed: up to 200 mm/s • Positioning accuracy (Y-axis): 0.01 mm • Mains power supply: 400 V / 50 Hz • Connected load: 15 kVA PNEUMATIC TOOL CLAMPING, WILA TYPE BEND GARD UNDER TRUMPF MAINTENANCE

Condition: excellent (used), functionality: fully functional, control type: CNC control, controller manufacturer: Delem, bending force (max.): 170 t, number of axes: 4, type of crowning: CNC-controlled, Equipment: CE marking, foot remote control, lower tooling, safety light barrier, upper tooling, Used Trumpf Trumabend V170 CNC Hydraulic Press Brake For Sale Subcategory: Press Brakes Tonnage: 170Ton Manufacturer: Trumpf Model: V170 Trumabend Condition: Used Trumabend DA65 2D CNC Controls 4 Axis machine, complete with i axis Nledpfx Aex R Ul Aec Dsh 2 Axis CNC Back Gauges R and X Axis complete with 4 fingers on the back stop CNC Ram Control Y1, Y2 CNC Bed Crowning Die Shift (iaxis) Pedestal Controls Electric Foot Switch Safety Light Guards

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 50,000 h, Equipment: CE marking, documentation/manual, Trumpf TruBend V200 bending cell + BendMaster 60 Year of manufacture: 2004 Maximum pressing force: 2000 kN Maximum stroke: 365 mm Maximum operating pressure: 340 bar Nlsdpozrxfasfx Ac Djh 1 unit B0401A0009 = BendMaster 60 1 unit B0106A0073 = TRB V200-6A 1 unit protective enclosure including lighting 1 unit BendMaster track, 14 meters in 2-meter segments 1 unit Trumpf system control

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping Nlsdpfx Acex Ew Dqo Dsh - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: excellent (used), Year of construction: 2006, Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Response time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Weight of the press: 7,300 kg Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Nlodpsz Hl Nfsfx Ac Doh Connected power: 17.0 kVA Control voltage: 24 V= Compressed air connection: 6 bar

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Nlsdpfx Acjz Rl Nhe Doh Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, controller manufacturer: TRUMPF, controller model: TASC 6000, pressing force: 173 t, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Nlsdpfxeza U Nfj Ac Deh Technical Specification Bending Length 4250 mm

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2009, operating hours: 14,367 h, stroke length: 445 mm, throat depth: 420 mm, overall weight: 25,000 kg, total width: 5,300 mm, total height: 3,200 mm, pressing force: 320 t, clearance between the columns: 3,680 mm, table length: 4,420 mm, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices Njdpfx Acezdc A Is Djlh