Used Mazak Machining Center for sale (325)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software Iedpfx Agsz Ipzue Aetn • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000. It features an X-axis stroke of 1120 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 510 mm. The machine has a spindle speed of 10,000 rpm and uses a CAT BT 40 tool shank. If you are looking to get high-quality machining capabilities, consider the Mazak VTC-200B vertical machining centre we have for sale. Contact us for further details. • Notes/condition: • Screen defective; NC module requires repair • New X-axis installed 3 years ago • All relays replaced 3 years ago • 2025: New spindle motor installed (worth €6,900 excl. VAT) • 2022: New power supply (worth €3,900) Technical Specification Taper Size BT 40 Iedpjz R A Tkofx Ag Astn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Portal loader Flex GL150F - Pallet conveyor Itodpfxez Nhc Uj Ag Aon - D3 hand, 3-jaw gripper - max. 2 x 15 kg - Diameter: 20-200 mm - Length: max. 120 mm Chip conveyor Mayfran ConSep 2000 Drum filter High-pressure pump 50 bar Coolant temperature control 5-axis simultaneous machining Flash Tool function Preparation for Mazak Monitoring B (Renishaw) Synchronized thread cutting Cylinder interpolation Full C-axis counter spindle

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Iedsz Ndu Eepfx Ag Astn Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Iedpfxoyh N Aae Ag Aetn Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Condition: excellent (used), Year of construction: 2010, Type: Horizontal CNC: Yes MAZAK DUAL TURN 20 CNC TWIN-SPINDLE TURNING CENTER Manufacturer: Yamazaki Mazak Corporation Model: DUAL TURN 20 Year of manufacture: 2010 Made in: Japan Machine type: CNC Twin-Spindle Turning Center Spindles: 2 Turrets: 2 × 12 positions Total tool positions: 24 Chuck size: 8” Spindle nose: A2-6 Spindle bore: 61 mm Maximum spindle speed: up to 4,750–5,000 rpm, depending on configuration Maximum turning diameter: 320 mm Maximum machining length: 150 mm X-axis travel: 230 mm Z-axis travel: 500 mm Ijdpfx Agsz Hdvqe Ajtn Spindle motor: approx. 15 kW / 20 HP CNC control: MAZAK CNC Automatic workpiece transfer: Yes Main power supply: 200 V / 3-phase / 50–60 Hz Rated capacity: 61 kVA Main motor maximum current: 94 A Country of origin: Japan Description: MAZAK DUAL TURN 20 is a twin-spindle, twin-turret CNC turning center designed for high-productivity and serial production. The machine allows two-sided machining with automatic workpiece transfer between the spindles, making it suitable for efficient production of precision turned components.

Condition: good (used), Year of construction: 2005, Mazak Integrex 300 - III turning/milling center, year of manufacture 2005, CNC control 640 MT, travel X/Y/Z 630/230/1,585 mm, B axis NC swiveling head -30°/+195°, tool magazine with 80 positions Capto, Isdpjyzfr Ijfx Ag Aetn main spindle 26 kW, C axis 0.001°, tailstock MK 5, high-pressure coolant system 70 bar with filtration unit, Tooleye, 5-axis simultaneous machining package, Mazak Monitoring System, chip conveyor,

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Ijdpfxozr U Aue Ag Aotn Counter Spindle Yes

Year of construction: 1989, condition: excellent (used), For sale: CNC lathe Mazak QuickTurn 20N. The lathe is in very good condition. Equipment includes: MAZATROL T-2, MAZATROL CAM-T-2 control system. Iedez Scfkopfx Ag Astn

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Iodpfx Agjvrxd He Aotn Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Year of construction: 1996, condition: good (used), Used CNC machining center, MAZAK, equipped with: - MAZATROL M32B control system - 24-tool magazine - Chip conveyor Itodpfjhl Dbdsx Ag Asn - Lighting - Clamping system (two machine vises and hydraulic unit) - Documentation Travel ranges X/Y/Z: 1120/510/510 Spindle speed: 40-7000 RPM Spindle taper: BT 40 Further technical details can be found in the PDF document. Total machining time: 7,800 hours Technical data and dimensions: Subject to change.

Condition: used, Year of construction: 2012, Mazak VTC-820/30 – specification Overview - Brand: Mazak - Model: VTC-820/30 - Year model: 2012 - Location: Eskilstuna Control system - Mazatrol Matrix Nexus Movements Isdjz N An Espfx Ag Aetn - Number of axis: 4 (X, Y, Z + 4th shaft) - X-axis: 3.000 mm - Y-axis: 820 mm - Z-axis: 720 mm - Fast transport: 50 m/min - Distance spindle nose to table: 140–860 mm Spindle and tool - Spindle effect: 22 kW - Spindle RPM: 12,000 rpm - Spindelkona: CAT 40 - Tool changer: 30 positions - Cutting fluid through the spindle: 15 bar Table - Table size: 3,500 × 820 mm - Max table load: 2,500 kg - T-slots: 7 pcs, 18 mm, pitch 100 mm 4th axle - Round Feeding Table Mazak DS50C-R1-Z, Ø 500 mm, with Roller Gear Cam - Vertical mounting on angle shelf Mazak MAZ 80090X Dimensions and weight - Machine depth: 3,700 mm - Machine height: 3,050 mm - Machine weight: 16,100 kg Equipment - Renishaw tool breakage control TRS2 - Shavings conveyor to the left, lamella conveyor with timer relay - Cutting fluid through the spindle, 15 bar - Manual rinsing nozzle - Portable pulse generator (handheld) for shoulder movements - Automatic power shutdown at end of program - 3 extra M-functions (1 pair) - Robot interface, Ethernet/IP slave - Automatic doors

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, MAZAK QUICK TURN NEXUS 200-II 500U Max. machining diameter: 350 mm Max. machining length: 511 mm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: Ijdpfxoz Ea Aks Ag Aotn - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-208, diameter 210 mm - Tool Eye - Automatic parts catcher - NC tailstock - Reinforced coolant pump - CROMAR chip conveyor - 1 set of tool holders

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 2,823 mm, total width: 3,160 mm, table load: 1,500 kg, overall weight: 8,900 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, tool weight: 20,000 g, product length (max.): 3,436 mm, number of axes: 4, This 4-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details. • Milling capacity in S45 (JIS): 634 cm³/min • Drilling capacity in S45 (JIS): 50 mm • Table Size: 1,300 mm x 550 mm • Table Configuration: 5 T-slots, 100 mm distance, 18 mm reference groove Isdpfxey I Amvj Ag Aotn • Table Height from Floor: 800 mm • Spindle Nose to Table: 200 mm - 760 mm • Spindle Center to Column: 525 mm • Rapid Traverse (X/Y): 26 m/min • Rapid Traverse (Z): 20 m/min • Feed Rate (X/Y/Z): 8 m/min • Min Spindle Speed: 25 rpm • Max Torque: 758 Nm • Max Tool Diameter: 125 mm (adjacent occupied) / 260 mm (adjacent free) • Max Tool Length: 400 mm • Chip-to-Chip Time: 5.5 s • Coolant Tank Capacity: 200 L • Coolant Pump Power: 0.75 kW • Connected Load (30 min/100%): 41.2 KVA / 36.2 KVA • Compressed Air Supply: 5 kg/cm², 200 L/min Additional equipment • Extraction System: Donaldson Torit DCE • Chip Conveyor: Mayfran

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,840 mm, total width: 1,900 mm, overall weight: 7,100 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2020. It features a maximum spindle speed of 18,000 rpm and a rapid traverse rate of 30,000 mm/min. The machine includes a tool magazine capacity of 30 tools and a robust table size of 500 x 400 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • CNC control: MAZATROL SmoothX with 19-inch colour touchscreenWorking capacity and travels • A-axis tilt: -120° to +30° • C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis index time: 0.6 s per 90° • C-axis index time: 0.55 s per 90° / 1.05 s per 180°Table and clearances • Tilting/rotary table (A/C axes) • Table size: 500 × 400 mm • Table with T-slots (as per final configuration) • Spindle nose to table surface (table horizontal): 50–560 mm • Spindle nose to table centre (table vertical): 40–550 mmSpindle • Spindle chiller with 16 L cooling oil tank • Programmable spindle orientation in 1° incrementsTool magazine and ATC • ATC with recovery function; digital magazine display and external operating panel • Tool selection: fixed addresses with automatic shortest-path selection • Pull stud: Yamazaki ANSI • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm • Max tool diameter with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 sMeasuring and probing • Renishaw RMP600 radio workpiece probe • MAZA-CHECK system • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement • Absolute positioning systemCoolant and chip management • Through-tool high-pressure coolant: approx. 15 kgf/cm² (≈14.7 bar), approx. 35 L/min • Coolant tank: 300 L • Coolant washdown system and manual washdown gun • Cooling for X/Y/Z ball screws • Workpiece air blastControl and software • MAZATROL SmoothX CNC • EIA/ISO programming package • Simultaneous 5-axis control • Additional 5-axis machining package for SmoothX • 3D coordinate rotation • Smooth synchronous tapping • G00 Slope Constant (rapid optimization) • Smooth restart • Tilted machining plane • Inverse Time Feed • Extended work offsets: 300 pairs Isdpsz Iqgrefx Ag Astn • Variable macros: 600 variables • High-speed machining and smoothing • Geometric compensation for rotary axes • Interfaces: USB, LAN, SD cardConstruction, safety, and other features • Electronic handwheel • Three-colour signal tower • Automatic machine power on/off and warm-up • Roller linear guideways • Full enclosure with top cover; interlocked operator door • Work area lighting • Intelligent Safety Shield (ISS) • CE marking Additional equipment • CROWTHER right-side hinged-belt chip conveyor (for steel machining) • GX500 mist extraction unit with extraction preparation • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked Itsdpoz Eavwsfx Ag Aon • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 511 mm, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, MAZAK QUICK TURN NEXUS 200 MS Year of manufacture: 2004 Control system: Mazatrol 640T Nexus Machine type: CNC turning machine Configuration: Main and counter spindle, C-axis, driven tools Working area: Max. swing diameter: 675 mm Max. turning diameter: 380 mm Max. turning length: 511 mm Max. bar diameter: 65 mm Main spindle: Speed range: 35 – 5,000 rpm Drive power: 26 kW Continuous power: 22 kW Max. torque: 350 Nm Spindle bore: 76 mm Spindle nose: A2-6 C-axis resolution: 0.001° Itedpfez Ipvxex Ag Aon Counter spindle: Speed range: 35 – 6,000 rpm Drive power: 10 kW Continuous power: 7.5 kW Max. torque: 75 Nm C-axis resolution: 0.001° Tool turret: Tool positions: 12 Driven tools: available Speed of driven tools: 25 – 4,500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel distances: X-axis: 230 mm Z-axis: 575 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 33 m/min Machine data: Total connected load: approx. 46.2 kVA Machine weight: approx. 5,100 kg Dimensions L x W x H: approx. 2,800 x 1,800 x 1,850 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 157626, Manufacturer: Mazak Model: Integrex 200-2SY Controller: Mazatrol PC Fusion CNC 640 Robot NOT included Max. Machining diameter: 540 mm Max. Machining length: 1018 mm Itedevlxf Depfx Ag Aon Spindlebore: 51 mm Spindlepower: 22 kW 5000 rpm Travel: X = 530 mm Z = 1065 mm Machine weight: 7800 kg. Machine dimensions: L=5200 x W=2500 x H=2750 mm

Condition: used, Year of construction: 1996, x-travel 1040 mm y-travel 510 mm z-travel 640 mm control Mazatrol type M Plus Tool changer 24 Pos. weight of the machine ca. 5,5 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Ijdpfxoyqr Uyj Ag Ajtn About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, For sale: Mazak EMC 3015 automatic sheet metal loading and unloading system, Extensible Manufacturing Cell. A new one costs approximately €130,000. The system is practically new. Used with a machine with 2,000 hours of operation, and only occasionally. Manufactured in 2016. Itedsyh N Rdspfx Ag Ajn High Column model, compatible with the following Mazak machines: Optiplex, Optiplex Nexus, SpaceGear, Optiplex NEO Maximum sheet dimensions: 3000x1500mm Maximum sheet weight: 900kg. Unloading station: max. 2000kg. Sheet metal loading queue management system.

Year of construction: 2011, operating hours: 45,000 h, condition: good (used), functionality: fully functional, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 805 mm, spindle diameter: 150 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, MAZAK INTEGREX 100 IV ST multitasking center Year 2011 Control unit: Matrix Maximum workable length: 753 mm Maximum workable diameter: 545 mm Bar diameter: 51 mm Main spindle diameter: 200 mm, 2-jaw chuck Main spindle power and speed: 11 KW, 5000 rpm Itsdpfxjzz Rxwj Ag Ajn C-axis: 360° Counter-spindle diameter: 200 mm, 2-jaw chuck, self-centering Counter-spindle power and speed: 11 KW, 5000 rpm C-axis on counter-spindle: 555 X-axis travel: 410 Y-axis travel: 140 Z-axis travel: 805 B-axis travel: 225° Milling spindle power: 5.5 KW Milling spindle speed: 12,000 rpm Spindle mounting: CAPTO C6 Maximum tool storage capacity: 40 tools Lower turret: 9 positions, CAPTO High-pressure system through the spindle: 20 BAR Chip conveyor: belt type Automatic door Robot interface

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Chuck: Kitagawa BB208 (210mm) bar passage: 65 mm secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface Itjdek D Ez Ispfx Ag Ajn New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)

Condition: excellent (used), Year of construction: 2011, Type: Horizontal CNC: Yes MAZAK QUICK TURN SMART 100 S Machine type: CNC Horizontal Turning Machine Manufacturer: Yamazaki Mazak Model: QUICK TURN SMART 100 S Year of manufacture: 2011 Country of manufacture: Singapore CNC control: MAZATROL SMART Number of axes: 2 Chuck size: 6” Maximum spindle speed: 6,000 rpm Maximum turning diameter: 280 mm Maximum machining length: 310 mm Maximum swing over bed: 580 mm Bar capacity: approx. 51 mm X-axis travel: 200 mm Z-axis travel: 340 mm Turret: 12-station Tailstock: Yes Spindle nose: A2-5 Spindle bore: approx. 51 mm Ijdpfx Agjz Hdx Se Aetn Machine weight: 3,400 kg DESCRIPTION : MAZAK QUICK TURN SMART 100 S CNC lathe, manufactured in 2011. Equipped with MAZATROL SMART CNC control, 2-axis configuration, 6” chuck, 12-station turret and spindle speed up to 6,000 rpm. Maximum turning diameter 280 mm and machining length 310 mm. Machine weight: 3,400 kg.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Mazak FH4800 was manufactured in 2004. It features a maximum spindle speed of 12,000 rpm and impressive travels of 560 mm in the X-axis, 610 mm in the Y-axis, and 560 mm in the Z-axis. The machine is equipped with a 40-position automatic tool changer and includes a Fastems 8-station pallet loading system. If you are looking to get high-quality machining capabilities, consider the Mazak FH4800 horizontal machining centre we have for sale. Two units are available: one with the Fastems 8-station pallet loading system and one in standard configuration without the pallet system. A special package price is available for the purchase of both units. Please contact us for further details. • Indexing: 1° • Machine type/condition: Toolroom machine • Operating hours: Low Additional equipment • Fastems 8-station pallet loading system (automation) • Renishaw probing system • Tooling included • Manuals included Availability Two MAZAK FH4800 units are available. • Unit 1: The machine shown in this listing and corresponding to the current advertised price. It is equipped with a Fastems 8-station pallet loading system. • Unit 2: A second MAZAK FH4800 is also available in standard configuration, without the Fastems 8-station pallet loading system, at a lower price.A special package offer is available for customers interested in purchasing both units together. Technical Specification Itodpfez Ea Hvex Ag Aen Taper Size BT 40

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant BT40 Tooling Mazatrol 640M control 30 Tool magazine Itedpfxjv Txpls Ag Aon 12,000 rpm main spindle full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.