Used Haas Cnc Lathe for sale (245)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, Control Unit Brand HAAS Model n/a General Data Measurements width 2718 mm Measurements height 1473 mm Measurements depth 2357 mm Main Drive Number of axis 3 Table Number of tslots 3 Table load 1350 kg Tools Type of tool holder ISO 40 Fodox D Eg Uopfx Ag Esgk Additional Equipment Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Media Internal cooling yes This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2019, operating hours: 4,101 h, functionality: fully functional, machine/vehicle number: 1159962, Equipment: chip conveyor, HAAS VF 5 SS VERTICAL MACHINING CENTRE YEAR 2019 SPINDLE SPRRED 12,000 RPM TRAVELS - X AXIS - 1270 MM Y AXIS - 660 MM Z AXIS - 635 MM TABLE SIZE 1321 X 584 MM Fedew N Nw Aopfx Ag Ejgk THROUGH SPINDLE COOLANT HIGH SPEED MACHINING 40 TAPER RIGIT TAP 30 ATC 4TH AXIS ENABLED SWARF AUGER HOURS IS ON THE PHOTOS

Condition: excellent (used), Year of construction: 2018, For sale Fourth axle from Haas HRT310 with 15 operating hours Year of construction 2018 Clamping surface diameter 310 mm Max. Weight on the clamping surface (with support) 197.3 kg Maximum weight on the clamping surface (unsupported) 98.7 kg Number of T-slots in basic configuration 6 x 60° Max. Max. speed 75 °/sec Torque (continuous) 407 Nm Weight 232 kg The dividing head can be inspected by arrangement in Upper Austria. Fgjdpfju Haxlox Ag Esk The buyer takes care of transportation. Technical data, accessories and description of the machine are non-binding

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1056789, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 18 m/min, workpiece weight (max.): 1,500 kg, total height: 3,600 mm, total length: 2,400 mm, total width: 2,600 mm, table width: 457 mm, table length: 1,219 mm, table load: 1,500 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, type of input current: three-phase, coolant supply through spindle: 20 bar, tool type: SK 40, Equipment: chip conveyor, documentation/manual, lighting, This CNC machine is a Haas VF3(BHE) from 2007. It features a side-mount tool changer and a double-arm gripper, enabling automatic tool changes from 24+1 tools. Both the tool changer and spindle accept SK40 tool holders. A wired handwheel is located on the left side of the control panel. The 4th axis is pre-configured. The front and side safety viewing windows have been replaced. The coolant has been drained, and the tank has been cleaned. An additional 25-micron coolant filter protects the spindle's internal coolant system via the tool against contaminants and chips. Training materials and a manual are included, as well as a cable for communication with a computer (see photos). The machine is powered on and can be inspected and demonstrated by appointment at any time. We are happy to answer any further questions you may have about the CNC machine. Organizing transport at the buyer’s expense is possible by arrangement. Sale on behalf of a customer! Fodpfx Agex Aidhe Esgk

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 2400 min-¹ Spindle motor power 30 kW Additional Equipment Functions: Synchronized tapping, LCC-4 slat-band chip conveyor, HPC High pressure coolant supply (21 bar), ATP Automatic tool presetting, EXpack, EU-trafo Fodpfx Ajx D Ixyog Esgk This HAAS ST-40 was manufactured in 2018. A robust horizontal turning machine featuring a 102 mm bar diameter, 2400 min-¹ speed, and a powerful 30 kW motor. It includes a 12-station BOT turret, high-pressure coolant system, and a programmable hydraulic tailstock. Ideal for high precision turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, Main Drive Spindle Speed 4000 RPM Number of axis 3 Movement Fjdpfx Agex E Eags Eogk X-Axis Movement 762 mm Z-Axis Movement 406 mm Y-Axis Movement 305 mm This 3-axis HAAS TM1 was manufactured in 2005. It features a vertical machining center with a spindle speed of 4000 rpm and travel dimensions of X 762 mm, Y 305 mm, and Z 406 mm. If you are looking to get high-quality milling capabilities, consider the HAAS TM1 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 2223 kg Main Drive Number of axis 2 Spindle Speed 1800 RPM Fjdpfx Asx E D U Njg Ejgk Spindle motor power 7.5 kW Movement X-Axis Movement 203 mm Z-Axis Movement 762 mm This HAAS TL1 was manufactured in 2020. A robust horizontal turning machine featuring a swing diameter over front apron of 508 mm and a maximum cutting length of 762 mm. It supports a spindle speed up to 1800 rpm with a maximum torque of 146 Nm at 355 rpm. Ideal for detailed turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, Control Unit Fgsdpfx Ajx D I Stjg Eok Brand HAAS Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1016 mm X-Axis Rapid Traverse 30.5 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 30.5 m/min Z-Axis Movement 635 mm Z-Axis Rapid Traverse 30.5 m/min Table Table load 794 kg This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1016 mm X-Axis Rapid Traverse 30.5 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 30.5 m/min Z-Axis Movement 635 mm Z-Axis Rapid Traverse 30.5 m/min Fgodpsx D I Smsfx Ag Ejk Table Table load 794 kg This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. Application Types Milling

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 2000 mm Fgodpsx D S Hbefx Ag Esk Measurements depth 3300 mm Measurements height 2000 mm Control Unit Brand HAAS Main Drive Spindle speed range 3400 Spindle bore 76 mm Number of axis 2 Movement X-Axis Movement 287 mm Z-Axis Movement 864 mm Turret Number of turrets 1 Tools Number of station 12 Media Chip conveyor Yes This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Application Types Turning

Year of construction: 2010, condition: ready for operation (used), Main Drive Fsdpox D Hm Nefx Ag Ejgk Number of axis 2 Workpiece Workpiece drm over bed 806 mm Workpiece drm over support 527 mm Media Chip conveyor Yes This HAAS ST-30 was manufactured in 2010. A robust horizontal turning machine featuring a swing over bed of 806 mm, maximum cutting diameter of 533 mm, and a bar capacity of 76 mm. It includes a 254 mm 3-jaw chuck, tailstock, coolant system, and chip conveyor. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand HAAS Main Drive Spindle speed range 15000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 508 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 5-axis HAAS DM-1 vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a spindle drive of 11.2 kW, and a tool magazine with 18+1 tools. The rapid traverse rate is 61 m/min, enhancing productivity. If you are looking to get high-quality milling capabilities, consider the HAAS DM-1 machine we have for sale. Contact us for more information. Application Types Fodpox D I Diefx Ag Esgk Milling

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 4944 kg Control Unit Brand HAAS Main Drive Fgsdpfx Aex D El Reg Esk Spindle speed range 3400 rpm Spindle motor power 22.4 kW Number of axis 2 Movement X-Axis Movement 239 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 826 mm Z-Axis Rapid Traverse 24 m/min This HAAS ST-30 was manufactured in 2020. A robust horizontal turning machine featuring a chuck size of 254 mm, max cutting diameter of 381 mm, and bar capacity of 76 mm. It supports a spindle speed up to 3400 rpm with a power of 22.4 kW. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,452 h, Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1270 mm Y-Axis Movement 508 mm Fgsdsx D Embopfx Ag Eek Z-Axis Movement 635 mm This 4-axis HAAS VF-4 vertical machining center was manufactured in 2017. It features a spindle speed of 12.000 RPM, a 22.4 kW spindle motor, and a table size of 1321mm x 495mm. It includes a 20-position tool changer, through-spindle coolant at 21 bar, WIPS-R probes, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2008, condition: ready for operation (used), General Data Measurements depth 3900 mm Measurements width 2000 mm Measurements height 1900 mm Control Unit Brand HAAS Main Drive Spindle speed range 3400 Spindle bore 103 mm Number of axis 2 Workpiece Workpiece drm over bed 762 mm Additional Equipment 2-step gearbox 3 jaw chuck + collet chuck Barfeed magazine Samsys Fsdpfx Agox D S E Re Esgk This HAAS SL-30TBHE was manufactured in 2008. A robust horizontal turning machine featuring a spindle speed of 3400 1/MIN, 22 kW motor power, and a swing over bed of 762 mm. It includes a 12-position turret, hydraulic tailstock, and both 3 jaw and collet chucks. Dimensions are 3900x2000x1900 mm. Consider the opportunity to buy this HAAS SL-30TBHE horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Number of axis 2 Movement X-Axis Movement 215 mm Fodpfx Agox D Stue Esgk Z-Axis Movement 508 mm Tools Number of station 10 Additional Equipment 15 kW main engine Chuck diameter: 210 mm This HAAS SL-20HE was manufactured in 2004. It features X-AXIS movement of 215 mm, Z-AXIS movement of 508 mm, and a chuck diameter of 210 mm. With a 15 kW main engine and 10 turret stations, this horizontal turning machine is ideal for precision tasks. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2021, Main Drive Spindle speed range 4000 Spindle motor power 5.6 kW Tool taper BT 40 Fodpfx Agox D N Rwe Esgk Control Unit Brand HAAS Movement X-Axis Movement 1016 mm Y-Axis Movement 406 mm Z-Axis Movement 406 mm Table Tslots size 3 Table load 159 kg This HAAS TM 2 Vertical Machining center was manufactured in the year 2021. It is equipped with a HAAS control unit. The machine has a spindle speed of 4000 rpm. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 19,843 h, Control Unit Brand HAAS Main Drive Number of spindles 1 Spindle speed range 10000 rpm Spindle motor power 224 kW Tool taper CT40 Number of axis 3 Movement X-Axis Movement 2134 mm X-Axis Rapid Traverse 152 m/min Fsdpfsx D R Tmox Ag Eogk Y-Axis Movement 1016 mm Y-Axis Rapid Traverse 152 m/min Z-Axis Movement 762 mm Z-Axis Rapid Traverse 152 m/min Additional Equipment Ethernet Media Display Synchronized Thread Cutting without Head for Compensation Cooling: ✓ Renishaw Tool Calibration Screw Chip Conveyor TAB-Air Cooling Through Tool HSM-High-Speed Machining Automatic Air Gun Directed at Tool Programmable Coolant Nozzle: Automatically directs spray Coolant Tool This 3-axis HAAS Vf-9/40 vertical machining center was manufactured in 2017. It offers robust capabilities for precision machining. Consider the opportunity to buy this HAAS Vf-9/40 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 10000 Tool taper CT/BT40 Number of axis 3 Fgedpox D Ifgefx Ag Eok Movement X-Axis Movement 406 mm Y-Axis Movement 300 mm Z-Axis Movement 250 mm Table Table load 227 kg This 3-axis HAAS MiniMill HE was manufactured in 2007. It features a spindle speed of 10,000 rpm, a CT/BT40 taper, and a side-mount tool changer with 30+1 positions. The table measures 914 × 305 mm and supports a maximum load of approximately 227 kg. If you are looking to get high-quality milling capabilities, consider the HAAS MiniMill HE machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Fsdpfex D Irmox Ag Eogk Y-Axis Movement 508 mm This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, Main Drive Fgsdpex D I H Rjfx Ag Eok Number of axis 5 Table Table load 227 kg This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, Main Drive Number of axis 3 Spindle Speed 7500 RPM Fsdpjx D H Rujfx Ag Eegk Spindle motor power 15 kW Tool taper BT 40 Movement X-Axis Movement 1626 mm Z-Axis Movement 762 mm Y-Axis Movement 1016 mm This 3-axis HAAS VF-8 vertical machining center was manufactured in 2003. It features a 1626 x 1016 x 762 mm travel range, a 15.4 kW spindle power, and a maximum spindle speed of 7500 rpm. Equipped with a BT-40 tool holder, a 24+1 position tool changer, and a screw-type chip conveyor. If you are looking to get high-quality milling capabilities consider the HAAS VF-8 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, Main Drive Number of axis 3 Spindle Speed 2000 RPM Spindle motor power 22.4 kW Movement Fsdpex D H Ndjfx Ag Eegk X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Table Table load 794 kg This 4-axis HAAS VF-4SS vertical machining center was manufactured in 2019. It features a 1270 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. With a maximum spindle speed of 12,000 rpm and spindle power of 22.4 kW, it ensures robust performance. Maximum table load capacity is 794 kg. If you are looking to get high-quality milling capabilities consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2003, condition: ready for operation (used), General Data Machine weight 7200 kg Measurements height 1900 mm Measurements depth 1800 mm Dimensions Machine Length 3800 mm Main Drive Number of axis 2 Spindle Speed 3200 RPM Spindle motor power 224 kW Fedpfsx D Irgsx Ag Esgk Movement X-Axis Movement 318 mm Z-Axis Movement 660 mm This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HAAS Model na Main Drive Tool taper BT40 Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Fodpfx Agox D Sw He Eogk This 4-axis HAAS VF-4SS was manufactured in 2018, featuring a working area of 1250 × 508 × 635 mm and a spindle speed of 12,000 rpm. It includes a 24 + 1 tool magazine and a BT40 taper. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Application Types Milling