Used Holzkraft Rla 1213 for sale (215)

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Ncedpfx Absd Hx Hmo Ijl Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Nodpfxed Hx Hnj Ab Iscl Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four großdimensonierten screws ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Thickness table adjustment at 41 S elite s through a Handwheel with numeric display for the planing height (exactly 1/10 mm) Dimensions and weights Length approx. 900 mm Width/height 1070 mm Weight approx. 361 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 5 main motor kW Installation information Space length 1070 mm Space width/depth 900 mm Space height 1100 mm

Condition: new, Year of construction: 2026, Holzkraft sliding table saw with scoring device Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Ncjdpfx Abjih Dwvs Ijl Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminum telescopic stop Angle adjustable With two professional folding fences Ek2a0i2ik Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminum format sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm trim length 1660 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 79 mm max. clearance width to the left of the saw blade 1270 mm Cutting width with rip fence 900 mm saw blade inclination 90° - 45 saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm Main saw blade speed 4000 min-1 Speed scoring saw blade 7600 min-1 Electrical connection 400 V / 50 Hz motor power 4,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing, milling, planing/thickness planing and optional slot drilling in confined spaces High-precision format sliding carriage made of anodized aluminum, various lengths Large extension arm (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional fence flaps Max. Saw blade Ø 315 mm, tiltable from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° backwards Four milling speeds up to 10000 min-¹, manually adjustable With right-left rotation of the milling spindle Heavily ribbed dressing tables made of stress-free gray cast iron for decades of stability and flatness 2-stage feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch, motor protection switch Fixed hand wheels Dimensions and weights Weight (net) approx. 857kg Dressing table Dressing table width 410mm Dressing table length 2000mm chip removal max. dressing 5mm Connection suction Suction port diameter 3 x 120mm Suction port diameter saw blade guard 60mm Installation information Required space length 5960mm Space requirement width/depth 5140mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Working area length 1600mm Nodpfx Aboih Dxle Iscl Working area width/depth 1600mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 757mm Thickness table width 423mm Working height thickness min. 3mm Working height thickness max. 230mm Chip removal max. thickness 5mm Electrical data Supply voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5,0kW Sliding carriage and table sliding table length 2660mm Format sliding carriage width 360mm format sliding carriage height 142mm table length 1250mm table width 430mm table height 900mm Milling spindle spindle inclination 0 - -45 spindle mandrel diameter 30mm useful length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min⁻¹ Milling tool diameter max. Tool diameter max. lowerable 210mm tool diameter max. lowerable 45° 150mm tool diameter max. tenon milling 275mm Planer cutterhead Type of cutterblock TERSA planing shaft diameter 87mm Number of planing knives 4pcs planing shaft speed 5200min-¹ Circular saw unit trimming length 2600mm Cutting width with rip fence 900mm Max. Cutting width left of saw blade 3260mm saw blade inclination 90 - 45 Max. Cutting height at 90° 90mm Max. Cutting height at 45° 63mm Max. Saw blade projection 90° 100mm Max. saw blade Saw blade projection 45° 71mm Diameter (main) saw blade 315mm Explanation Diameter (main) saw blade with scoring device Speed (main) saw blade 4000min-¹ Feed rate Feed speed 6 - 12m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Ncodpfx Aoci Tvhjb Iol Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four large screws, ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Nedpfx Abod Hx Hpj Iscl Motor thickness table height adjustment at 52 S elite s Height adjustment of the Thicknesser table motor with electronic number For greater precision and more ease of use Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight 455 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 7 main motor kW Installation information Space length 1440 mm Space potatoes

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Ncodpfexw N N Hjx Ab Iol Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Nodexw N Sbopfx Ab Iscl Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg Nedpfx Abju R Sztj Ijcl - new exhibition machine -

Condition: new, VSA 2048 L Holzkraft Feeder - Exhibition Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Nedpfx Aowfhg Nob Iocl Dimensions and weights: - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm Nedpevxkv Ujfx Ab Iocl - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine - Nodpfxju R Sz Tj Ab Iecl

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Nodpfsu R S Awox Ab Iecl Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Nodpfxou R S Ero Ab Iecl Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, Njdsu R Sy Nopfx Ab Iocl max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Nsdpfx Aeu R S Aksb Ijcl Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Ncsdpfxsv Nhg Ss Ab Ijl Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility Nedpswnrf Usfx Ab Iecl - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Ncjdpsu R S Dhefx Ab Iel Weight: 385 kg - new exhibition machine -

Condition: new, Edge sanding machine KSO 150 M F 3 PRO Holzkraft Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Ncsdpfxju R S Dzj Ab Iol Drive power: - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm - Worktable width: 280 mm - Table tilt: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. - new exhibition machine -

Condition: new, Minimax ME 35 TR S Holzkraft Edge Banding Machine Nodpfxev Nhhpo Ab Iscl -Exhibition Machine- This offer is an equipment package. The following items and options are already included in the price: - New exhibition machine -

Condition: new, Table router HOLZKRAFT t 45c LL With table extension right and left, and extendable workpiece support ----- Technical data ----- Table size: 1,945 x 695 mm, Nedpsu U Rfpsfx Ab Iocl max. spindle projection over table: 130 mm, Useful length of milling spindle: 100 mm, max. retractable milling cutter Ø: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, suction nozzle Ø: 2 x 120 mm - Special offer price - - new exhibition machine -

Condition: excellent (used), Spindle Moulder HOLZKRAFT Ti55es - used - Swivelling, fine-adjustable fence, forward/reverse rotation, socket for power feed ----- Technical Data ----- Swivel range: 0–45° Table size: 1,080 x 655 mm Spindle diameter: 30 mm Usable spindle length: 125 mm Max. cutter diameter: 240 mm Speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm Motor: 5 kW Extraction port Ø: 120 mm Lower extraction port Ø: 120 mm Dimensions (L x W x H): 1,200 x 855 x 1,260 mm Weight: 423 kg Quality Info: - Spindle runout accuracy checked Ncjdpexrndlsfx Ab Isl - Brake checked - Full basic inspection - Full basic cleaning - Electrical system checked - Immediately ready for operation

Condition: used, Year of construction: 2003, Table length: 2500 mm; Table width: 800 mm; Max. table stroke: 650 mm; Column offset: 1000 mm; Pressure shoe: 600; Grinding shoe length: 300 mm; Grinding shoe width: 150 mm; Sanding belt length: 6400 mm; Sanding belt width: 150 mm; Belt air-blast device: No; Upper belt cover: present; Belt speed 1: 18 m/sec; Belt direction: left/right; Weight approx.: 390 kg; Motor power: 3 kW; Extraction diameter: 2x100 mm Storage location: Ncodpfjrc I N Sox Ab Ijl

Condition: used, Year of construction: 2004, Drill chuck: Two-jaw chuck; Speeds: 2800 rpm; Drilling stroke: 200 mm; Max. drilling depth: 150 mm; Operation: Single-handed; Height adjustment: manual; Clamping cylinder: 1 pc; Clamping cylinder activation: Hand-operated eccentric; Version: movable drill head; Drill head tiltable: Yes; Table width: 630 mm; Table depth: 285 mm; Weight approx.: 240 kg; Motor power: 2.2 kW; Extraction diameter: 80 mm Location: Customer Ncjdpfxjxbiu Re Ab Iol