Used Doosan Crawler Excavator for sale (326)

Condition: used, Year of construction: 2016, operating hours: 5,605 h, load capacity: 2,500 kg, lifting height: 4,750 mm, fuel type: gas, construction height: 2,150 mm, gearing type: automatic, Equipment: head guard, MAKE: DOOSAN TYPE: G25E-5 YEAR: 2016 CE: YES WORKING HOURS: 5605 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 49KW ENGINE: HYUNDAI LPG WEIGHT: 4122 KG OPTIONS: CAPACITY 2500KG LIFTING HEIGHT 4.75M Gtodpfxox Itlce Aa Ist OVERALL HEIGHT 2.15M FORK LENGTH 1.20M TRIPLE MAST FREE LIFT SIDESHIFT FORK POSITIONER

Condition: used, Year of construction: 2017, operating hours: 14,421 h, Type of fuel: Diesel Empty weight: 12.860 kg Dimensions (LxBxH): 405 x 223 x 395 cm Lifting capacity: 9.000 kg Lift height: 510 cm Fork dimensions: 2.440 x 2.200 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FDB0X-2520-00135 - Operating hours: 14421 - Lifting capacity: 9000kg - Lifting height: 5100mm - Overhead clearance: 3920mm - Free lift: 0mm - Fork length: 2440mm - Maximum fork width: 2200mm - Minimum fork width: 570mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights, Heating, Full cabin, Radio, Camera - Mast: Duplex - Drive: Diesel - Motor brand: Doosan - Transport dimensions: 4050mm x 2230mm x 3950mm (l x w x h) - Transport weight [kg]: 12860kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Godjx Iqcxjpfx Aa Istt Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2014, 780mm Swing, 630mm Swing over the Cross-Slide, Gtsdox Eluwopfx Aa Iet 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: good (used), Year of construction: 2022, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller model: Fanuc, Catalog No. : 7960 Type: DNM 4500 Producer: DOOSAN Made in: 2022 Characteristic: Control system: Fanuc Hours on: 2471 h Length of the working table: 1000 mm Width of the working table: 450 mm X-Axis travels: 800 mm Y-Axis travels: 450 mm Z-Axis travels: 510 mm Gjdpfouxcd Uox Aa Iott Machine weight: 5000 kg

Condition: used, Year of construction: 2019, control Fanuc F0-iTF + MG i turning diameter 370 mm turning length 712 mm greates pass round over bed 651 mm swing diameter over slide rest 461 mm x-axis 255 mm z-axis 790 mm turning speeds 5.000 U/min Number of tools 12 St. spindle hours ca. 8.953 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Driven tools - Chip conveyor - Parts catcher - Coolant pump, 7 bar, 25 L/min - Automatic tool measuring arm Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Gedpsx Ik Ubsfx Aa Ijtt Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 5,580 h, Year of manufacture: 2014 Gedpfexqfcisx Aa Iett Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; rigid tapping; Gtedpfxsx Ncpgs Aa Ijt rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray;

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Gtjdpfx Aox Ad Nloa Iet Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light Gjdpjx Elr Aefx Aa Iett

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included Gsdpfxjxxdmij Aa Iett MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: used, Year of construction: 2016, control Fanuc i-Serie turning diameter 370 mm turning length 712 mm greates pass round over bed 651 mm swing diameter over slide rest 461 mm x-axis 255 mm z-axis 790 mm turning speeds 5.000 U/min Number of tools 12 St. auto power on hours ca. 13.086 spindle hours ca. 4.221 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Coolant pump, 7 bar, 25 L/min Gsdpfex Ik T Rex Aa Iett - Oil separator - Pneumatic parts catcher with collection box - Automatic tool measuring arm - Automatic cutting force monitoring Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), Year of construction: 2014, DOOSAN LYNX 220 LATHE YEAR 2014 TECHNICAL DETAILS Working area Maximum turning diameter: 320 mm Gtjdpow Ht I Ijfx Aa Ijt Maximum spindle travel: 510 mm Maximum turned length: 305 mm Bar passage: 51 mm Motor power: 11 kW Control: Fanuc i-Series Number of tool positions: 12 MACHINE DETAILS Machine weight: 3,500 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC i Series, table width: 430 mm, table length: 920 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine Godpfjx Nbtdjx Aa Istt

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand FANUC Gtedpfx Ajx Rd Hvsa Ist Main Drive Number of axis 6 Spindle Speed 3600 RPM Spindle motor power 22 kW Movement X-Axis Movement 250 mm Y-Axis Movement 50 mm This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Gtedpfx Aasx Dk Dlj Iot Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant

Condition: used, Year of construction: 2008, functionality: fully functional, turning length: 230 mm, turning diameter: 410 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 230 mm, Doosan PUMA H-310/TM CNC horizontal lathe, year 2008, equipped with FANUC Series 18i-TB control, ideal for precision machining of medium-sized workpieces with dual turret machining capability. Main technical specifications: Maximum turning diameter: Ø 410 mm Maximum turning length: 230 mm Recommended turning diameter: Ø 255 mm Maximum distance between spindle centers: 500 mm Axis travels: X: 210 mm Z: 230 mm Rapid traverse X/Z: 24,000 mm/min Main spindle: Chuck: Ø 250 mm Spindle nose: ASA A2-8 Speed: 3,500 rpm Power: 15/18.5 kW Gsdewt S Ugepfx Aa Istt Turret system: Number of turrets: 2 Stations per turret: 12 Driven tools: Speed: 3,000 rpm Power: 4 kW Tool dimensions: 25x25 mm (turning) / Ø 40 mm (boring) Included accessories: Chip conveyor Coolant tank with washing pump External high-pressure pump Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Compact, versatile, and high-performance machine, perfect for multitasking machining in high-efficiency production environments.

Condition: used, Year of construction: 2007, control Fanuc 21i-TB turning speeds 4.500 U/min x-axis 205 mm z-axis 580 mm greates pass round over bed 550 mm swing diameter over support 300 mm number of tool places 12 Pos. bar passage 65 mm auto power on hours ca. 56.433 h spindle hours ca. 23.981 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Driven tools Gsdpfx Aex Ik T Doa Iett - Scrap catcher - Tool measuring device - Spindle monitoring Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2007, DOOSAN LYNX 220 LATHE Gedpfxjw Al Uxe Aa Ijtt CNC FANUC Series Oi-TC Machine compliant with “CE” standards Max. swing over bed: 510 mm Max. swing over carriage: 290 mm Max. turning diameter: 320 mm Max. turning length: 305 mm Max. bar capacity: 52 mm Spindle nose: ASA 6” Spindle: max. rotation speed 50/5000 rpm Spindle motor power 11/15 kW Turret: 12 stations Tool dimensions (turning/boring) 25×25 / diameter 40 mm Machine weight: 2,900 kg Supplied with chip conveyor, tool presetting device, and a set of tooling.

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Godjx Hy R Njpfx Aa Istt Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, Control Unit Brand FANUC Model iSeries Table Table load 400 kg Gtodpjx E Egaefx Aa Iet Main Drive Number of axis 4 Spindle Speed 10000 RPM Tool taper BT 40 Movement X-Axis Movement 800 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2017, operating hours: 7,830 h, Year of manufacture: 2017 Gtjdsx Hgtwjpfx Aa Iot

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Gtsdpfexxlmwex Aa Ijt Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: used, Year of construction: 2011, x-travel 600 mm y-travel 560 mm z-travel 565 mm Control Fanuc Series 32-i MODEL A spindle tunring speed 8.000 U/min tool taper BT 40 spindle hours ca. 11.298 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Commissioning: 2016 Technical Features & Accessories: - Interchangeable plates/table Gtedpfxox Ik S Hs Aa Iot Accessories, tools, and clamping devices shown are only included if noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,640 h, Year of manufacture: 2015 Empty weight: 14.400 kg Gsdpfx Ajx Hgqisa Iett Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2014, control Fanuc i-Serie turning diameter 320 mm turning length 305 mm greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 330 mm turning speeds 6.000 U/min spindle bore 53,3 mm Number of tools 12 St. auto power on hours ca. 39.183 h spindle hours ca. 8.379 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gedox Ik Syspfx Aa Istt Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!