Used Doosan Crawler Excavator for sale (259)

Condition: excellent (used), Year of construction: 2007, Doosan Puma 300MC C-axis with driven tools, 360° (0.001°) Gsdpfsyrb Ursx Aqgouh Year: 2007 Fanuc 21iTB with Manual Guide Chuck: 12 inch (315mm) Samchully Spindle bore: 102mm Max turning diameter: 355mm Axis travels: X - 250mm Z - 680mm Turret: BMT 65 Tailstock Tool probe Chip conveyor, coolant tank with pump Tool holders Machine documentation Condition: very good

Condition: excellent (used), machine/vehicle number: JK-00316, Year of construction: 2009, lifting height: 4,700 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery voltage: 80 V, fork length: 1,200 mm, Lifting capacity: 3.000 kg Gsdpfx Asx Itf Ajqgeuh Maximum passing height: 222 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-11-03 Please contact Johanny Hendrikse for more information

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg Guodpfxsq Nqkxe Aqgoh HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, Gedpfsx Dk Dlox Aqgouh FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant

Condition: excellent (used), Year of construction: 2015, DOOSAN G30 Generator Set – Machine after full service! Technical data: Power: 31 kVA (25 kW); Year of manufacture: 2015; The generator is fully operational, ready for work, with warranty. Net price: PLN 26,500 Gross price: PLN 32,595 Guodpeylifrofx Aqgsh Below you will find a link to a video showing the machine in operation.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 250 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, overall weight: 4,850 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis DOOSAN PUMA 2000SY was manufactured in 2006. It features a sub-spindle and a Y-axis for enhanced machining capabilities. The machine includes a bar feeder and 10 motorized driven tool holders, providing versatility for various applications. With a total operating time of 8836 hours, this horizontal turning machine represents a valuable opportunity for high-quality turning capabilities. Reach out for further details regarding this machine. • Y-Axis: Included • CNC Total Operating Hours: 8836 hours (THP LAV) • Electrical Power Supply: AC 380/400V, 3-Phase, 50/60 Hz • Nominal Capacity: 50.71 kVA / 11.0 kW • Maximum/Full Load Current: 73.20 A • Interruption Current: 9000 A Additional equipment • TOP Automazioni bar feeder • Chip conveyor • Parts catcher / conveyor output belt • Hydraulic unit • USAG tool trolley • Driven tool holders: 10 motorized modules / driven tools Technical Specification Counter Spindle Yes Gusdpfjzzn U Aex Aqgjh Driven Tools Yes

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 2,129 mm, turning diameter: 550 mm, spindle motor power: 26 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 90 mm, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 18 m/min, type of input current: three-phase, total height: 2,305 mm, total length: 5,550 mm, total width: 2,300 mm, overall weight: 9,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN 2-Axis lathe with FANUC 21i-TB CNC Gedpfx Aqox Sqwwegjuh

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Gusdpfoqzhfxox Aqgeh Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Gedpfx Aqox Sq Uvogouh Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: used, functionality: fully functional, machine/vehicle number: 0032, Year of construction: 2016, operating hours: 4,000 h, load capacity: 4,500 kg, lifting height: 4,700 mm, free lift: 1,825 mm, fuel type: diesel, mast type: triplex, construction height: 2,325 mm, drive type: Diesel, Diesel forklift Chassis number: 0032 Mast type: Triplex Gearbox: Automatic Technical condition: very good Gusdpfx Asy Up Itoqgeh Side shift, 3rd valve, 4th valve,

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, 102mm bar capacity, Gjdpfx Aqjzhwghjgeuh 2800rpm 22kW Spindle, Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock,

Year of construction: 2006, condition: ready for operation (used), A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible. Guodpfx Aqjyvuvxjgjh

Condition: used, machine/vehicle number: 26412, Year of construction: 2016, operating hours: 9,925 h, load capacity: 5,000 kg, lifting height: 4,690 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,317 mm, Equipment: cabin, .: 26412 Equipment details: Year of manufacture: 2016 Load capacity: 5,000 kg Lifting height: 4,690 mm Read operating hours: 9,925 h Free lift: 1,410 mm Mast type: Triplex Mast height: 2,317 mm Length/Width/Height: 3,300 / 1,460 / 2,185 mm Operating weight: 7,550 kg ---- Gujdpfx Aqoyg Df Ajgjh Features: * Overhead guard * 3rd valve * 4th valve * Full cab * Heater * Front working lights * Rear working lights ---- Further equipment information: ---- Operating hours are generally read off the display. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are also happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For dealers, the equipment is sold as-is, not refurbished. All information subject to change and errors excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, New price: 11,900 EUR / Previous price: 14,900 EUR Lithium-ion battery. Forklift in perfect condition. We sell forklifts after comprehensive servicing. Prepared for end users. We can arrange transport within Europe and worldwide. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp на французском языке ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. Our qualified specialists have over 20 years of experience in the forklift and construction machinery sector. We employ the best mechanics in the forklift industry in Poland and have many satisfied customers across Europe. We also manufacture EPAL EUR pallets, renowned for excellent quality and timely delivery. Guodpfx Aqey Hvtmegsh Each machine is thoroughly tested and undergoes a full service inspection before delivery. All necessary repairs are completed. The customer receives a forklift ready for immediate use. In Poland, at the customer's request, we can arrange official acceptance of the machine by the State Office of Technical Inspection (UDT). Our main goal is to satisfy our customers and solve their logistical challenges. We know how to prepare machines so our clients are fully satisfied and recommend us to others. Please feel free to contact us and take advantage of our services. Need a forklift supplier? Contact us.

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication Gsdpfxszvq Dps Aqgsuh --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: excellent (used), DOOSAN VC 630/5AX YEAR 2015 CNC HEIDENHAIN 530 AXIS TRAVEL: -X: 650 mm -Y: 765 mm -Z: 520 mm -A: 150 (+30 -120º) – (0.001º) -C: 360º (0.001º) TABLE: -5 Continuous axes Gjdpfx Aqozc Hm Uegouh -⌀ 630 mm -Distance from spindle to table: 210-730 mm -Max. permissible weight: 500 kg RAPID TRAVERSE: -X: 40 m/min -Y: 40 m/min -Z: 36 m/min -A: 20º/min -C: 30º/min BALL SCREWS: ⌀ 45 X 16 (X, Y), ⌀ 45 X 12 (Z) mm ELECTRIC SPINDLE HEAD ISO 40 DIN69871 (*Brand new) -Motor power (continuous - 30 min): 24/32 Kw -RPM: 20,000 INCLUDED OPTIONS: -Optical scales on all axes -120-tool changer -Automatic pallet changer with 5 pallets -Renishaw measuring probe -Laser pre-measuring device -Chip extractor CONDITION: Machine in excellent condition. Headstock is completely new. Available for inspection in operation.

Condition: used, Year of construction: 2016, Due to the large number of non-serious emails / emails will not be answered. Gsdpfx Aqszyw Ipegjuh WhatsApp "Errors, typos, and prior sale excepted."

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, lifting height: 6,050 mm, free lift: 1,930 mm, fuel type: electric, mast type: triplex, power: 22 kW (29.91 HP), fork length: 1,800 mm, Weights Empty weight: 8.700 kg Functional Lifting capacity: 5.000 kg Maximum passing height: 275 cm Number of valves: 3 Supply voltage: 80 V Dimensions of cargo space: 309 x 147 x 275 cm CE mark: yes Guodpjy S Uw Usfx Aqgoh Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Front tyre size: non-marking Rear tyre size: non-marking Fork carriage: Sideshifter Additional information Please contact Stephan Honinx, Dietmar Pack or Simon Pack for more information = Additional options and accessories = - 3rd valve - 4th valve - Battery charger - Free lift - Super elastic tyres

Condition: ready for operation (used), Year of construction: 2021, load capacity: 10 kg, arm reach: 1,300 mm, number of axes: 6, This 6-axis DOOSAN M1013 collaborative robot was manufactured in 2021. It features a payload capacity of 10 kg and a reach of 1,300 mm, making it suitable for various applications. The machine includes a stable construction with an aluminum plate and a rotary table for enhanced functionality. If you are looking to get high-quality automation capabilities, consider the DOOSAN M1013 collaborative robot we have for sale. Contact us for further details. Gedpfx Aqjy D S S Tegeuh • Total dimensions: 1,790 x 1,100 x 900 mm • Documentation: Complete documentation, risk assessment, and CE conformity declaration included Additional equipment • Machine table: Stable construction with 20 mm aluminum plate (840 x 700 mm) • Additional pallet: 400 x 700 mm support surface • Storage system: Rotary table with automatically rotatable hole-pattern plate (28 mm pitch) • Gripper: Pneumatic double-parallel gripper with quick-change jaws • Insertion aid: Spring-loaded compensating adapter (21 N) for raw part placement • Controller housing: EPS-Case IP54 for robot controller, pneumatic valves, and I/O modules • Construction: Open Item profiles with external T-slots for modular expansion • Electrical/pneumatic: 24-pin Harting plug set, pneumatic connection, ready to plug in • Included accessories: 100 cylinder pins (12 x 120 mm), 5 sets of gripper finger blanks, blow-out nozzle, hose guide, tablet holder, splash guard

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm Gedpfx Aqeycvpfegouh ISO40 (BT) taper -X850mm -Y700mm -Z750mm 1-degree pallet indexing 60 tools Chip conveyor Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: used, functionality: fully functional, machine/vehicle number: 0025, Year of construction: 2023, operating hours: 200 h, load capacity: 6,000 kg, lifting height: 4,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,540 mm, drive type: Diesel, Diesel forklift truck Chassis number: 0025 Mast type: Triplex Condition: Like new Gusdjy Up Rzjpfx Aqgoh Technical condition: Very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windscreen, heater, load guard, soot filter, full cabin, air conditioning, twin tires, safety light, interior mirror, exterior mirror, beacon, wiper, LED,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 210 h, load capacity: 16,000 kg, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, empty load weight: 26,850 kg, total length: 5,600 mm, construction width: 2,540 mm, Diesel forklift Load center: 1200 Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Very good, like-new condition. The unit will receive a new inspection and a new certification according to UVV (German regulations for occupational safety and health). Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, heater, air conditioning, full free lift, Guedpfx Ajzf Sfysqgeh

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Godpfx Aszg Eb Dsqgjuh Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, 6-axis CNC lathe with sub-spindle, driven tools and Y axis Godpfjtvl U Hsx Aqgsuh

Condition: excellent (used), power: 35 kW (47.59 HP), fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 Compressor – 3000 RPM – 8.6 bar – 35.5 kW – Weight 750 kg – 687 operating hours – with new hoses and hammers = Further information = Year of manufacture: 2022 Intended use: Construction Guedjx Scplepfx Aqgsh Serial number: TK4755FX6NY445791 Manufacturer: Doosan Bobcat Emea CZ Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.