Used Doosan Crawler Excavator for sale (310)

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Redpfx Aeyfxv Tefcjp 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof = Further information = Lifting capacity: 3,000 kg Rjdpfxjyfvtio Afcep Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 2,125 mm, turning diameter over cross slide: 580 mm, turning diameter: 420 mm, spindle motor power: 25 W, spindle bore: 102 mm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 2,190 mm, mount diameter: 315 mm, For sale: DOOSAN PUMA 3100XLY turning center from 2013. Technical data: Rodpoyhv N Nofx Afcep Max turning diameter: 420mm Max turning length: 2125mm Axis travels X/Y/Z: 293 / 130 / 2190mm Chuck size: 315mm (12'') Spindle bore: 102mm Max spindle speed: 2800rpm Spindle type: Electro-spindle Number of turret stations: 12 Max driven tool speed: 5000rpm Head type: BMT65 Machine weight: approx. 11,000kg Machine equipped with SMW SLU3 self-centering steady rest - 45-165mm Control system: Fanuc with Manual Guide Machine in continuous operation. Inspection and testing possible. Both static and driven tool holders included.

Condition: excellent (used), Year of construction: 2020, Swing over bed 720mm, Swing over cross-slide 590mm, maximum machining diameter 481mm, maximum machining length 1275mm, bar capacity 102 mm, 12 station turret, spindle speed 2,800 rpm, Fanuc I series control, tool setter, swarf conveyor, 3 jaw chuck, Rjdex Uy Haepfx Afcep

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Rjdpfx Afjuu Rf Djcop Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - RENISHAW TS27 tool presetter - RENISHAW OMP60 zero point setting system - Manuals The machine is still in production but will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, Rjdpfjx T Dhlsx Afcop 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total height: 22,500 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Rsdpfx Afevhpr Hjcsp Subject to alterations, prior sale and errors excepted. - .

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 830 mm, total height: 2,200 mm, overall weight: 6,450 kg, controller manufacturer: FANUC, controller model: na, number of axes: 5, This 5-axis DOOSAN 2600 SY turn-mill centre was manufactured in 2015. It features a Fanuc CNC, a maximum turning diameter of 375 mm, and lengths up to 760 mm. The machine includes a motorized turret with 24 positions and motorized tools capable of 5,000 rpm. Ideal for complex machining tasks. Consider the opportunity to buy this DOOSAN 2600 SY turn-mill centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total installed power: 54 kw • Workpiece max turning diameter: 375 mm • Workpiece max turning length: 760 mm • Workpiece max turning diameter from bar: 81 mm • Power of motorized tools: 5. 5 kw • Speed of motorized tools: 5000 rpm Extra Information Tools 1 self-centering chuck, diameter 250 mm 2 axial live tool holders 2 radial live tool holders Redpsyc Iiwofx Afcsp 5 boring bar holders 5 external turning tool holders Dimensions Machine Depth 3600 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Rsdpfxoyftfij Afcop Control system: SIEMENS Sinmerik 828D Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – 2019 – Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LM CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: SIEMENS Sinumerik 828D Powerful spindle and driven tools for high productivity Redpsyftatjfx Afcop Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2019 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,570 h, Year of manufacture: 2015 Rjdex Hgn Uepfx Afcop Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: used, Year of construction: 2020, CNC lathe 3-axis Doosan LYNX 300M C-axis with driven tools Year of manufacture: 2020, Korea New Fanuc control (touch screen) Maximum turning diameter: 370 mm Maximum turning length: 712 mm Travel distances: Z – 790 mm X – 255 mm Chuck – 250 mm Spindle bore – 76 mm Max spindle speed – 3,500 rpm Turret for 12 tools BMT 55 Tailstock Renishaw probe Parts catcher -LNS chip conveyor -Tool holders in total: 10 pcs -4 pcs -4 pcs -2 pcs 1/1 driven -Machine documentation Operating hours: 1,441 Rjdpfeygwvnjx Afcep

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 47 kW (63.90 HP), empty load weight: 4,850 kg, drive type: Treibgas, LPG forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Like new Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Sideshift, Rjdjx Aw S Tspfx Afcep 3rd valve, 4th valve, Half-cab,

Condition: excellent (used), Year of construction: 2022, operating hours: 6,600 h, functionality: fully functional, machine/vehicle number: ML0118-000493, turning diameter over cross slide: 670 mm, turning length: 1,285 mm, turning diameter: 420 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,315 mm, total length: 4,530 mm, total width: 2,249 mm, quill travel distance: 100 mm, quill diameter: 100 mm, quill stroke: 1,350 mm, swing diameter over cross slide: 670 mm, turning diameter over bed slide: 720 mm, workpiece weight (max.): 1,000 kg, torque: 1,240 Nm, overall weight: 8,000 kg, bar passage: 102 mm, spindle nose: A2-11, Equipment: documentation/manual, rotational speed infinitely variable, CNC turning machine with driven tools and Y-axis, programmable tailstock (servo-driven), driven tool turret with BMT 65P interface, programmable steady rest holder with steady rest SLUB 3.1, automatic tool measurement arm, coolant gun, SMW power chuck 325 mm and SMW power chuck 400 mm, chip conveyor, Liqui band filter system, various tool holders including driven holders, filter for coolant extraction, programming system for external computer. Rjdjydcd Sopfx Afcjp

Condition: good (used), Year of construction: 2017, operating hours: 10,963 h, functionality: fully functional, machine/vehicle number: ML0335-000100, turning diameter over cross slide: 400 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 12,600 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,693 mm, total length: 2,570 mm, total width: 1,595 mm, workpiece weight (max.): 300 kg, overall weight: 3,400 kg, bar passage: 67 mm, Equipment: documentation/manual, rotational speed infinitely variable, very stable roller-guided 2-axis CNC lathe with tailstock, suitable for both series production and single-part machining; Siemens 828 D control; interface for bar machining, parts catcher and ejector for automated processing; tailstock; chip conveyor; various tool holders; tool measuring arm. Redpfsydbqqox Afcjp

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: MV0098-000226, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 56 m/min, nominal power (apparent): 16 kVA, controller manufacturer: FANUC, workpiece weight (max.): 200 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 200 h, number of slots in tool magazine: 21, tool diameter: 200 mm, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in perfect condition, with only 200 spindle hours since new. It never had a collision. It is possible to inspect the machine under power and verify its geometry. Free packaging and loading on truck. Rjdpfx Afjxpuwmscop Included in the package: 3D probing system Tool measurement probe (the stylus is damaged — we can replace it) Through-spindle coolant (TSC) Chip conveyor 21-tool magazine

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm Redpfxjya Ih Ie Afcjp x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Manual tailstock - Tool setter arm - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm -Y700mm -Z750mm Rodpfx Aoycvpfsfcop 1-degree pallet indexing 60 tools Chip conveyor Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Rsdpfx Afeiy Nppjcop Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 7,058 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: telescopic, construction height: 2,180 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Rsdpfxoyadd Ss Afcep Transmission: Torque converter Condition: Operational and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 7.00-12 Rear tires type: Superelastic Rear tires size: 6.00-9 Description: In addition to this device, we offer more forklifts and warehouse equipment. All our machines are workshop-inspected and comply with FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Leasing and financing at attractive conditions are available on request. We will gladly provide you with professional and comprehensive advice about our vehicles. Sideshift, 3rd valve, rear work light, front work light, internal mirror, beacon light, single pedal, seat,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 319 h, load capacity: 3,500 kg, lifting height: 4,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,800 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Operational and fully functional Technical condition: Standard Front tires type: Superelastic Front tires size: 23x10-12 Rear tires type: Superelastic Rear tires size: 18x7-8 Battery voltage: 80V Battery capacity: 775Ah Rjdpfx Aoyadd Ejfcjp Battery manufacturer: Exide Battery type: PzS Battery year: 2019 Description: In addition to this unit, we offer further forklifts and warehouse equipment. All our machines are fully workshop-inspected and certified according to FEM 4.004. Please contact us via email or phone. You can also find us at hsr-gabelstapler. Of course, we are also interested in purchasing your used equipment, even if you do not buy a vehicle from us. Hire purchase and financing at favorable terms are available upon request. We are happy to offer you professional and comprehensive advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, load guard, safety light, interior mirror, revolving beacon, single-pedal control, LED, seat,

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm Rjdpfjuxua Isx Afcsp - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: excellent (used), Year of construction: 2014, DOOSAN PUMA 2600LMB (2014) Rodpfx Aeyb Sryefcop CNC LATHE WITH LIVE TOOLS AND “C” AXIS Z-1,350 CNC FANUC i Series 10.4” Color LCD EZ-Guide - Swing over bed: 780 mm - Swing over carriage: 630 mm - Max. turning diameter: 376 mm - Max. turning length: 1,245 mm - Travel: X 260 mm Z 1,350 mm - Chuck diameter: 380 mm - Bar capacity: 102 mm - Spindle nose: ASA-A2-11 - Headstock: 2,800 rpm, 22 kW - Driven turret: 12 stations BMT 65P* (Indexing 1 station 0.25 sec) - Live tools: 5.5 kW, 5,000 rpm - C axis indexing: 0.001 mm - Tailstock quill diameter/travel: 100 mm/100 mm EQUIPMENT INCLUDED: - Samchully HCH-15” 3-jaw hydraulic chuck, 380 mm diameter - C-axis 360° (0.001°) - Automatic tool presetter - Integrated tailstock - High-pressure pump - Chip conveyor - Preparation, base, and logic for steady rest - SMW AUTOBLOK SLU-3.1 hydraulic steady rest (20-165 mm) - Set of tool holders - Set of DOOSAN and FANUC manuals CONDITION: Machine in good condition. Can be seen in operation. Immediate delivery.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DOOSAN PUMA 400LMA FANUC 32i (Year 2011) MAIN SPECIFICATIONS: -CNC FANUC 32i with 10.4” color LCD and Manual Guide -Swing over Bed: 770mm -Swing over Saddle: 590mm -Max. Turning Diameter: 560mm -Max. Turning Length: 2,064mm -X/Z Travels: 357mm / 2,155mm -Bar Capacity: 90mm -Hydraulic Chuck diameter: 400mm -Spindle: 22kW / 3,000 rpm (ASA A2-8) -BMT 75P 12-station turret with live tooling -Live Tools: 7.5 kW 3,000 rpm INCLUDED EQUIPMENT: -S-HS-12 hydraulic chuck, 305 mm diameter with set of jaws -C Axis 360° (0.001°) -Automatic tool setter -Programmable tailstock -High pressure pump 14.6 bar Redoyb Sqpspfx Afcep -Chip conveyor -Hydraulic steady rest preparation (base, controls, hydraulics) -SMW SLU X-4-ZS hydraulic steady rest, diameter 30-245mm -Full tool holder set with 4 internal, 4 external, and 4 rotary (2 angular, 2 straight)* -Set of manuals and documentation CONDITION: Machine in EXCELLENT condition, under power in Barcelona, available for inspection.

Condition: used, machine/vehicle number: FBA17-1390-00445, Year of construction: 2018, operating hours: 2,790 h, lifting height: 4,730 mm, free lift: 1,600 mm, fuel type: electric, battery manufacturer: Midac, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, Empty weight: 4.790 kg Rodpfx Afjuballecsp Battery: 620 Ah, 80 V, Year of manufacture 2018, Brand of battery Midac Lifting capacity: 2.500 kg Maximum passing height: 220 cm Please contact Johanny Hendrikse for more information