Used Homag Edgebander for sale (488)

Condition: used, Year of construction: 2011, machine/vehicle number: 0-201-50-1289, operating hours: 7,062 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, controller model: POWERCONTROL PC 85, plate height: 300 mm, spindle speed (max.): 24,000 rpm, CNC machining center for milling, drilling, and edge banding! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of working stations: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total number of tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Flow rate of vacuum pump: 300 m³/h Positioning via NC Vacuum suction cups for workpiece clamping Positioning of vacuum suction cups via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool change Milling spindle 2: Top Number of controlled axes milling spindle 2: 4 Automatic tool change milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Positioning: Mounted on the main beam of the machine Number of positions edge band roll magazine: 2 Gluing unit Glue tank for hot melt adhesive Pre-melter for hot melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: At the rear of the machine Dsdpjy Uviwsfx Alaecl Positions tool magazine 2: 2 Position tool magazine 2: At the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: At the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D: 350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Work table pod and rail NC-positioned workpiece clamping Vacuum suction cups Vacuum pump Drilling unit on top 2 milling spindles POWER EDGE 360° edge banding unit Glue tank for hot melt adhesive Pre-melter for hot melt adhesive Edge band roll magazine 4 tool magazines Barcode reader DATALOGIC Protective screen Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8527

Condition: used, Year of construction: 2012, power: 7.5 kW (10.20 HP), travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, number of slots in tool magazine: 12, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working area X 4000 mm Working area Y 1550 mm Working area Z 300 mm 1 milling spindle Main motor 7.5 kW Maximum speed 24000 rpm Tool clamping system HSK-F63 12 tool changer positions 17 vertical drilling spindles 2 horizontal drilling spindles X 2 horizontal drilling spindles Y Grooving saw, 90° swiveling Edge banding unit Separate Y-axis Console table, 6 consoles Vacuum pump Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Dsdpfjy S Edxox Alascl Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Dcsdpfoyy S Adjx Alael Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Length: 4150 mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 Dsdpfx Aljy Tnuveajcl MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Voltage: 400 V Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Cutting unit Rough milling unit Radius pulling unit Corner rounding unit Surface pulling unit Brushing unit

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Dedsywxraepfx Alajcl Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: Dcjdpfxozdzmkj Alaol 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Cutting unit (HL) Milling unit (MFL) Dcodpfozap H Sex Alasl Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm MACHINE DETAILS Gluing system: FE-MA-TECH Advanced PUR 2 kg

Condition: excellent (used), Year of construction: 2007, I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ. Dedpfx Alskbx Eaeaecl Year 2007. Working width 204 - 1304mm Working thickness 12 - 60mm Cutting width 100mm Free end width 300mm Feeding speed 10 - 40 m/min. Configuration: 1 + 1 Stk. cutting aggregates top + bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. grooving aggregate with jump for softforming function Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: used, Linear drive, linear gear, screw jack, spindle drive Dcodpfx Alob R Iuloasl -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with oscillation -Swiveling -side: adjustable -height: adjustable -Number: 4x units available -Price: per piece -Dimensions: 580/350/H460 mm Dedpfx Aeb Sc Sxslaocl -Weight: 28 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled Dcsdpfx Aeb Uhirslaol -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 630/420/H700 mm -Weight: 56 kg

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece Dodsb Uhk Uepfx Alascl

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table Dcjdpfx Asb Uhphelasl -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 500 mm -Length of the table surface: 10930 mm -Height of table surface: 262 mm -Working height: 262 mm -Price: per piece -Number: 1x available Djdpfxsb Uhpie Alaocl -Transport dimensions: 11370/510/H240 mm -Weight: 2020 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts Dcodob Uhpwepfx Alaol -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg

Year of construction: 1994, condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Dsdpfx Asb Uhp Tslaocl -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/500/H600 mm -Weight: 54 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge Djdpfx Aljb Uhrgjaecl -Dimensions: 480/350/H570 mm -Weight: 55 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Dcsdpfxeb Uhrnj Alasl -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edge of the workpiece and on top -each 2x corner copying units -2x engines Perske -Power: 0.3 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Dimensions: 650/4500/H700 mm -Weight: 86 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 71-12/2 -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts Dedpjb Uhugsfx Alaocl -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1230/1100/H600 mm -Weight: 342 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling Dcsdpfxob Uhvdo Alael -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 650/450/H600 mm -Weight: 74 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70.12/2.01 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm Djdpfxsb Uhvre Alaocl -Other engines with other services in stock for an additional charge -Dimensions: 1100/600/H1200 mm -Weight: 300 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske Djdsb Uhvtopfx Alaecl -with long shaft -Motor type: KNS 70.12-2DF -Power: 5.5/8.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz Speed: 2870/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1250/1350/H600 mm -Weight: 400 kg

Condition: used, Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2 -Type: 2083015201 -Number: 16x control cards available -Price: per piece Dedpfx Aocccxmslaocl -Dimensions: 20/190/H260 mm -Weight: 0.36 kg

Condition: used, Conversion processor, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2083027407 -Type: 2083027407 -Number: 10x control cards available -Price: per piece Dcjdpfxjccq Nrs Alaol -Dimensions: 30/195/H265 mm -Weight: 0.37 kg

Condition: used, Control card, hot melt adhesive, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 4-008-39-0001 -Type: 4008390001 -Number: 1x control cards available Dcodecc Ap Sjpfx Alaol -Price: per piece -Dimensions: 100/40/H170 mm -Weight: 0.34 kg