Used Hurco Cnc Lathe for sale (164)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: H-H40611, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Big Plus spindle recently replaced + internal coolant supply TECHNICAL DETAILS Travel X / Y / Z: 1067 / 610 / 610 mm Spindle speeds: 12,000 rpm Rapid traverse X, Y, and Z: 30 m/min Power: more than 15 kW Tool changer: 24 positions, ISO 40 Control: WinMax Ultimax 4 Table: 1270 x 610 mm Table load: max. 1350 kg EQUIPMENT - Chip conveyor - Oil cooler - Electronic handwheel - Internal coolant supply Ncodpfx Aewc R Dxjb Isl

Year of construction: 2001, condition: ready for operation (used), A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible. Ncedow Dfg Dopfx Ab Iel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Nedpsw Dfhzjfx Ab Iocl

Condition: used, Year of construction: 2004, HURCO VMX 64 X-axis travel: 1625 mm Y-axis travel: 865 mm Z-axis travel: 760 mm CNC control: Ultimax 4 table size: 1680 x 890 mm max. table load: 2000 kg spindle taper: SK 40 rapid traverse x/y/z: 18 / 18 / 13 m/min Ncodpfx Abowyna Ss Ijl drive capacity – spindle motor: 15 kW tool magazine: 40 positions max. spindle speed: 10,000 rpm machine fully operational

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm Ncjdpfxovh Nbue Ab Ijl table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 25 kVA, controller model: Ultimax 4, table width: 1,220 mm, table length: 510 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Hurco BMC 4020 CNC Milling Machine Ultimax 4 Control Travel X 1,020 mm, Y 510 mm, Z 610 mm Clamping Area 1,220 x 510 mm Tool Positions 24 x SK40 Spindle Speed 80-8,000 rpm Coolant System Nsdpjwa T Inofx Ab Ijcl Please contact us if you are interested.

Condition: good (used), Year of construction: 2007, No longer required in production. Parts are no longer required. Ncsdpsumt D Hefx Ab Iol

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: S10-1622378FKBCH, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Table length: 762 mm Table width: 406 mm Table load: 682 kg Table clamping area (L × W): 762 × 406 mm T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose to table: 102 – 610 mm Spindle Max. spindle speed: 12,000 rpm Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: 40 mm Speed control: infinitely variable Feed and rapid traverse Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Tool magazine Magazine positions: 20 Tool holders (SK40): not included Tool diameter: 89 mm Tool length: 250 mm Tool weight: 7 kg Accuracy Positioning accuracy (Pmax.): 0.01 mm Repeat accuracy (Ps): 0.005 mm Control system Control system manufacturer: HURCO MACHINE DETAILS Connected load: 15 kVA Operating voltage: 400 V, 50 Hz Weight: 2.85 t Nsdpjwd Nwysfx Ab Ijcl Footprint without internal cooling: 3.4 x 3.2 m Machine dimensions: 2.1 x 1.8 x 2.6 m Transport dimensions: 1.96 x 2.3 x 2.39 m EQUIPMENT - Continuously variable speed Adjustable - Digital technical documentation can be accessed via the control system - Without mounted machine vices and the tool holder and tool mounted in the spindle

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Ncedpfok Iugzex Ab Isl

Year of construction: 2003, operating hours: 4,689 h, condition: reconditioned (used), functionality: fully functional, 2023 comprehensively overhauled: - Spring assembly spindle renewed - Rotating union renewed - trackball renewed - Life support battery renewed - Graphic card regenerated - X-axis bearing new - backlash X-/Y-axis 0,015mm TECHNICAL DETAILS X travel: 1270 mm Y travel: 660 mm Z travel: 610 mm speed: max. 8.000 rpm table load: max. 1300 kg table size: 1500x660 mm tool changer: 24-fold/double arm tool holder: SK 40 DIN69871 Control: Ultimax 4 control MACHINE DETAILS spindle hours: 4.689 h, machine ran only 1 shift drive: 15 kW machine weight: approx. 9 t space requirement: approx. 4,8 x 4,5 x 2,95 m EQUIPMENT - Coolant system - Cooling through the spindle (IKZ) 20bar - chip conveyor - machine light - 2x color screens (working) - Removable electronic handwheel SOFTWARE - Pocket milling with islands - Synchronous tapping without compensating chuck - DXF software - 3D contouring software - Ultinet Ncodpfsl D Rubex Ab Isl - Advanced Velocity Control - Plunge Ramp/Helix

Condition: good (used), Year of construction: 2006, functionality: fully functional, You are bidding on a Hurco Winmax V9 package, suitable for Ultimax 4 machines built from 2006 onwards. The package has been properly uninstalled and can be reinstalled on all Ultimax machines built from 2006 onwards. Njdpfx Abjtu Uc Ee Iecl The price includes hardware and installation on site. All prices are exclusive of VAT. We also have other options in stock for Winmax machines. We will be happy to assist you with the installation. Please get in touch with us. You can no longer get service for your used Hurco milling machine? No problem! We offer service and retrofitting for ALL Hurco milling machines, regardless of the year of manufacture.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M342-06209041AFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Ultimax3, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel Travel X-axis: 760 mm Travel Y-axis: 510 mm Travel Z-axis: 610 mm Spindle Speed: 8,000 rpm Control: Ultimax3 Ncodsw E El Nspfx Ab Ijl MACHINE DETAILS Dimensions & Weight Dimensions: 2,600 x 2,300 x 2,800 mm Weight: 5,000 kg Taper: ISO 4 EQUIPMENT Clamping mechanisms by Kastr MU7 Vihorlat-brand vise Milling cutters with tapers Note: Axis no. 4 displays an error at startup, which is no longer shown after restarting.

Condition: good (used), Year of construction: 2002, functionality: fully functional, We sell two identical pieces Hurco VMX24, Ultimax 4, Year 2002. Nedpjwh Umujfx Ab Iocl

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M-44206402122CFA, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hurco VMX 42, year 2002 X travel: 1060 mm Y travel: 610 mm Z travel: 610 mm Control: Ultimax 4 Spindle speed: 10 – 10,000 rpm Tool holder: SK40 Tool magazine: drum type, 24 positions Feed rate XYZ: 3 – 7,000 mm/min Rapid traverse XY: 30 m/min Rapid traverse Z: 20 m/min Ncjdpfx Abjw Nirto Isl Table size: 1220 x 510 mm Table load capacity: 1.1 t

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, WE SELL AN NICE CONDITION BMC30/M MACHINE IS READY TO WORK WE SELL AN NICE WORKING CONDITION HURCOP -BMC-30 CNC Vertical Machining Center HURCO BMC 30/M Ncsdpfxjx N Ndws Ab Iel Year of manufacture: 1998 CNC path control Ultimax TRAVELS : X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 4 - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition READY TO WORK

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Nedpspiay Ssfx Ab Iecl Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Condition: used, turning diameter 256 mm turning length 483 mm greates pass round over bed 548 mm swing diameter over slide rest 320 mm length between centers 584 mm x-axis 203 mm z-axis 508 mm spindle tunring speed 4.800 U/min number of tool places 10 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Nodpfxsycxkls Ab Iscl Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2014, Technical details: turning diameter: 256 mm turning length: 455 mm swing diameter over slide rest: 260 mm travel -x axis: 198 mm travel -z axis: 508 mm turning speed range - main spindle: 4800 1/min power capacity - main spindel: 18 / 11 kW C-Axis: 0,01 ° turret (x-stations): 12 x VDI 30 Pos rapid power traverse in X-and Z direction: 19 / 24 m/min Number of driven tools: 12 Pos tool taper: VDI 30 Spindle speed driven tools: 5000 min -1 spindle hollow: 52 mm power capacity - driven tools: 4,4 kW total power requirement: 28 kVA Ncedpfx Abjx Th Amo Ijl weight of the machine ca.: 4.500 kg dimensions of the machine ca.: 2,9 x 2,3 x 2,2 m CNC lathe with tailstock, chipconveyor, hollow clamping cylinder, 3-jaw-chuck AUTO STRONG N 208, dia. 200mm, DXF, tooleye, Ultipockets, Synchronous threading, 3D Graphic, barloader ILS-BREUNING MUK 7012-III, Bj. 2017, accessories: incl. 2 pcs. live tools, incl. 34 pcs standard toolholders, hour meter: approx. 9.500h "machine on", approx. 2.000h "spindle on", approx. 300h "live tools on" *

Condition: excellent (used), Year of construction: 2019, 256mm maximum cutting diameter, 458mm max turned length, 4,800rpm spindle speed, 51mm bar capacity, 12 station VDI turret, 16kW spindle motor, Njdsx D Uy Rjpfx Ab Iocl Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor

Condition: excellent (used), Year of construction: 2011, operating hours: 2,400 h, functionality: fully functional, turning length: 340 mm, turning diameter: 254 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 355 mm, Working length 340 mm Max. working diameter 254 mm Swing over bed 405 mm Spindle speeds 6.000 rpm Spindle bore 45 mm Number of tools 12 pcs X-axis travel 170 mm Z-axis travel 355 mm Ncedpfx Aoxcx I Nsb Ijl Control MAX Running hours 2400 Main motor power 11 Kw

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m toolpiece turning speed range 0- 5000 U/min Nsdpev T Np Aofx Ab Iscl work piece power 5,5 kW main drive motor 15/22 kW weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: used, Year of construction: 2017, operating hours: 1,200 h, functionality: fully functional, turning diameter over cross slide: 256 mm, turning length: 527 mm, spindle bore: 52 mm, spindle speed (max.): 4,800 rpm, Equipment: rotational speed infinitely variable, Description: For sale is a HURCO TM8i VDI CNC lathe with MAX5 single control, year of manufacture 2017, with only approx. 1,200 operating hours. The machine is in excellent condition, has been regularly serviced, and is immediately ready for operation. Ideal for precise turning applications in small and medium-sized batch production. Accessories / Equipment: Ncjdpfx Aboxfgkke Iel • Tool presetter • Chip conveyor • Coolant system • Three-jaw chuck • Collet chuck with various collets • Mist extraction unit Condition: • Lightly used (only 1,200 hours) • Regularly serviced • Immediately available • Inspection by appointment possible

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,299 h, functionality: fully functional, spindle speed (max.): 4,500 rpm, travel distance X-axis: 290 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 55 mm, turning diameter over bed slide: 508 mm, Submitting a bid obligates the buyer to collect the machine by 05.08.2025! No reserve price – guaranteed sale to the highest bidder! Lathe with main and sub-spindle – unrefurbished spare spindle included in delivery! TECHNICAL DETAILS Travel X-axis travel: 290 mm Z-axis travel: 560 mm Ncsdpjw A Hpdefx Ab Iol W-axis travel: 640 mm Y-axis travel: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. turning diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feed Rates X-axis feed: 24 m/min Z-axis feed: 30 m/min W-axis feed: 30 m/min Y-axis feed: 12 m/min Turret Turret stations: 12 Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Indexing time: 0.16 s Sub-Spindle Sub-spindle max. speed: 6,000 rpm Sub-spindle torque: 70 Nm MACHINE DETAILS Electrical connection: 66 kVA / 95 A / 400 V Air supply: 7 bar / 150 l/min Weight: 7,000 kg Operating Hours Power-on hours: 60,496 h Spindle running hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various channel guides Chip conveyor Tool setting arm (tool setter) Transformer Coolant unit Coolant tank Fixed and driven tool holders Spare main spindle (unrefurbished) Various clamping heads, size 65 Documentation (circuit diagrams, operator manual, etc.) Note: The main spindle produces noise. An unrefurbished spare main spindle is included in the scope of delivery.

Condition: used, Hurco Hawk Model 5D, with Dynapath Delta CNC control, 70-3800 RPM, 1000mm x 330mm table. Bt 40 Spindle. Immaculate condition from University. Nedpfx Aoya Hrrjb Iscl

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 11 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,300 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available ex stock. Transport from warehouse in the Netherlands or Italy to be arranged by the buyer. Further machine sizes available. => Installation and commissioning available upon request. Including auger chip conveyor and all software options such as: • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touchscreen monitor • 120 GB solid state drive • 4 GB RAM • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop Optional accessories: IKZ – Through-spindle coolant 20 bar, with rotary union and auxiliary tank with filter Programmable air cooling via spindle IKZ pre-installation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ pre-installation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis Model TDE-MV-200 complete with controller and motors LCM 4th axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors, and cables 4th axis electrical package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-200 (200mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-250 (250mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics TS-A135 tailstock for M-170 rotary table Milltronics TS-A160 tailstock for M-200 rotary table Milltronics TS-B185 tailstock for M-250 rotary table 180 mm three-jaw chuck with adapter flange (only for Milltronics M-170 and M-200 rotary tables) 230 mm three-jaw chuck with adapter flange (only for Milltronics M-250 rotary table) Tsudakoma 4th axis Model RNE-160R with motor (4th axis electrical package must also be ordered) Nedpfx Abexwyzyo Iocl Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis Model RNE-200R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool setting probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool setting probe with optical signal transmission and macros Renishaw NC4-F300 non-contact tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block with 4 units Programming manual in paper format Machine manual in paper format