Used Holzkraft Asa 21 for sale (166)

Condition: new, NEWPrecision band saws for theambitious craftsmenA particularly quiet and precise run thanks to onetorsion-free machine housing and onesolid base made of sheet steelGray cast iron saw table with precisely groundand polished surfaceComfortable laser device for cutting linemarkSaw band quick clamping via eccentric leveron the back of the machineStandard with two speedsPrecise 3-roller saw band guides,standard top and bottom from HBS 351Fast cutting height adjustment viaKnob and rack with millimeter scaleSmooth-running aluminum rip fence withEccentric quick release and magnifying glassStandard miter stop,adjustable on both sides by 60 °Safety switch for automaticShutdown when the door is openedEquipment detailsPrecision guidanceHBS 351 with 3-roller saw band guide at the topand belowWith leadership rolesEasily adjustablePractically maintenance-freeQuick release systemEccentric quick release leverThe basic voltage setting is therebynot h integrated saw band tension indicatorFlywheelsFlywheels with a special coating (HBS 351)The basic voltage setting is made via themade at the top of the rotary tableThe gray cast iron saw table is on a Wipp holder saw table inclination can be from -10 ° to + 45 °can be set play of the blade tensionSaw band tension display fordifferent saw band widthsReadable from the outside by a in the doorintegrated viewing windowPrecision guidanceFrom HBS 431 with precision saw band guidewith leadership rolesFine and fine adjustment above and belowTwo speeds via V-beltselectable adjustmentBalanced cast iron flywheelsgrant a quiet runAluminum rip fenceWith quick-action eccentric clamp, particularly easy and precise to moveEasy to read millimeter scale and integratedMagnifying glassSaw table double rocker bracketThe table inclination from -10 ° to + 45 ° takes place overprecise and smooth rack and pinion guidancewith pommelFor safety reasons, from 20 °a holding device / a stop may be attached,to prevent the wood from slipping!Technical specifications:Dimensions and weightsLength (product) approx. 820 mm Height (product) approx. 1852 mmWidth / depth (product) approx. 730 mmWeight (net) approx. 130 kgSuction connectionExtraction nozzle diameter 2 x 120 mmWork table (s)Working table length 610 mmWorktable inclination -10 - 45 °Working table width 431 mmExplanation of worktable inclinationFor safety reasons, a holding device / a stop must be attached from 20 ° to prevent the wood from slipping!Working table height 950 mmElectrical dataConnection voltage 230 VMains frequency 50 HzPhase (s) 1phOutput power 1.5 kWCurrent type ACCutting areasCutting height max. 90 ° 270 mmCutting width max. without stop 410 mmCutting width max. with 370 mm stopSaw bandSaw band speed (s) 900/450 m / min3-roller saw band guidePrecision guidance above and belowSaw band length 3345 mmscope of deliveryAngle stop ± 60 °Laser device for cutting line marking1 x saw band wood 3345 x 6 x 0.65 mm Iodpfxevwgbde Acpebc

Condition: new, Holzkraft HSE 5-520 KH log splitter for the convenient and safe splitting of short logs for domestic or semi-professional use. Its compact design and ease of use enable efficient work even in confined spaces. Ideal for preparing firewood. Iedpfx Acjzrx E Hspobc Technical data: - Splitting force: 5 tonnes - Length of material to be split: max. 520 mm - Diameter of material to be split: max. 250 mm - Drive: Electric, 230 V - Weight: approx. 50 kg

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Optimal price-performance ratio. Additional ESE equipment: Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Drawer-type grinding attachment. Integrated work table lighting. Equipment details: Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Ibjdpeff Hdfofx Acpsc Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Ibjdpfx Acsr A Eq Rspoc Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, Year of construction: 2025, Roll diameter: 533 mm Outrigger overhang: 510 mm Ijdpfx Acjh Ekx Sspjbc Cutting depth: 350 mm Table can be swiveled: yes, -0 to +45° Table size: 750 x 530 mm Belt speed: 1400 m/min Motor power: 4.1 kW / 400 V Motor brake: yes / automatic Dust extraction connection: 2 x 120 mm Machine length: 998 mm Machine width: 530 mm Machine height: 1987 mm Weight: 273 kg

Condition: new, - NEW -Description:- Robust welded steel construction- Workpiece is automatically fixed with each cut by saw blade cover- The saw blade is moved upwards via a pneumatic cylinder and dips back into the machine body after each cut- Saw blade feed infinitely variable via adjusting screw on the front of the machine- Effective chip and intrusion protection made of Plexiglas- High operating safety due to two-hand control- Standard with 1m roller conveyor to the left and right of the machine, and material stop with scale- Saw blade change via large side doorTechnical data:General informationSaw blade speed(s) 3000min¯¹Saw blade diameter 500mmSaw blade bore 30mmSaw blade thickness 4mmMitre angle noSuction nozzle diameter 125mmSound pressure level89dB(A)Dimensions and weightsLength (product) approx. 3000mmWidth/depth (product) approx. 1600mmHeight (product) approx. 1500mmWeight (net) approx. 700kgElectrical dataPower drive motor 6kWMotor speed 2900min¯¹Total power consumption 15.5ASupply voltage 400VMains frequency 50 - 60HzStandards and approvalsEMC class APneumatic connectionAir consumption approx. 33l/minPneumatic working pressure 6 - 8barCutting areasCutting capacity 0° (square) solid material 160 x 160mmCutting capacity 0° (rectangular) solid material 400 x 100mmScope of delivery:- 1 m infeed roller conveyor, to the right of the machine- 1 m outfeed roller conveyor including manual material stop with scale, to the left of the .: 5651500 Iedpfevwfluox Acpebc

Year of construction: 2023, condition: new, Rollers: 3 Roller width: 60 mm Roller diameter: 120 mm Suspension travel: 20 mm Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min Stand overhang: 1050 Ibedpfelikf Sjx Acpoc Motor power: 0.75 kW

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Ibodpfxsu R S Ero Acpjc Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Ibedpfx Acovwf Ucspsc

Condition: new, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Extension table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Sanding unit swivels: yes Dust extraction port: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 810 mm Ibjdsgr Ufhopfx Acpoc Weight: 290 kg

Condition: new, - New -Description:TERSA quick-change system for changing planer knives in secondsFour-blade shaft for best planing resultsSmooth running thanks to precision unit and heavy cast iron designLong planing tables for precise planingRobust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flatLarge, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°With auxiliary fence as standardPowerful 5.0 kW industrial motorSturdy cast steel constructionSlot drilling device can be retrofittedLength (product) approx. 2250 mmWidth/depth (product) approx. 1370mmWeight (net) approx. 465kgJointerTotal length of the tables 2250mmMax. chip removal 8mmDressing fence length 1200mmDressing fence height 160mmSuction connectionSuction nozzle diameter 120mmInstallation informationSpace requirement length 2250mmSpace requirement width/depth 1440mmExplanation of space requirementWorking area length 1000mmWorking area width/depth 3500mmChip removal max. thickness 8mmElectrical dataPower drive motor 5kWSupply voltage 400VMains frequency 50HzItem no. 5503521 Iodpovwf Hrefx Acpjbc

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Ijdpfx Acjvwd U Ijpebc

Year of construction: 2026, condition: as good as new (ex-display), Professional-grade woodworking vises Precise and meticulous workmanship Made entirely of dampened, solid beech wood All important edges are rounded Surfaces are treated with environmentally friendly oil Standard equipment includes a tool drawer The two cylinder rods of the clamping jaws are precisely and securely guided within a cast part Equipped with a smooth-running trapezoidal thread spindle With a French front clamp and a German rear clamp with linear guide, two short round bar hooks, two long round bar hooks, a drawer, and an accessory drawer Finger zinc coating on the rear clamp and accessory drawer back Length of working surface without clamps: 1915 mm Width/depth of working surface without clamps: 615 mm Working height: 870 mm Length of front clamp: 520 mm Length of rear clamp: 450 mm Width of front clamp: 70 mm Width of rear clamp: 140 mm Clamping range of front clamp: 190 mm Clamping range of rear clamp: 180 mm Clamping range of front clamp to the center of the round hook: 225 mm Clamping range of rear clamp to the center of the round hook: 265 mm Plate thickness: 50 mm Length (product): 2120 mm Width/depth (product): 790 mm Iedpfx Acec Uydaopjbc Height (product): 870 mm Weight (net): 91 kg Location: In stock at warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Cutting length: 4100 mm Cutting height: 2200 mm Cutting depth: 60 mm Ibjdpfxshpma Nj Acpec Scoring saw: yes Feed: manual Display for horizontal cut: digital Display for vertical cut: digital Saw blade diameter: 300 mm Adjustable material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 5300 mm Machine depth: 1800 mm Machine height: 3100 mm Weight: 800 kg

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Ibedpfx Aocnxa Necpoc Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Ibsdpfehpmawjx Acpec Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: new, Year of construction: 2025, Working width: 410 mm Planer head: Tersa knives Ibjdpfx Acjhpl Spopec Number of knives: 4 Jointer table length: 2000 mm Adjustable angle of the fence: yes, 45° to 90° Maximum feed thickness (thickness planer): 230 mm Height adjustment of thickness table: handwheel Display of planing thickness: mechanical counter Feed rate: 6 / 12 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: yes Table rollers: no Motor power: 5 kW Motor brake: yes, automatic Dust extraction connection: 120mm Machine length: 2000 mm Machine width: 750 mm Weight: 430 kg

Condition: new, - New -with swiveling sanding unit andoscillating sanding belt F version forVeneer grindingDescription:- The grinding unit can be swiveled up to 45 ° using a lever- The machine stand made of welded steelguarantees high torsional rigidity andvibration-free work.- Oscillating sanding belt with separateGear motor for better grinding results- Oscillation can optionally be switched on- Sanding sole with graphite coating for a higherService life of the sanding belt- Height-adjustable sanding table for usethe entire width of the sanding belt- Height-adjustable additional table with suctionfor grinding radii- The spring-loaded belt tension is the sameTape length differences independently.- With double suction- Extendable roller table extension- With rubberized sanding roller- Veneer edge grinding device with contact shoewith fine adjustment, relief rollersand fence rulers- With grooved infeed ruler for veneer protrusions- Quick changeover of veneer edgespossible on solid wood sandingTechnical specifications:Dimensions and weightsLength approx. 1900 mmWidth / depth approx. 900 mmHeight approx. 1350 mmWeight approx. 290 kgConnection suctionExtraction nozzle diameter 140/100 mmDrive powerOscillation motor 0.25 kWWork table (s)Working table length 960 mmWorking table width 350 mmWork table height adjustment 230 mmHeight adjustment longitudinal table 230 mmCross table height min. 720 mmElectrical dataConnection voltage 400 VMains frequency 50 HzGrinding unitSanding belt length 3000 mmSanding belt width 200 mmBelt speed (s) 20 m / sSanding surface length 1050 mmSanding surface width 200 mmOscillation stroke 20 mmItem No. 5363001 Ijdpfxovwgbwe Acpobc

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Isdpfx Acsvyuqfopebc

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Ibedpfx Aovyup Uecpoc

Condition: new, Year of construction: 2026, Rapid belt tensioning via lever Upper belt support with graphite coating 250 mm diameter weighted belt pulleys ensure optimal drive. With electric height adjustment With dust extraction and noise reduction features With noise reduction certificate Iodeff Hdbepfx Acpobc With two speeds Adapts to surfaces through a pivoting sanding shoe For processing beveled surfaces Standard with right and left rotation The rapid belt tensioning enables quick and easy changing of the sanding belts. Delivered partially assembled Dimensions and weights Length approx. 4540 mm Width/Depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Dust extraction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm Working width max. on table 900 mm Electrical data Power of height adjustment motor 0.37 kW Power of dust extraction motor 0.75 kW Power of drive motor 3.3 / 4.5 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s Sanding shoe length 360 mm Sanding shoe width 150 mm Workpiece Height max. 590 mm Height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table: Processing of the workpiece with an overhang to the right over the work table is possible.

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Ibjdpfx Acjvwga Hjpec

Condition: new, - new -manufactured by Holzkrafttype HBS 633 S SETDescription:- Heavy profile design with high dead weightFor maximum running- Quiet and precise running thanks to torsion-freeMachine housing- Large-scale gray cast saw tableOne piece, tiltable from 0 ° to + 45 ° withPolished and polished surface- Large cast parallel connection- Quick and precise cutting height adjustmentHand wheel and rack with millimeter scale- Standard with angle stop- Precision 3-roll saw blade guide with guide rollersTop and bottom, with fine adjustment- Eccentric quick-release lever. The basic voltage settingIs not altered, with integrated blade-voltage indication- The saw table is mounted on a double tilt support,Easy and fast fixation of the setTilt angle over fast tension- Eccentric quick-release lever- The basic voltage setting is not changed- With integrated saw band tension indicator- The massive saw blade made of gray cast iron is light and comfortableVia a handwheel rack and pinion guide- The inclination is infinitely adjustable from 0 ° to 45 °- Easy and fast fixing of the adjusted tilt anglequick releaseTechnical specifications:Working table dimensions 830 x 600 mmCutting speeds 1615 m / minFlywheel Ø 630 mmMax. Cutting height 400 mmMax. Cutting width with stop 570 mmMax. Cutting width without stop 610 mmBand saw blade length 4600 mmPrecision guide up / downSawing table inclination 0 to +45 °Motor power 400 V / 50 Hz / P2 3.75 kWWeight 380 kgDimensions 1190 x 750 x 2060 mmSuction nozzle diameter 2 x 100 mmItem No. 5156303SETlocated in 97447 Gerolzhofen- free on truck - Ibodpsvwf Tljfx Acpsc

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Ibsdpfxjvwgaas Acpec

Condition: new, Year of construction: 2026, Compact circular saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence. The cutting plane of the compact circular saw is directly on the roller table. Precision-guided aluminum crosscut fence, anodized as standard. Large table extension guided on a telescoping arm and adjustable in length. The standard table extension and table widening allow for easy work with larger workpieces. The large saw unit made of cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, making it extremely robust and durable. Smooth operation and precise cuts. Aluminum crosscut fence. Equipped with a tried-and-tested ball contact system. Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence. Extendable aluminum telescopic fence. Angle adjustable. With two professional folding fences. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Fence length: 1660 mm Ibedpfecnxamox Acpsc Cutting height max. 90° with scoring blade: 100 mm Cutting height max. 45° with scoring blade: 79 mm Cutting width max. to the left of the saw blade: 1270 mm Cutting width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scoring blade: 315 mm Saw blade diameter max. without scoring blade: 315 mm Scoring saw blade diameter (optional): 80 mm Main saw blade speed: 4000 min-1 Scoring saw blade speed: 7600 min-1 Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Dust extraction port diameter: 120 mm Dust extraction port diameter on the saw blade guard: 60 mm Weight: 295 kg Location: In stock at 54634 Bitburg - available immediately -