Used Homag Edgebander for sale (470)

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer Codjyic Tuspfx Ah Iogp - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: used, functionality: unexamined, machine/vehicle number: 2-055-06-1680, Ferwood Code: RU0010260 - Manufacturer Code: 2-055-06-1680 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Cgedpfx Ahjv Izyvo Ijp

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Codpfx Aex D Ribsh Iegp • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: used, machine/vehicle number: 008403, Max. machinable height: 160 mm Maximum machinable width: 250 mm Cgsdeykivhopfx Ah Ijp Max. forward feed speed: 24 m/min Operator shafts number: 5

Year of construction: 2019, condition: ready for operation (used), spindle speed (max.): 8,000 rpm, This HOMAG Optimat LPP306 was manufactured in 2019. A used planing and profiling machine featuring six working spindles, it handles workpiece widths up to 250 mm and heights up to 160 mm. Equipped with PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Contact us for more information about this machine. • Workpiece width after processing: 10–250 mm • Workpiece height after processing: 10–160 mm • Control: PowerControl with powerTouch LPP300 • Feed table length: 2,500 mm • Feed speed: 6–24 m/minSpindles: • First lower spindle: • Motor power: 7.5 kW (Siemens IE3) • Speed: 6,000 rpm • Spindle diameter: 40 mm • Spindle length: 281 mm • First right spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First left spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First upper spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) Cjdpfxoygvnpj Ah Iogp • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm • Second upper spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Second lower spindle: • Motor power: 7.5 kW, speed infinitely variable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-KDF 860 C Cgsdpfxjx Hpkls Ah Ijp Position 2: Panel Return Systems HOMAG-KDF 860 C

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Cjdex A Hi Ispfx Ah Iogp Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Cgedpfx Ahsyilxme Iop Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: ready for operation (used), Year of construction: 2006, This HOMAG Brandt Profiline KDF - 780 was manufactured in 2006. It features a swiveling control panel, durable keypad, and a color graphic flat screen. The edgebander handles edge thickness from to mm and workpiece thickness up to 60 mm. Variable feed rate is 20 m/min. Overall length is 7360 mm. Contact us for more information about this machine. Cgjdpfjx Enkbsx Ah Iep • Edge thickness: mm • Roller diameter max.: 3 x 45 mm or 0.8 x 65 mm • Workpiece thickness: 8 - 60 mm • Variable feed rate: 20 m/min • Electrical connection: 400 V - 3 Ph. - 50 Hz • Pneumatic connection: 6 bar • Swiveling control panel at the machine inlet • Durable short-stroke membrane keypad • Color graphic flat screen • Industrial PC with CompactFlash disk for mass storage • Aggregate function keys with LED status indicator • Operator guidance via color pictograms • Online language switching between various foreign languages • Overall length: 7360 mm

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, Woodworking centre Homag PROFI BOF 411/45/PM. Used condition. Codpjydqx Rofx Ah Isgp

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, operating hours: 29,000 h, workpiece height (max.): 40 mm, feed rate X-axis: 25 m/min, total length: 7,755 mm, controller model: PowerControl PC22, working height: 950 mm, TECHNICAL DETAILS Cgodpfoyc S Hasx Ah Isp Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece protrusion: 30 mm Workpiece thickness: 12 - 40 mm Edging material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edging material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Workpiece support with scissor-design and roller support, extendable to 1000 mm Automatic infeed guide adjustment Fixed stops on left side Pneumatically controlled infeed lock Top pressure via driven composite V-belt Electrical height adjustment Workpiece transport unit via transport chain with rubber coating Separating agent spray unit, top/bottom Joint trimming unit 2 x 3 kW Gluing unit A20 with 2 rollers, comprising workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roller magazine, pressure zone C (automatically adjustable with 1 pre-press roller and 6 post-press rollers) Trimming unit HL84 0.8 kW, with automatic chamfer/straight adjustment and pneumatic flush/excess trimming adjustment Pre-milling unit 1.5 kW, pneumatic adjustment between flush and excess milling Contour milling unit FK11 with automatic adjustment from chamfer to radius milling Profile scraper PN10 (with pneumatic side retraction) Finishing unit (with pneumatic side retraction), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, operating hours: 33,000 h, workpiece height (max.): 60 mm, feed rate X-axis: 25 m/min, controller model: Power Control PC22, working height: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness of 22 mm: 55 mm Minimum working width at workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strip max.: 0.4 - 20 mm Edge cross-section, strip max.: 900 mm² Edging material, coil: 0.3 - 3 mm Max. edge cross-section for PVC: 135 mm² Cgsdpfx Aheyc Sr As Isp Max. edge cross-section for veneer: 100 mm² Max. roll diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive on feed stop Glue pot lift-off at feed stop Glue pot clamping, workpiece actuated Infeed fence automatically adjustable Infeed lock pneumatically controlled Infeed device with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed for Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data collection Electric height adjustment Fixed stop on left side Workpiece transport system Top pressure Separating agent spray unit Jointing cutter unit, 2 x 3 kW Gluing station A20 Basic for coil material up to 3 mm and strip material up to 20 mm, with melting unit with granulate tank and quick-change system Cross-cutting unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spray unit Pre-milling unit 1.5 kW, pneumatically adjustable Profile trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi-finishing unit MN21 automatic Finishing unit FA11, with finishing station, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Spare position for additional processing units Note: The machine is sold without consumable tools. Container loading and seaworthy packaging by the seller is not possible.

Condition: used, Year of construction: 2010, machine/vehicle number: 0-200-95-8810, functionality: fully functional, operating hours: 24,804 h, We have a fully operational Single side edge bander with return conveyor very high spec machine .The machine is currently being used so more than welcome to see it run. Cgodsx Upuaspfx Ah Isp

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Cgodpfx Ahjx Swf Uj Iop

Condition: used, Year of construction: 2008, total height: 1,800 mm, total length: 7,500 mm, total width: 970 mm, Weight: 5.500 kg Csdpfxsychw Ie Ah Iegp - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 7500mm x 970mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Cgodpfx Ahoyghwco Ijp Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Condition: reconditioned (used), Year of construction: 2018, operating hours: 2,214 h, functionality: fully functional, machine/vehicle number: 0-341-07-3040, BUILT-IN STANDARD FEATURES: • Saw blade projection: 60 mm • Right-hand machine • Rollers on front tables • 6 clamps – 3 double-finger and 3 single-finger Codpfx Aheyg Nars Iegp • Scorer motor power: 1.1 kW • Saw carriage speed: 120 m/min • Cutting line: 3200 mm • Machine table in cutting line with air cushion • Stepless pressure beam control • Main saw motor power: 9.2 kW • Labeling software MACHINE OPERATION: • Operating panel • CADMATIC ADDITIONAL INFORMATION: • Data transfer to machine • Intelliguide basic DOCUMENTATION: • Supported languages: Polish • Format: Data carrier + printed documentation GENERAL INFORMATION: • Control: Windows 7, POWERTOUCH • CE mark: Yes • Availability/start-up: March/April 2026

Condition: used, machine/vehicle number: 007516, Max width workable: 2400 mm Csdpfxewuz D Tj Ah Ijgp

Condition: used, machine/vehicle number: 008169, X axis working area: 4500 mm Y axis working area: 1550 mm Working Table: Pod and Rail Cgodpfx Aexaud Ish Iop Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28 Cgodpfxewcyd Is Ah Isp

Condition: used, machine/vehicle number: 006082, Max. panel width: 1300 mm Max. panel length: 3000 mm Rotation system: double cone Csdpjwaymwofx Ah Ijgp Rotation direction: from transverse to long

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Cgjdpfx Aju N Slvjh Iop Max. panel length: 3200 mm

Condition: used, machine/vehicle number: 005385, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Csdpeg Iy Duefx Ah Ijgp Operating Units: 8 nr

Condition: used, machine/vehicle number: 006253, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Cgsdpel Txxgsfx Ah Iep Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, machine/vehicle number: 007998, Max. panel width: 1900 mm Max. panel length: 2700 mm Cgsdjw Idacjpfx Ah Iop Max. forward feed speed: 30 m/min