Used Holzkraft Minimax Twf 55Es M for sale (181)

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi Gjdpfx Aelht Htsafebi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 533 S. Heavy professional design with high dead weight for maximum running smoothness especially smooth and precise running thanks to torsion-free machine housing large dimensioned cast iron saw table in one piece, tiltable from 0° to +20° with ground and polished surface patented table tilting device with hand wheel and toothed rack saw band quick clamping ceramic saw band roller guide large cast iron parallel fence fast and precise cutting height adjustment via handwheel and toothed rack with millimetre scale safety switch for automatic shut-off when opening the door large cast iron parallel fence standard with angle stop flywheels made of grey cast iron with special coating on the running surfaces Inspection window for checking the saw blade running Professional saw table guide the heavy, massive saw table made of grey table is easily and comfortably adjusted by a handwheel rack and pinion guide system the inclination is steplessly adjustable from 0° to +20°. Gbjdob S Uzkspfx Aafoi Patented working table dimensions 750 x 530 mm cutting speed 1400 m/min. flywheel Ø 530 mm max. cutting height 350 mm max. cutting width with fence 465 mm max. cutting width without fence 510 mm band saw blade length 4190 mm precision guide top / bottom saw table inclination 0° - +45° motor power 400 V/50 Hz/P2 4,0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Suction port diameter 2 x 100 mm Location: ex stock Bitburg

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: Godpfx Aehk S S Eeafjbi System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 Gbodpevk Sfbjfx Aafei DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Gbsdpfx Aecnw T Isafei Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterblock and planing knives - quick change system Gedebuldyjpfx Aafsbi Tersa planing knife system enables knife change in seconds and particularly quiet operation Skew toothed steel infeed roller for constant and uniform wood infeed Extra long planing tables Large dressing fence can remain in position when opening the dressing tables. Rear opening dressing tables High machine weight Powerful industrial motor Robust cast steel construction Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm working width: 300 mm max. chip removal: 4 mm dimensions thicknessing table: 565 * 300 mm min./max. working height: 3/230 mm feed speed: 7m/min planer shaft diameter / planer knives: 72mm / 3 pcs. speed: 5200 rpm motor 400V/50Hz/S6 - 40%: 4,0kw (5,5PS) Suction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized planing fence Available ex stock Bitburg - immediately available-

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Power drive motor 3,0 kW Supply voltage 400 V Grinding unit Gjdpfelht H Nsx Aafebi grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Gbodpfsff Hdbjx Aafsi Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding work Motorised height adjustment of the working units with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Inlet height constant Models str l with infinitely variable, inverter-controlled brush speed: this enables the speed to be precisely adapted to the material, making them particularly suitable for sensitive materials. Unit for saw-cut optics optionally available Dimensions and weights Gbjdpfsff Hdisx Aafji Length approx. 1300 mm width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Suction nozzle diameter 2 x 150 mm Brushes diameter 190 mm length 300 mm revolution 1500 min-¹ Electrical data Drive motor power 2 x 3.0 kW Power feed motor 0,22 kW Input power 6,25 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound power level Lw (idling without extraction) 65 dB(A) Sanding unit grinding width max. 300 mm Feed unit Feed speed 1 - 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) Gsdpshk S Stefx Aafebi 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Gedpfx Ashk S Swjafjbi Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted Gbsdpfev Sk Nnsx Aafoi TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Gbodpfsv Sk Tmjx Aafei Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Gbedpfxohkzttj Aafei Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm Godpeci Tvhofx Aafsbi planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Gjdov Nhg Sepfx Aafobi Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: new, Table router HOLZKRAFT t 45c LL With table extension right and left, and extendable workpiece support ----- Technical data ----- Table size: 1,945 x 695 mm, max. spindle projection over table: 130 mm, Useful length of milling spindle: 100 mm, max. retractable milling cutter Ø: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, Godpfx Aou U Rfpsafobi suction nozzle Ø: 2 x 120 mm - Special offer price - - new exhibition machine -

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, Gbsdjvl Eynopfx Aafoi drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Worktable rotation: ±60° Worktable length: 565 mm Worktable width: 315 mm Godjw E Tz Ejpfx Aafsbi Extraction port diameter: 90 mm Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: short-term Location: Saxony-Anhalt

Condition: new, Year of construction: 2025, Cutting length: 5100 mm Cutting height: 2200 mm Cutting depth: 60 mm Scoring unit: yes Feed: manual Horizontal cut display: digital Vertical cut display: digital Saw blade diameter: 300 mm Swing-out material support: yes Saw blade speed: approx. 4000 rpm Motor power: 3 kW Machine length: 6300 mm Machine depth: 1800 mm Machine height: 3100 mm Gjdshpma Espfx Aafsbi Weight: 850 kg

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Gbedpfxsxzfw Uj Aafei Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Gedpfx Asxua N Seafjbi Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Gsdpoxtgz Esfx Aafjbi Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 3 chip collection bags of 175 liters each Gbodpfxsxvxnco Aafei Suction nozzle 200 mm Airflow volume 3,300 m³/h Motor power 3 kW Filter area 3 x 2.2 m² The extraction unit was used once on a rental basis

Condition: new, Year of construction: 2022, Suction nozzle diameter: 200 mm Nominal flow rate: 2800 m³/h Chip bag capacity: 2 x 120 l Filter cleaning: manual Motor power: 2.2 kW Gjdpfx Aasv R U H Ujfebi Dimensions: 1500 x 500 x 2100 mm (L x W x H) Weight: 53 kg