Used Holzkraft Minimax Sc 4E 23 for sale (216)

Condition: new, Year of construction: 2024, New machine Fedpfxjwb Eh Ne Ah Ijpr Year of manufacture 2024

Condition: new, Holzkraft minimax si 400es 32 sliding table saw 5504754 In heavy-duty professional design with scoring unit and format sliding carriage made of anodized aluminum. Fsdpfx Aekkrm Rsh Ijpr Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guide tracks Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment option UP version: swivelling control panel at eye level Made in Italy TECHNICAL DATA: Dimensions and weights Weight (net) approx. 715kg Suction connection Suction port diameter 120mm Suction port diameter saw blade guard 80mm Installation information Transport width990mm Machine body length 1900mm Machine body width/depth 885mm Required space length 7180mm Space requirement width/depth 4860mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given to the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power scoring motor 0,55kW Power drive motor 7,0kW Rated operating mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table Length of sliding table 3200mm Format sliding carriage width 360mm Format sliding carriage height 142mm Table length 940mm Table width 560mm table height 900mm Circular saw unit Cutting width with rip fence 1270mm Max. Trimming width left of saw blade 3260mm Trimming length 3200mm Saw blade inclination 90 - 45 Max. Cutting height 90°136,5mm Max. cutting height Cutting height 45°97mm Explanation max. cutting height Independent of scoring saw blade diameter 400mm Explanation Diameter of saw blade Independent of scoring unit Speed of saw blade 4000min¯¹ Scoring unit Diameter of scoring saw blade 120mm Speed of scoring saw blade 9200min¯¹ Holzkraft dealer - accessories available on request!

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Fpodpfxevyup Us Ah Isr

Condition: new, Holzkraft minimax fs 41e TERSA jointer thickness planer 5503451. Planer-thicknesser in professional design. - TERSA planer blade system enables particularly quiet running. - Diagonally toothed steel feed roller for constant and even material feed. - Material feed with two speeds Fpjdpfxskyt Iqs Ah Ior - Numerical display for thicknessing table height - The 2,000 mm long dressing tables allow easy dressing of large workpieces. - Working tables are made of cast iron, annealed and stress relieved, thus insensitive and durably flat - Stable large aluminum dressing fence with round rod guide (1200 x 160 mm) - Thicknessing table adjustment by handwheel with numerical display for planing height - The high machine weight ensures highest precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction - Made in Italy TECHNICAL DATA Dimensions and weights Length (product): ca.2000mm Width/Depth (product): ca.1110mm Weight (net): ca.430kg Dresser Total length of the tables: 2000mm feeding table length: 1034mm working height: 900mm chip removal max. dressing: 5mm dressing fence length: 1200mm dressing fence height: 160mm Suction connection Suction port diameter thickness: 2 x 120mm Installation information Required space length: 2000mm Space requirement width/depth: 1670mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 925mm Machine body width/depth: 645mm Working area length: 1000mm Working range width/depth: 3500mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length: 775mm Thickness table width: 423mm Working height thickness min.: 3mm working height thickness max: 230mm Chip removal max. thickness: 5mm Electrical data Power drive motor: 5kW supply voltage: 400V Mains frequency: 50Hz Planing cutterhead Type of cutterblock: TERSA planing shaft diameter: 87mm Number of planing knives: 4pcs Planing shaft speed: 5200min¯¹ Max. planing width: 410mm Feed rate feed speed: 6 / 12m/min SCOPE OF DELIVERY - Dressing join fence with round bar guide - Num. Display thicknessing table positioning - 2 feed speeds in wood infeed - Tersa planer shaft Holzkraft dealer - accessories available on request!

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Fpjdpfovyupzex Ah Ijr

Condition: new, Holzkraft minimax st 1g saw-milling combination (5501048) With tiltable saw blade, rigid milling spindle and format sliding carriage made of anodized aluminum. DESCRIPTION - Work table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operation - Unique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precision - Cutting plane directly on the saw blade - Swiveling saw blade from 90° - 45 - Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpieces - Milling protection hood for profiling - Two independent motors for each working unit TECHNICAL DATA Dimensions and weights Weight (net) approx.: 190kg Suction connection Suction port diameter: 120mm Suction port diameter saw blade guard: 60mm Electrical data Supply voltage: 400V Mains frequency: 50Hz Rated operating mode of drive motor: S6 Duty cycle drive motor: 40% Power drive motor: 2 x 1,8kW Sliding carriage and table sliding table length: 1140mm format sliding carriage width: 201mm format sliding carriage height: 70mm table length: 1040mm table width: 224mm Milling spindle spindle mandrel diameter: 30mm useful length of spindle: 75mm spindle speeds: 5000/7500min-¹ Milling tool diameter max. Fpedpfekzkwuox Ah Ior Tool diameter max: 160mm tenon milling tool diameter max: 200mm Circular saw unit trimming length: 1200mm Cutting width with rip fence: 700mm Max. Trimming width to the left of the saw blade: 1200mm Saw blade inclination: 90 - 45°. Max. Cutting height 90°: 75mm Max. Cutting height 45°: 60mm Max. Saw blade projection 90°: 67mm Max. Saw blade projection 45°: 40mm Diameter (main) saw blade: 250mm Speed (main) saw blade: 4000min-¹ Made in Italy Holzkraft dealer - accessories available on request!

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Fodevxr S Rjpfx Ah Ijpr

Condition: new, Holzkraft minimax fs 30c TERSA jointer thickness planer 5503031 With TERSA planer blade quick change system With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Diagonally toothed steel infeed roller for constant and even wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when the dressing tables are opened Dressing tables opening to the rear The high machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Cast iron work tables, re-annealed and stress relieved, thus insensitive and permanently flat Table lips for quiet running TECHNICAL DATA: Dimensions and weights length (product) approx. 1725mm width/depth (product) approx. 880mm Weight (net) approx. 270kg Dresser Total length of the tables 1500mm working height 900mm chip removal max. dressing 4mm Connection suction suction port diameter thickness 2 x 120mm Installation information Required space length 1725mm Space requirement width/depth 1350mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Machine body length 659mm Machine body width/depth 488mm Working area length 1000mm Working area width/depth 3500mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 565mm Thickness table width 300mm Working height thickness min. 3mm Working height thickness max. 230mm Fpedjkknb Hjpfx Ah Ier Chip removal max. thickness 4mm Electrical data Power drive motor 4kW Supply voltage 400V Mains frequency 50Hz Planing cutterhead Type of cutterblock TERSA Planing shaft diameter 72mm Number of planing knives 3pcs Planing shaft speed 5200min¯¹ planing width max. 300mm Feed rate feed speed 7m/min SCOPE OF DELIVERY: TERSA planer cutterhead anodized aluminum jointer fence Holkraft dealer - accessories available on request!

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Fodpfx Ahohp Rc Ij Ijpr Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Fodpjvwgc Uefx Ah Iepr

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Fpjdpfxjr A Eq Ro Ah Ijr Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Fjdsiidnfepfx Ah Iopr Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Fpjdpjvwgaasfx Ah Ior

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm Fpodpfx Asi Dphtjh Isr table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Fpjdpecnxaysfx Ah Isr Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Fjdpfecnxa Ssx Ah Ijpr Art: No. 5500557

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground Fedpfxjcnxa Ne Ah Iepr light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: new, Year of construction: 2025, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm Fpjdpfjff Hdbsx Ah Isr width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: new, Year of construction: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Fjdpexw N Sbofx Ah Ispr Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Fedpfx Ajxw N N Hjh Ispr Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2021, planing width: 520 mm, number of planer blades: 4, height adjustment type: electric, Equipment: motor brake, SCM Minimax FS 52ES Planer-Thicknesser – 2021 – 7 kW – Digital Display – Electric Height Adjustment – Tersa Cutterhead For sale is an SCM Minimax FS 52ES, year of manufacture 2021, from a private owner (no commercial use). Features: + Combined planer and thicknesser + Motor: 7 kW + Planing width: 520 mm + Tersa cutterhead + Digital display for thickness setting + Electric height adjustment + Solid cast iron table, smooth operation + Weight: approx. 700 kg Fpjdpoxrr Tdofx Ah Ijr Location: Haldensleben Price: €8,650 – differential taxation Private sale – no warranty, no returns. Viewing and test run by arrangement possible. Article number: 5503511 / 5503501 Stürmer / Holzkraft / SCM

Condition: new, Edge sanding machine KSO 150 M F 3 PRO Holzkraft Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Drive power: - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm - Worktable width: 280 mm Fpjdpfxou R S Dzs Ah Ier - Table tilt: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. - new exhibition machine -

Condition: used, Year of construction: 2004, machine/vehicle number: 08558, Bohreraufnahme : Zweibackenfutter Drehzahlen : 2800 U/min Bohrhub : 200 mm max. Bohrtiefe : 150 mm Bedienung : Einhand Betätigung der Höhenverstellung : manuell Spannzylinder : 1 Stk Spannzylinderbetätigung : Handexzenter Bauformen : verfahbarer Bohrkopf Bohrkopf neigbar : Ja Tischbreite : 630 mm Tischtiefe : 285 mm Fpjdpsxbiu Rjfx Ah Ier Gewicht ca. : 240 kg Motorleistung : 2,2 kW Absaugdurchmesser : 80 mm

Condition: used, Year of construction: 2003, machine/vehicle number: 4196, Tischlänge : 2500 mm Tischbreite : 800 mm max. Tischhub : 650 mm Ständerkröpfung : 1000 mm Druckschuh : 600 Schleifschuhlänge : 300 mm Schleifschuhbreite : 150 mm Schleifbandlänge : 6400 mm Schleifbandbreite : 150 mm Bandabblaseinrichtung : Nein Obere Bandabdeckung : vorhanden Bandgeschwindigkeit 1 : 18 m/sec Laufrichtung : Links/rechts Gewicht ca. : 390 kg Motorleistung : 3 kW Absaugdurchmesser : 2x100 mm Fjdpfxerc I N Sj Ah Iopr

Condition: used, Used machine Year of manufacture: 2022 Also suitable for small craft businesses for occasional use Combination sanding unit with sanding shoe for fine sanding Standard equipment includes inclined-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust mono-block steel machine body with tube reinforcement, robot welded, with work units mounted high for maximum rigidity Motorized height adjustment of the worktable with digital display Electronically controlled sanding belt oscillation Fpodpsx Hbr Ijfx Ah Ior Feed carpet driven by gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers in front of and behind each work unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universal application for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Maximum working width: 950 mm Equipment details: Combination unit for calibration and sanding Inclined-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite backing Universal design for calibration and sanding work on solid wood, chipboard, and veneer Sanding belt length: 1525 mm Sanding belt width: 970 mm Feed speed: 4.5/9 m/min Workpiece height: min. 4 mm / max. 170 mm Motor: 7.5 kW Extraction port: 140 mm Dimensions (LxWxH): 1388 x 1545 x 1668 mm Availability: Approx. end of January 2026 Location: NRW