Used Haas Machining Center for sale (244)

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 863 mm turning speeds 3400 U/min control Haas CNC Control spindle bore 88 mm greates pass round over bed 762 mm swing diameter over bed slide 432 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm drive capacity - spindle motor 22 kW weight of the machine ca. 7,25 t dimensions of the machine ca. 3,9 x 2,0 x 1,9 m Equipment/accessories: - Tool turret: 12 positions - Tool holder: VDI 40 - 3-jaw chuck: 250 mm - Tailstock mount ISO: Ø 290 - Bar passage: 76 mm Hjdpfjyk H I Ujx Afcji - Technical documentation

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. • Chuck size: 10 in (≈254 mm) • Maximum bar capacity (through spindle): 3 in (≈76 mm) • Maximum part swing over front apron: 31.75 in (≈806 mm) • Maximum cutting diameter: 13.75 in (≈349 mm) using BMT65 turret • Maximum cutting length: 32.5 in (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 in (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-centre milling, drilling, and tapping • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195–260 V (region dependent) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment Hedpfx Asx D Iixefcei • Powered (live) tool holders • Various tool holders • Liners

Condition: used, Year of construction: 2013, HAAS - OM-2A - 2013 - working hours less than 1400 Hodjyl Iz Sepfx Afcji - very good condition - 5 axis - X/Y/Z=305/254/305 mm - table 508x254 mm - max table load 68 kg - spindle RPM 30000 - spindle motor 3,7 kW - spindle taper ISO 20 - ATC 20 - weight 680 kg - including 20 tool holders

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 Hjdpfx Ajyid Hvjfcji • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Haas SL-20THE with live tooling Machine is inspected Year of manufacture: 2005 Swing diameter over bed: 762 mm Turning specifications: - Turning length: 508.0 mm - Turning diameter: 261.6 mm - Diameter over bed: 584.2 mm - Diameter over cross slide: 241.3 mm - Distance between centers: 609.6 mm Axis travel: Hsdpfsx Rpazex Afcji - X-axis travel: 214.6 mm - Z-axis travel: 508.0 mm Spindle details: - Spindle bore: 76.2 mm - Spindle speed: 4000 RPM - Spindle motor power: 14.9 kW Tooling: - Number of turrets: 1 - Number of tools on turret: 10 - Number of live tools: 10 Measuring arm Chip conveyor 3-jaw power chuck Dimensions: - Length: 3149.6 mm - Width: 1574.8 mm - Height: 1828.8 mm - Weight: 4083.5 kg The machine can be inspected by appointment in Hanover. Buyer responsible for transport. Technical specifications, accessories, and description of the machine are non-binding.

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. In 2021, a driven tool error occurred and the angular drive was replaced. After relocation, a geometric recalibration was carried out in 2022. Currently, there is an issue with internal bore accuracy: the machined inner hole appears slightly stepped. It may require main spindle centerline adjustment; however, a more significant spindle alignment issue cannot be fully excluded. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle Hjdpfxeyh Hw Io Afcsi

Year of construction: 2007, condition: ready for operation (used), Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg. Spindle speed: 6000rpm, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2700mm, weight: approx. 1550kg. Including an additional control panel on request (not included in the price). Documentation available. On-site inspection is possible. Hjdpou T Rg Defx Afcsi

Year of construction: 1995, condition: excellent (used), Very well maintained pre-cutting circular saw for side goods. With hydraulic power unit and accumulator, double clamping hydr. Attachment kit with measuring roller for riving knife. Electric control cabinet with control. Control panel with digital dimension input and operation. Photos show original condition. Hjdpsh Eyqvofx Afcsi

Year of construction: 2007, condition: ready for operation (used), Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. Hodpfeq N A I Rox Afcei

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 Hodpfx Afsyhfltscoi • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,588 kg, overall weight: 6,623 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3s HAAS VF-5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details. • Table size: 1321 x 584 mm • Drive system: Inline direct-drive • Tool changer capacity: 20/24+1 stations • Rapid traverse (X/Y/Z): 18 m/min • Max cutting feed: 12.7 m/min Hedoyhcktopfx Afcei Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, controller manufacturer: HAAS, number of axes: 2, Horizontal turning machine manufactured in 2001. This HAAS SL-30THE was designed for precision with a spindle speed of 3,000 RPM and a claw chuck diameter of 254 mm. With an X-axis travel of 287 mm and a Z-axis travel of 864 mm, it offers reliable performance for turning applications. Consider the opportunity to buy this HAAS SL-30THE horizontal turning machine. Contact us for further details. Hsdpfeyhb Rrsx Afcoi • Claw chuck diameter: 254 mm • The machine runs, but the Vector drive malfunctions when slowing down the engine Vector drive is less than a year and a half old, and repair is likely an option.

Condition: excellent (used), Year of construction: 2007, HAAS SL - 20 LATHE YEAR OF FIRST INSTALLATION: 2007 TURNING LENGTH: 508 mm TURNING DIAMETER: 262 mm TRAVELS: X: 203 mm Z: 508 mm BAR CAPACITY: 51 mm 1 TURRET: 10 POSITIONS SPINDLE SPEED: 4,000 RPM Hjdeyh Nhiopfx Afcsi CHIP CONVEYOR

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,717 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 2,565 mm, table load: 300 kg, overall weight: 8,200 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2020, featuring a 762 mm X-axis, 508 mm Y-axis, and 508 mm Z-axis. It includes a spindle speed up to 12,000 rpm, ISO 40 taper, and a robust 40-position tool changer. The machine supports a maximum table load of 300 kg and offers advanced features like a wireless probing system, chip conveyor, and through-spindle coolant. Consider the opportunity to buy this HAAS UMC-750 universal machining centre. Contact us for more information. Additional equipment • Wireless Intuitive Probing System • Through-Spindle Coolant Machine Benefits Technical Machine Benefits • B-axis travel: 120° to -35° Hsdpjx Hbmrsfx Afcsi • C-axis travel: 360° • Spindle nose to table (max/min): 610/102 mm • Table diameter: 500 mm • Tool changer capacity: 40 positions Extra Information Machine still under power Dimensions Machine Depth 3978 mm

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Hodpfoxrf Stjx Afcsi Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 2,667 mm, table load: 1,361 kg, overall weight: 3,300 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, This 3-axis HAAS VF-1 vertical machining centre was manufactured in 2013. It features a HAAS control, a spindle power of 22.4 kW, and a spindle speed of 8100 RPM. The machine includes a carousel-type tool magazine with 20 positions and a coolant capacity of 208 liters. If you are looking to get high-quality milling capabilities, consider the HAAS VF-1 machine we have for sale. Contact us for more information. Hedeygld Hspfx Afcji • Table: Length 660 mm; Width 356 mm • Tool magazine: Carousel, 20 positions • Coolant capacity: 208 l Dimensions Machine Depth 2489 mm

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper DIN 68971A Spindle speed 12.000 1/min Hjdpfoydn E Iox Afcji Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, We are offering for sale a HAAS SL-10 CNC lathe. This is a compact and robust 2-axis turning center, ideal for machining small to medium-diameter parts. This model is perfectly suited for automation via a bar feeder. General description: Hedpeydpw Eefx Afcoi - Brand / Model: Haas SL-10 CNC Lathe - Type: 2-axis CNC turning center - Control: Haas CNC - Design: Slant-bed construction for increased rigidity and optimal chip evacuation. Technical specifications: - Maximum turning diameter: approx. 279 mm - Maximum turning length: approx. 356 mm - Bar capacity: approx. 44 mm - Chuck: 6.5″ or 5C collets - Spindle speed: up to 6,000 rpm - Spindle power: 11 – 15 HP (8 – 11 kW) - Turret: 10 to 12 stations (depending on version) - Axes: X and Z Feel free to contact me for any further information or to arrange an inspection.

Condition: used, Year of construction: 2011, operating hours: 4,598 h, functionality: fully functional, machine/vehicle number: 3087698, turning length: 806 mm, turning diameter over cross slide: 584 mm, turning diameter: 457 mm, spindle motor power: 22,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 318 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 584 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 4,500 rpm, type of input current: three-phase, Many tools included : Automatic cutting fluid filtration system chip conveyor belt Hodpsycwbpofx Afcsi coin return system high-pressure sprinkler system

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Tool setter swarf conveyor Tailstock Parts catcher Hjdpfx Afox U D Etocoi Tooling as show. ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Tool changer: 50+1 tool changer • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets Hsdpfx Asx Hblujfcji • 21 bar trough spindle • 15" screen Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, table load: 340 kg, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 1997. It features a table surface of 900x350 mm, a table capacity of 340 kg, and movements of X 750 mm, Y 410 mm, and Z 500 mm. The spindle operates at 8000 rpm with a power of 7.5 kW. Regular maintenance and recent updates ensure reliability. Consider the opportunity to buy this HAAS MIKRON VCE 750 vertical machining centre. Contact us for more information about this machine. • Table surface: 900 x 350 mm • Condition: regularly maintained; still in operation • 2023 service: new tool change hand gearbox and new tool change magazine Hedjx D Egzjpfx Afcoi Additional equipment • 4th axis

Year of construction: 2004, condition: excellent (used), Drive power: 250 kW Rotor length: 1600 mm Rotor diameter: 1200 mm Infeed opening: 1500 x 750 mm / 1500 x 600 mm Wear parts new, main motor newly mounted. Subframe, hydraulic unit, Including control cabinet and operator panel, Excellent condition, ready for operation Hjdpouqyr Eefx Afcei Total weight approx. 18 t

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Hodpfx Afswvf Thscoi Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Hodpfx Ajwvgbyjfcei Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.