Used Holzkraft Minimax Sc 4E 23 for sale (175)

Condition: new, Year of construction: 2026, Feed unit with a consistent feed rate and no power loss Metal gearbox with hardened gears Metal cover for the feed rollers Right-hand and left-hand operation Powerful motor Durable PU feed rollers Tripod with extended outrigger arm as standard Individually adjustable for horizontal and vertical use With counter Hedpfx Aocnxmzonpsp Model VSA 48 L Article no. 5115500 Technical data Max. outreach 1050 mm Number of feed rollers 4 Roller diameter 120 mm Roller width 60 mm Roller travel 25 mm Speed stages 8 Speeds 2/4/5.5/6.7/11/13/16.5/33 m/min Motor power 0.75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table Hjdpsxw N N Hofx Anpep On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Hedpei Dphtofx Anpjp Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Hsdpfx Anecnxayopjp Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back Hjdpfx Ajcnxa Sjnpep 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2026, Enclosed and secure sawing area for increased safety through a legally required saw guard. Anti-rotation mechanism for the wood thanks to stamped-in barbs on the saw frame. Sturdy, torsion-resistant steel frame. Transport device for easy movement. Impact-resistant, scratch-resistant, and weather-resistant thanks to high-quality powder coating. Phase inverter. Dimensions and weights Working height: 700 mm Saw frame support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Drive type: Electric motor with direct drive Electrical data Power consumption: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Saw blade Diameter: 700 mm Hjdpfx Anshkz Hiepep Cutting capacity Saw frame, round timber: 250 mm Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale.

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Hedpfshk Dfrox Anpep Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Hodjvk Sdkjpfx Anpep Work table dimensions: 495*356 mm Cutting speed: 650/400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with stop: 321 mm Saw band length: 2562 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 550 watts/230 volts Weight: 80 kg Dimensions in mm: 610*445*1753 Extraction nozzle diameter: 100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Hedehp Rc Iopfx Anpep Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Hodshkz Hmopfx Anpjp Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Hsdjhk S Sdepfx Anpep Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extraction unit ASA 1903 Mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Hodshk S Shspfx Anpep The extraction unit can be rotated by 180°, allowing extraction from below or above Sturdy metal fan impeller Comes standard with a high-quality chassis for better stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 110 l External diameter of extraction nozzle, inlet 203 mm External diameter of extraction nozzle, outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/Depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data No-load speed 2950 min¯¹ Power consumption 1.5 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 1.92 m² Noise emission Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Maximum negative pressure 1700 Pa Scope of delivery: Filter bag, chip bag Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extraction unit ASA 4303 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, enabling extraction from below or above Robust metal fan impeller Equipped as standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 215 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/Depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Power consumption 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Maximum negative pressure 2000 Pa Scope of supply: Two filter bags, two chip collection bags Hjdpfehk S Slsx Anpep Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection Hedpfocnxa Njx Anpop The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Hedpfslht Htjx Anpjp Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Hodpfovk Sd Dsx Anpep Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 610 * 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with stop: 370 mm without stop: 410 mm Saw band length: 3345 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 1550 watts/400 volts Weight: 130 kg Dimensions in mm: 680*512*2048 Extraction nozzle diameter: 2*100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard chassis Dimensions and weights Chip collection volume 175 l Nominal outer diameter of extraction nozzle inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality design Easy to move thanks to swivel casters Low power consumption Hsdpfjhk S Szjx Anpep Extraction units comply with dust class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: new, Year of construction: 2026, Holzkraft bandsaw HBS 533 S. Heavy-duty professional model with high weight for maximum smooth operation. Particularly quiet and precise operation thanks to a torsion-resistant machine housing. Large, one-piece cast iron saw table, swiveling from 0° to +20° with a ground and polished surface. Patented table tilting mechanism with handwheel and rack and pinion. Saw blade quick-release tensioning system. Ceramic saw blade guide rollers. Large cast iron parallel fence. Fast and precise adjustment of cutting height via handwheel and rack and pinion with millimeter scale. Safety switch for automatic shutdown when the door is opened. Large cast iron parallel fence. Comes standard with a miter gauge. Flywheels made of cast iron with a special coating on the running surfaces. Inspection window for checking the saw blade run. Professional saw table guide. The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack and pinion guide. The tilt is continuously adjustable from 0° to +20°. Patented. Hjdpfeb S Uzkex Anpop Work table dimensions: 750 x 530 mm Cutting speeds: 1400 m/min. Flywheel diameter: 530 mm Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Bandsaw blade length: 4190 mm Precision guide: top / bottom Saw table tilt: 0° - +45° Motor power 400 V/50 Hz/P2: 4.0 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 Dust extraction port diameter: 2 x 100 mm Location: In stock, Bitburg.

Year of construction: 2026, condition: as good as new (ex-display), Professional-grade woodworking vises Precise and meticulous workmanship Made entirely of dampened, solid beech wood All important edges are rounded Surfaces are treated with environmentally friendly oil Standard equipment includes a tool drawer The two cylinder rods of the clamping jaws are precisely and securely guided within a cast part Equipped with a smooth-running trapezoidal thread spindle With a French front clamp and a German rear clamp with linear guide, two short round bar hooks, two long round bar hooks, a drawer, and an accessory drawer Finger zinc coating on the rear clamp and accessory drawer back Length of working surface without clamps: 1915 mm Width/depth of working surface without clamps: 615 mm Working height: 870 mm Length of front clamp: 520 mm Length of rear clamp: 450 mm Hedpoc Uydaefx Anpop Width of front clamp: 70 mm Width of rear clamp: 140 mm Clamping range of front clamp: 190 mm Clamping range of rear clamp: 180 mm Clamping range of front clamp to the center of the round hook: 225 mm Clamping range of rear clamp to the center of the round hook: 265 mm Plate thickness: 50 mm Length (product): 2120 mm Width/depth (product): 790 mm Height (product): 870 mm Weight (net): 91 kg Location: In stock at warehouse 54634 Bitburg

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Hedoff Ed Tepfx Anpsp Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short-term

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Optimal price-performance ratio. Additional ESE equipment: Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Drawer-type grinding attachment. Integrated work table lighting. Equipment details: Hsdpfxeff Hdfs Anpop Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Continuously variable feed rate Infeed height remains constant Models str l with continuously adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Motorized height adjustment of the units Units can be switched on individually Feed rate continuously adjustable Hodpfx Ajff Hdgonpjp Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle, without extraction) 65 dB(A) Grinding unit Grinding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Hsdpfx Ajlht H Nsnpep Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard chassis Dimensions and weights Chip collection volume: 175 l Nominal outer diameter of suction nozzle inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2.2 m² Noise emission Maximum sound pressure level: 83 dB(A) Volume flow Nominal volume flow: 2200 m³/h For milling, planing, and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality design Easy to move thanks to swivel casters Low power consumption Extraction units comply with dust class L Hodpfjhk S S Ejx Anpjp Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: new, Year of construction: 2026, Rapid belt tensioning via lever Upper belt support with graphite coating 250 mm diameter weighted belt pulleys ensure optimal drive. With electric height adjustment With dust extraction and noise reduction features With noise reduction certificate With two speeds Adapts to surfaces through a pivoting sanding shoe For processing beveled surfaces Standard with right and left rotation The rapid belt tensioning enables quick and easy changing of the sanding belts. Delivered partially assembled Dimensions and weights Length approx. 4540 mm Width/Depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Hedpfx Ansff Hdbopop Dust extraction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm Working width max. on table 900 mm Electrical data Power of height adjustment motor 0.37 kW Power of dust extraction motor 0.75 kW Power of drive motor 3.3 / 4.5 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s Sanding shoe length 360 mm Sanding shoe width 150 mm Workpiece Height max. 590 mm Height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table: Processing of the workpiece with an overhang to the right over the work table is possible.