Used Hofmann Balancing Machine for sale (44)

Condition: used, Year of construction: 1974, Used machine Year of manufacture: 1974 Equipment and technical data: Spindle diameter: 30 mm 6 spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm The machine does not have a motor brake and can therefore only be sold as a source of spare parts! Kdodjw I Uriepfx Afdsk Availability: Short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Planing width: 510 mm Kdodpowx Niljfx Afdjk Motor power: 4.0 kW Motorized table adjustment Fine adjustment via handwheel 2 rubber feed rollers

Condition: ready for operation (used), Year of construction: 1983, Hofmann AHW 600 L Surface Planer Planing width: 600 mm Cutter block with 2 strip knives Table length: 3000 mm Heavy cast iron construction Motor power: 5.5 HP Kdedpfx Afox S Na Rodsk Weight: 1050 kg Cutter block speed: 5000 rpm

Condition: ready for operation (used), Hofmann AB 9000 Electromagnetic ring balancing system SN:11160318 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Kjdpfjr Nrbtex Afdodk

Condition: reconditioned (used), functionality: fully functional, Planing width 510 mm, planing height 200 mm, manual height adjustment, star-delta switch, feed controlled by 2-speed foot pedal, main switch, emergency stop. Kdedpfxjx E Smms Afdjk

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, TERSA cutterhead with 4 knives, 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit. Thickness table adjustment with buttons for rapid or slow feed, as well as fine adjustment accurate to 1/10 mm. Integrated operating hours counter. Thickness table mounted on 4 support spindles and 4-way guided. Two feed speeds: 7 and 14 m/min. One rubber feed-in and one rubber feed-out roller. Two extraction ports Ø 160 mm. Slide for top extraction. Planer guard system SUVAMATIC. Motor power 7.5 kW. Positioning control including sensor monitoring. Kdsdjx Ey Tzepfx Afdek

Condition: as good as new (ex-display), functionality: fully functional, 7.5 kW Motor, 400 V, 50 Hz Heavily ribbed cast iron table with table rings Electronic soft start and braking device Electric height and tilt adjustment with rapid and slow-motion modes, precise to 1/10, height adjustment approx. 145 mm, tilt adjustment +/- 45.5° Kjdsx Ey S Ropfx Afdedk 4 spindle speeds: 3,000/4,500/6,000/9,000 rpm Spindle fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut Left-/right rotation, machine socket outlet, arc milling guard type TAPOA, Hofmann "Centrex" Paintwork: grey white/signal blue Table size 2000 x 815 mm Extendable support Heavy-duty milling fence type 2620 Total adjustment via handwheel with indicator included Switchable to tool zero position. Digital display for individual jaw adjustment. Includes quick clamping system for the fence jaws Cast iron fence jaws Safety rulers and moulding board Interchangeable spindle MK5 Power feed unit, 4 rollers, 8 speeds with stand Control panel on top Tool compartment

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Kdjdpfx Afswvq Tajdjk Diameter: 220mm indexing: 360.000° Centre height:220mm Control system:Siemens 840D Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Year of construction: 2004, condition: excellent (used), HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture 2004 S/N 127-01323 manufacturer: Hofmann Bad Windsheim Kdsdpfx Ajm Tg Ecofdek from a training company very good condition manual height and swivel adjustment for fine tuning analog display for height adjustment, height adjustment 125mm table size 1200 x 820mm and table extension 200 x 820mm swivel range -5° to + 45 spindle speed 3000/4000/5000/6000/8000/10000 rpm. milling spindle D=30mm milling arbor MK5 motor 4,7 Kw / 6,3 PS Suction nozzle D=120 mm Lateral roller table with eccentric hold-down and adjustable angle stop Height adjustable with hand wheel CE mark Weight 1300 Kg

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, Power rating 380V Kdedpfsv Up R Asx Afdjk Planer block motor 4kW 8.3A Feed motor 1x0.37kW 1x0.55kW 2x feed speeds 7 + 14 m/min Star-delta switch Planing thickness adjustable with hand crank Planing width 510 mm Leitz reversible cutter block with 2 knives 2 table rollers Extraction connection 140 mm

Condition: reconditioned (used), Year of construction: 1974, machine/vehicle number: 13-78-13, functionality: fully functional, Connected load 3kW planing width 410 mm Kdodpeh U A Rajfx Afdok 2-blade shaft with strip planing blades connection suction 140 mm pick-up table length 1430 mm pick-up table length 1070 mm

Condition: excellent (used), Year of construction: 2024, Pallet flow rack / flow rack for special load carriers 1.40m x 1.20m, max. 700kg, space for 300 load carriers - used -: Price ex-site: €59,500 (net), including disassembly, etc.! Supplier: Hofmann Fördertechnik GmbH Roller conveyor supplier: Fluxus Solutions GmbH Year of construction: June 2024 Compartment width: FW I: 1,398 mm (bay with one roller conveyor) – 1 bay available Compartment width FW II: 2,798 mm (bay with two roller conveyors) – 2 bays available Kdjdpfxev Uzgie Afdjk Buckling length: K I: 292 mm Buckling length K II: 1,300 mm Roller pitch: 156 mm Clamping length (EL): 1,250 mm Pallet type: Steel pallet Porsche, finished goods according to DIN 15155/8 Dimensions: (W x L x H): 1,200 x 1,400 x 930 mm, lengthwise Storage capacity: at least 200 pallets Pallet weight: max. 700 kg Frame height: approx. 7.99 m Rack height Including load carriers: approx. 8.32 m Depth of rack/channels: approx. 15 m Rack width: approx. 7.34 m Compartment heights: approx. 1.30 m Roller conveyor designed for a special load carrier Dimensions of the laid-out load carrier: 1400 x 1200 mm Weight of the full load carrier: ~660 kg Weight of the empty load carrier: ~220 kg Both full and empty load carriers pass through the rack Other load carriers of different dimensions also pass through the rack Separation at the end of the channel for zero-pressure removal Additional separations within the channel to reduce back pressure Capacity: 300 load carriers 10 load carriers per channel 5 channels per level 6 levels Condition: good - very good Available: immediately Location: 74912 Kirchardt

Condition: used, empty load weight: 4,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2016, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 49 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 5,300 mm, color: red, Equipment: ABS, Disc brake EBS Payload 13,700 kg Lifting and lowering device BPW axles Roof with Etscha Kdedpfx Afsrx Tgvedek Errors excepted

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, type of input current: AC, spindle diameter: 30 mm, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, table width: 800 mm, table length: 2,000 mm, total length: 2,000 mm, total width: 1,200 mm, total height: 860 mm, overall weight: 920 kg, workpiece weight (max.): 1,060 kg, clamping height: 125 mm, height adjustment type: electric, opening width: 370 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1,500 rpm, table height: 860 mm, Machine no: 128-29225 Type: TFS 2000 Built in 1999. Engine: 7.5 Kw Kjdpfx Afjvn Rb Asdedk Suva matic

Condition: ready for operation (used), functionality: fully functional, empty load weight: 120 kg, color: white, Year of construction: 2004, Marking machine: + Hofmann + H5-1 + Year of manufacture 2004 + 120 kg + Honda GX160 engine 5.5 HP + From municipal stock Kodpfx Ajwift Iefdsdk Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis Kdjdpoxal A Uofx Afdek + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, Year of construction: 1993, Spindle tiltable: No Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Tilt angle display: - Fence position display: Scale Cutter spindle diameter: 30 mm Speeds: 3000, 4000, 5000, 6000, 8000, 10000 Kedpjwv Ncgefx Afdjdk Motor power: 5 / 6.2 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2600 mm Machine depth: 900 mm Weight: 700 kg

Condition: good (used), Year of construction: 1996, 2 pieces Ksdsrtngcepfx Afdjdk Fab. Hofmann Year of construction 1996 Bale size (channel size)= 80 x 60 cm Bale weight e.g. hay = 220 kg/bale with 1.4 m bale length Hydr. baling pressure = 300 bar Automatic bale tying with 3 wires Ø 3.1 mm Baling capacity approx. 5 t/h Motor power = 18 kW incl. collecting screw under baler incl. electrical control with Wago PLC (year of manufacture 2022) undismantled

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), height adjustment type: electric, Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Kdjdpfeu Nz Ndox Afdok Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German