Used Mazak Cnc Lathe for sale (380)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 16,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,376 mm, table load: 2,500 kg, overall weight: 16,300 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, tool weight: 8,000 g, product length (max.): 5,480 mm, number of axes: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table top: 140 mm • Max. distance spindle nose to table top: 860 mm • Work spindle • tool holder HSK63 • Feed rates • Rapid traverse speed X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • With adjacent positions occupied: 80 mm • With adjacent positions free: 130 mm • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air flow rate: 260 l/min • Tank capacity: 500 L Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mounting bracket for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetting devices Fodpfx Agjx Nkp Us Topd • Spare parts: • Y-axis motor for tool magazine • Linear axis shifter motor • Rotary axis shifter motor • Cylinder for swivel unit

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 4,000 rpm, spindle motor power: 18,500 W, overall weight: 5,000 kg, controller manufacturer: MAZATROL, controller model: T Plus, This Mazak SQT 250M was manufactured in 1998. It is a horizontal turning machine, ideal for precision machining tasks. Contact us for more information about this machine. Additional equipment • Parts Catcher and Parts Counter Machine Benefits Technical Machine Benefits • Rapid feedrates: 30 m/min • Chuck size: 250 mm kitagawa chuck b-210a615 • Bar capacity: 64 mm • Features: complete with standard and live tooling • C axis & milling, c axis: 0. 001° Extra Information Machine still under power Fpjdpfx Ageyaix Ie Ted

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 4,500 rpm, controller manufacturer: MAZATROL, controller model: 640T NEXUS, number of axes: 2, This 2-axis Mazak QTN 250M 1000L was manufactured in 2004, offering reliable performance as a horizontal turning machine. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250M 1000L machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Fjdpfxeyaln So Ag Tepd • Maximum machinable diameter: 380 mm • Maximum workable length: 600 mm • Bar capacity: 76 mm • Self-centering dimensions (main spindle): 250 mm • Spindle nose (main spindle): asa 8 • Spindle hole (main spindle): 88 mm • Tail stock race: 1000 mm cone: 4 cm • Cooling tank capacity: 300 liters Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 345 mm, travel distance Z-axis: 462 mm, controller manufacturer: MAZATROL, controller model: Smooth G, number of axes: 2, This Mazak Mega Turn 500 was manufactured in 2017. A robust vertical turning machine featuring a Mazatrol Smooth G control unit, it offers a maximum workable diameter of 500 mm and includes a 12-position turret plus a 10-station ATC with Capto C6. Additional features include a high-pressure coolant system at 15 bar and an automatic tool presetter. Contact us for more information about this machine. Fedpfxoyalppj Ag Topd Additional equipment • High Pressure Coolant System: 15 bar • Automatic Tool Presetter: Yes Machine Benefits Technical Machine Benefits • Maximum workable diameter: 500 mm • Turret configuration: 12-position turret + 10-station atc with capto c6 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function • High surface smoothing on contours (High Smoothing Control) • Mazatrol-to-ISO program conversion Fedpfxoyhcvis Ag Tjpd • Program memory expansion • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN-510C NEXUS was manufactured in 2004. It features an X-axis travel of 1,050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer with 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-510C NEXUS vertical machining centre we have for sale. Contact us for further details. • Tool changer: 30 positions • Coolant system: Through-spindle Fpsdpfjylxy Esx Ag Tsd • CE documentation: Yes • Control unit: FUSION 640 Additional equipment • High-pressure coolant system • Chip conveyor Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, number of axes: 3, This 3-axis Mazak VTC-20C was manufactured in 1999. It features a vertical machining center with a table load capacity of 1,000 kg and dimensions of 510 mm by 2,000 mm. The machine offers X, Y, and Z-axis travels of 1,660 mm, 510 mm, and 510 mm respectively. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-20C machine we have for sale. Contact us for more information. • Capacity: • Drilling capacity in S45 (JIS): 25 mm • Milling capacity in S45 (JIS): 165 cm³/min • Tapping capacity in S45 (JIS): M24 × P3 • Table: • Height from floor: 750 mm • Number of tables: 1 • Table length: 510 mm • Table width: 2,000 mm • T-slots (number): 5 Fpsdpfxjycii Es Ag Tjd • T-slot reference width: 18 mm • T-slot distance (pitch): 100 mm • Distances: • Spindle nose to table top: 180–690 mm • Spindle center to column: 550 mm

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: PC-FUSION-CNC, total height: 2,650 mm, overall weight: 11,500 kg, This 4-axis Mazak FH-4800 horizontal machining center was manufactured in 2002. It offers robust and precise machining capabilities, ideal for a variety of applications. Consider the opportunity to buy this Mazak FH-4800 horizontal machining center. Contact us for more information about this machine. Additional equipment • Tool Capacity: 64 positions • Maximum Tool Diameter: 150 mm /Maximum Tool Length: 375 mm/ Maximum Tool Weight: 12 kg Machine Benefits Fpsdpfjx D Ihusx Ag Tod Technical Machine Benefits • Rapid traverse rate (x/y/z): 50 m/min • Pallet size: 400 mm x 400 mm • Number of pallets: 2 / pallet indexing: 1° increments / maximum load capacity per pallet: 400 kg • Spindle taper: iso 40/ spindle speed range: 0 – 12000 rpm • Spindle motor power: 22 kw (30 min)/ 15 kw (20 min) /11 kw (continuous) • Distance from spindle center to pallet top: 50 – 660 mm Extra Information In the last 3 years, they changed the spindle, servo, encoder, motor, cover.. More than 40k to keep the machine in good condition. Dimensions Machine Depth 4200 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,522 h, controller manufacturer: MAZATROL, controller model: Matrix, total height: 3,400 mm, overall weight: 17,000 kg, This 5 axis Mazak Variaxis 630-5X was manufactured in 2007. A universal machining centre featuring a 2-pallet changer, 80-tool magazine, and a Renishaw probe. It supports a 70 bar internal cooling system, enhancing operational efficiency. Ideal for those looking to enhance their machining capabilities. Contact us for more information about this machine. Fodpfsx D Ewajx Ag Tspd • Loading method: Forklift/Crane • Known defects: Normal signs of use and wear • 80-tool magazine • Renishaw probe • 70 bar internal cooling Additional equipment • 2-pallet changer Dimensions Machine Depth 5800 mm

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,545 mm, travel distance Z-axis: 25 mm, overall weight: 14,800 kg, table load: 930 kg, number of axes: 3, This 3-axis Mazak Hyper Gear 510 was manufactured in 2005. It features an X-Y-Z axis stroke of 3070 × 1545 × 100 mm and a maximum workpiece size of 3050 × 1525 × 25 mm. With a rated laser output of 4000 W, this CO₂ laser cutting machine is designed for precision cutting. If you are looking to get high-quality cutting capabilities, consider the Mazak Hyper Gear 510 machine we have for sale. Contact us for further details. • Max. workpiece size: 3050 × 1525 × 25 mm • Rated laser output: 4000 W Fpedpfx Agoymn Dve Ted • CO₂ laser model: YB-L400A 8M (5E) • NC unit: Mazatrol Preview

Condition: ready for operation (used), Year of construction: 2015, number of axes: 5, This 5-axis Mazak VTC 800/30SR was manufactured in 2015, featuring a 600mm rotary table (Nikken CNC601MA), 70 bar high-pressure cooling, and a 48-tool magazine. It includes Renishaw probe preparation, RMP60Q touch probe, and CAD/CAM software TOPSOLID 7.18 with a floating license. Consider the opportunity to buy this Mazak VTC 800/30SR vertical machining centre. Contact us for more information about this machine. Fjdpfx Aox Imq Sjg Tepd • 70 bar high-pressure cooling • 48-tool magazine • Center partition Additional equipment • 600 mm rotary table (Nikken CNC601MA) • Renishaw probe preparation • RMP60Q touch probe • CAD/CAM software with floating license TOPSOLID 7.18 • Post-processor for the specified machine

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: MAZATROL, controller model: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6" hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine. Fpjdpfx Aoyalpieg Tod Machine Benefits Qualitative Machine Benefits • There are 2 units available Technical Machine Benefits • Chuck type: 6" hydraulic chuck with bar capacity max /spindle speed: 4000 rpm max /power: 30 kw / 22 kw continuous/ max torque: 500 nm /spindle nose: a2-8/ acceleration time: 5. 1 seconds • Type: 6" hydraulic chuck max speed: 4000 rpm max power: 26 kw / 22 kw continuous /max torque: 724 nm /spindle nose: a2-8 /acceleration time: 2. 7 seconds • Max speed: up to 20000 rpm (optional) /max power: 18. 5 kw/ max torque: 119 nm/ taper type: km63, capto c6, bt40 • X-axis: 410 mm/ y-axis: ±70 mm (total 140 mm) /z-axis: 805 mm/ b-axis (milling head): 210° rotation/ c-axis (spindle): 0. 0001° resolution (full contouring) • Max turning diameter: approx. ø545 mm/ max turning length: approx. 600 mm • Tool capacity: 20 tools standard, expandable to 120 /changer type: high-speed cam-driven system • Heavy-duty construction with linear guides “done in one” multi-tasking concept for single-setup machining/ cnc control: mazatrol matrix with 3d simulation/ intelligent thermal shield for automatic thermal compensation

Condition: ready for operation (used), Year of construction: 2016, laser power: 6,000 W, overall weight: 15,500 kg, number of axes: 3, This 3-axis Mazak OPT IPLEX 3015 Fiber II was manufactured in 2016. It features a 6 kW fiber laser, Mazatrol Preview 3 control, and a machining size of 3050 × 1525 mm. Equipped with advanced features like auto nozzle changing, auto focus positioning, and intelligent monitoring functions, it ensures precise and efficient operations. Consider the opportunity to buy this Mazak OPT IPLEX 3015 Fiber II fiber laser cutting machine. Contact us for more information. • Working hours: 53,000 h • Control/Controller: MAZATROL Preview 3 • Mazak Control Box: Included • Machining size: 3050 × 1525 mm • Resonator: IPG • Torch: Multi-Control Torch 2.0 (upgraded) • Intelligent Setup Function (ISF) • Auto nozzle changing (8 holders) • Auto nozzle cleaning • Auto focus positioning • Beam diameter change function Fsdox I Sm Espfx Ag Topd • Intelligent Monitoring Function (IMF) • Pierce detection • Burn detection • Plasma detection • Protective window sensor • Condensing lens sensor • Elementary diagram: DD628101002 • Rated capacity: 57 kVA • Power supply: 3AC 380 V, 50/60 Hz • Auxiliary voltages: AC 100 V / DC 24 V Additional equipment • Chip conveyor: Yes • Dust collector: Donaldson • Chiller: IPG • Workpiece lifter: Yes

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 22,000 W, number of axes: 3, This 3-axis Mazak Multiplex 6200 was manufactured in 1999 and features dual spindles with a maximum speed of 5,000 rpm and a drive power of 22/15 kW each. It includes an ABB robot and turrets on both the right and left with 12 tools each. Rapid traverse rates are 30.5 m/min for the X-axis and 33 m/min for the Z-axis. If you are looking to get high-quality turning capabilities consider the Mazak Multiplex 6200 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Right and left turrets: 12 tools each • Axes: 3; including abb robot Fpedpfx Ajx Nr S Dsg Tjd • Main motor: 200 v

Condition: ready for operation (used), Year of construction: 2000, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information. Additional equipment • chip conveyor is included Fsdsyaaw Uspfx Ag Tspd Machine Benefits Qualitative Machine Benefits • 2019: new spindle motor and spindle, recirculating ball screws in x and y axes • 2024: new recirculating ball screw in x axis due to a material defect. Technical Machine Benefits • Rapid traverse: 36 m/min • Workpiece: 24-axis changer • Tools: coolant pump: 5-bar • Tools: internal and external cooling Extra Information Machine still under power

Year of construction: 2023, condition: ready for operation (used), number of axes: 5, This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Additional equipment • 36 tool change • Includes tailstock function Fedjyaqvujpfx Ag Topd Machine Benefits Technical Machine Benefits • The machine has a 36 mm tool • A 12 to 15 bar flushing system • Tailstock function • Cooling water cooling • Bar puller function • Milling spindle 12000 rpm • Main and counter spindle • 1 degree swivel b-axis Extra Information OPM probe tool measurement Optional: Capto C6 tool holders

Condition: excellent (used), Year of construction: 2006, For sale: A reliable vertical CNC machining center Yamazaki Mazak Nexus VCN-510C – a high-end production machine from the renowned Japanese manufacturer MAZAK, known for its precision, durability, and stable operation in industrial manufacturing environments. The VCN-510C is ideally suited for machining steel, aluminum, and workpieces requiring high accuracy and repeatability. Thanks to the MAZATROL 640M control, the machine offers intuitive operation and rapid production setup. Technical specifications: Year of manufacture: 2006 Control: MAZATROL 640M X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm T-slot table Automatic tool changer (ATC) Central lubrication Electrical cabinet Weight: 7,100 kg Fodpfx Aoyha Ivog Tjpd Low operating hours

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 533143283, travel distance X-axis: 2,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller manufacturer: MAZATROL, workpiece height (max.): 750 mm, workpiece weight (max.): 3,000 kg, table width: 800 mm, table length: 2,240 mm, overall weight: 14,000 kg, Mazak MTV-815/80 • Table size: 2,240 mm × 810 mm • Maximum table/workpiece load: 3,000 kg evenly distributed • Maximum spindle speed: 40 - 6,000 rpm Fpodpfjx E Twaex Ag Tod • Spindle taper: SK 50 • Spindle power/torque (standard): e.g. 18.5 kW and 759 N·m at 40% duty cycle / 30 min rating; for high-power version: 26 kW and 1,067 N·m. All information provided without guarantee

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro b-axis 240 ° c-axis 360 ° number of spindle speeds 4.000 U/min spindle bore 88 mm Fedpfox Avr Sox Ag Tspd milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: used, Year of construction: 1991, x-travel 6200 mm y-travel 1500 mm z-travel 508 mm Control Mazatrol type M 32 workpiece height 708 mm Tool changer 60 spindle taper ISO 50 table surface area 6200x750 mm Fjdpfeyqvdrjx Ag Tspd The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1997, x-travel 3200 mm y-travel 1400 mm z-travel 508 mm table surface area 3000x1250 mm column daylight 1500 mm turning speeds 35-5000 U/min spindle taper ISO 50 control Mazatron M Plus Table load 5000 kg Tool changer 30 The tech. Data are manufacturer or operator information and therefore non- Fpjdpfoyqvaaox Ag Tsd binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1996, x-travel 1040 mm y-travel 510 mm z-travel 640 mm control Mazatrol type M Plus Tool changer 24 Pos. weight of the machine ca. 5,5 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Fodpfx Agjyqr Uys Tspd Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2005, Make: MAZAK Type of machine: HCN-6000 Year of manufacture: 2005 Control system: Mazatrol 640M Machine's weight: 16.000 kg Tool holder: SK 50 Fpjdoyc Sbkepfx Ag Tod x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Speed range: 10.000 U/min max. Table load: 1.000 kg Table dimensions: 500 × 500 mm Number of tools in the magazine: 60 Plätze

Condition: ready for operation (used), Year of construction: 2004, Make: MAZAK Type of machine: INTEGREX 300-3ST Fpodpfx Asyh I Rveg Tjd Year of manufacture: 2004 Control system: Mazatrol 640 CNC-Steuerung Machine's weight: 14.200 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: ready for operation (used), Year of construction: 2005, Make: MAZAK Type of machine: PFH-5800 Year of manufacture: 2005 Control system: Mazatrol 640M Fsdpfx Asyc Sbdsg Tepd Machine's weight: 16.000 kg Tool holder: SK 50 x-travel: 900 mm y-travel: 760 mm z-travel: 800 mm Speed range: 10.000 U/min max. Table load: 1.000 kg Table dimensions: 500 × 500 mm Number of tools in the magazine: 80 Plätze