Used Mazak Milling Machine for sale (331)

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool Fgsdpfxsx Rkvqo Akmjh ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Fodpfx Aexf Iklskmsgh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Parts receiver Interface for bar feeders Chip conveyor Fgjdpez Nhhdjfx Akmsh

Condition: good (used), Year of construction: 2004, functionality: fully functional, Mazak vertical machining center Model: VTC 300 C Year: 2004 X-axis travel: 1740 Y-axis travel: 760 Z-axis travel: 660 Fgjdpfx Aksz Akpxemjh Table size: 2000 x 760 mm Spindle connection: ISO 40 Chip conveyor: Yes, belt type High-pressure system through the spindle: 15 BAR Number of tools (ATC magazine): 30 Rapid traverse rate, X-axis: 36,000 m/min Rapid traverse rate, Z-axis: 36,000 m/min Control unit: Mazatrol 640M Spindle speed (main spindle): 12,000 rpm Center partition: Yes

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system Fgsdpfxoz Ipzus Akmsh • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 Fodpfx Aozr Uudskmogh - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table load: 300 kg, overall weight: 11,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details. • A: -120° / +30° • C: 360°Table • Dimensions: 500 × 400 mm Fedszpygaopfx Akmsgh • Number of tables/pallets: 2 • Spindle nose to horizontal table: 190–650 mm • Spindle nose to vertical table: 140–600 mmSpindle • Max torque: 252 NmTool magazine / ATC • Automatic tool changer: YesControl and software functions • Automatic pecking cycle with load detection • Synchronized tapping • EIA Dynamic Compensation 2 • Two additional M-code functions • G00 slope constant • High-speed function • MAZACC-3D high-speed software package • Shape compensation for rotary axes Additional equipment • Pallet changer (two pallets/tables) • Belt-type chip conveyor • Chip conveyor preparation with chip pan • High-pressure coolant through spindle system (stated as 15 kg)

Condition: good (used), Year of construction: 2002, functionality: fully functional, MAZAK Vertical Machining Center VC-NEXUS 510 Year 2002 X-axis travel: 1020 Y-axis travel: 510 Z-axis travel: 510 Control unit: FUSION 640 Fgodpfxez Akrte Akmsh Spindle speed: 12,000 rpm Coolant pressure: 15 bar Spindle connection: ISO 40 Table width: 550 Table length: 1300 Number of tools (ATC): 30

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Fgsdpfx Aju U R E Aekmsh

Condition: good (used), Year of construction: 1998, Ref. -No.: 10661 Manufacturer: MAZAK Type: SQT 200 MS Year of construction: 1998 Type of control: CNC Control: Mazatrol Fusion 640T Fgjdjzw Txljpfx Akmeh Storage location: Halberstadt Country of origin: Japan Turning Speeds: 6000 RPM Swing Dia.: 525 mm Turning Diameter: 300 mm Turning Length: 500 mm Spindle Speeds: 5000 RPM Spindle Bore: 51 mm Spindle power: 18,5 kW Turret places: 1 Pcs Tool places: 12 Machine length: 3023 mm Machine width: 1700 mm Machine Height: 1999 mm Weight Of The Machine Ca.: 5,3 t Pole work up to max.: 51 mm Further information: - The Mazak SQT 200 MS is built for durability and reliability - Its design ensures stability and precision during machining, even at high speeds or during long production runs. - This model features powered tools and C-axis capabilities - This model is typically equipped with the Mazatrol Fusion 640T CNC control. The machine can be viewed while powered on by appointment.

Condition: excellent (used), Year of construction: 2010, Type: Horizontal Fgedpsz Hdvqjfx Akmoh CNC: Yes MAZAK DUAL TURN 20 CNC TWIN-SPINDLE TURNING CENTER Manufacturer: Yamazaki Mazak Corporation Model: DUAL TURN 20 Year of manufacture: 2010 Made in: Japan Machine type: CNC Twin-Spindle Turning Center Spindles: 2 Turrets: 2 × 12 positions Total tool positions: 24 Chuck size: 8” Spindle nose: A2-6 Spindle bore: 61 mm Maximum spindle speed: up to 4,750–5,000 rpm, depending on configuration Maximum turning diameter: 320 mm Maximum machining length: 150 mm X-axis travel: 230 mm Z-axis travel: 500 mm Spindle motor: approx. 15 kW / 20 HP CNC control: MAZAK CNC Automatic workpiece transfer: Yes Main power supply: 200 V / 3-phase / 50–60 Hz Rated capacity: 61 kVA Main motor maximum current: 94 A Country of origin: Japan Description: MAZAK DUAL TURN 20 is a twin-spindle, twin-turret CNC turning center designed for high-productivity and serial production. The machine allows two-sided machining with automatic workpiece transfer between the spindles, making it suitable for efficient production of precision turned components.

Condition: excellent (used), Year of construction: 2015, MAZAK QUICK TURN SMART 250ML 1000U Max. turning diameter: 360 mm Max. machining length: 1,024 mm Max. milling speed: 4,500 rpm Fgedpfxszy Um Ao Akmsh Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm Machine is equipped with: - CNC control: Mazatrol Smart - KITAGAWA 3-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Interface for bar loader magazine - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 2011, functionality: fully functional, Horizontal machining center MAZAK Model: HCN 6000 Year: 2011 Control unit: MAZATROL MATRIX 2 X-axis travel: 800 Y-axis travel: 800 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece size (length x width x height): D.900 x H.1000 Fgsdpsz Apacefx Akmoh Table surface: Tapped holes Maximum workpiece weight: 1000 Spindle speed: 7000 Spindle connection: ISO 50 Torque (continuous / 10 min): 680 Nm Rapid traverse rate X-axis: 60000 Rapid traverse rate Y-axis: 60000 Rapid traverse rate Z-axis: 60000 Number of tools: 60 Maximum tool diameter: 250 Maximum tool length (from reference line): 500 Tool selection method: Fixed Maximum tool weight: 30 Kg Tool change time: 5 sec. Pressure: 50 BAR Height: 3350 Width: 2820 Depth: 6755 Weight: 14700 Tool kit included

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 2,823 mm, total width: 3,160 mm, table load: 1,500 kg, overall weight: 8,900 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, tool weight: 20,000 g, product length (max.): 3,436 mm, number of axes: 4, This 4-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details. • Milling capacity in S45 (JIS): 634 cm³/min • Drilling capacity in S45 (JIS): 50 mm • Table Size: 1,300 mm x 550 mm • Table Configuration: 5 T-slots, 100 mm distance, 18 mm reference groove • Table Height from Floor: 800 mm • Spindle Nose to Table: 200 mm - 760 mm • Spindle Center to Column: 525 mm • Rapid Traverse (X/Y): 26 m/min • Rapid Traverse (Z): 20 m/min • Feed Rate (X/Y/Z): 8 m/min • Min Spindle Speed: 25 rpm • Max Torque: 758 Nm • Max Tool Diameter: 125 mm (adjacent occupied) / 260 mm (adjacent free) • Max Tool Length: 400 mm • Chip-to-Chip Time: 5.5 s • Coolant Tank Capacity: 200 L • Coolant Pump Power: 0.75 kW • Connected Load (30 min/100%): 41.2 KVA / 36.2 KVA • Compressed Air Supply: 5 kg/cm², 200 L/min Additional equipment • Extraction System: Donaldson Torit DCE Fsdpfjy I Amvjx Akmjgh • Chip Conveyor: Mayfran

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Mazak FH4800 was manufactured in 2004. It features a maximum spindle speed of 12,000 rpm and impressive travels of 560 mm in the X-axis, 610 mm in the Y-axis, and 560 mm in the Z-axis. The machine is equipped with a 40-position automatic tool changer and includes a Fastems 8-station pallet loading system. If you are looking to get high-quality machining capabilities, consider the Mazak FH4800 horizontal machining centre we have for sale. Two units are available: one with the Fastems 8-station pallet loading system and one in standard configuration without the pallet system. A special package price is available for the purchase of both units. Please contact us for further details. • Indexing: 1° • Machine type/condition: Toolroom machine • Operating hours: Low Additional equipment • Fastems 8-station pallet loading system (automation) • Renishaw probing system • Tooling included • Manuals included Availability Fgsdsz Ea Hvepfx Akmjh Two MAZAK FH4800 units are available. • Unit 1: The machine shown in this listing and corresponding to the current advertised price. It is equipped with a Fastems 8-station pallet loading system. • Unit 2: A second MAZAK FH4800 is also available in standard configuration, without the Fastems 8-station pallet loading system, at a lower price.A special package offer is available for customers interested in purchasing both units together. Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2000, functionality: fully functional, 2x MAZAK horizontal machining centers + FMS with 12 stations and 2 loading/unloading bays Model: FH 5800 Year: 2000 Maximum workpiece height: 710 mm Maximum table load: 500 KG X-axis travel: 710 Y-axis travel: 610 Z-axis travel: 660 Spindle connection: BT Maximum spindle speed: 12,000 Spindle power: 22 KW Table size: 500 x 500 Table indexing: 1 degree Fgjdpsz Apgcefx Akmoh Tool magazine capacity: 120 tools per station High-pressure system through the spindle: 50 Bar, with a separate tank and paper filter Maximum workpiece diameter: 720 mm Tool presetting with contact probe for length and tool presence Chip conveyor: belt type

Condition: used, Year of construction: 1998, overall weight: 8,500 kg, Technical Data | Specification Machine Type | CNC turning/milling center Control System | Mazatrol Fusion 640T Year of Manufacture | 1998 Spindles | 2 Turret | 2 Y-axis | ± 50 mm X-axis | 240 mm Z1-axis | 440 mm Z2-axis | 495 mm C-axis | 0.001° Max. Turning Diameter | approx. 260–320 mm* Bar Capacity | 51 mm Spindle Bore | 61 mm Spindle Speed | 35–5,000 rpm Spindle Motor | 22 / 15 kW Max. Torque | 349 Nm Spindle Nose | A2-6 Fedpfozx Sirex Akmegh Chuck | approx. Ø 210 mm Tool Positions | 2 × 12 Driven Tools | 2 × 12 Drive for Driven Tools | 3.7 kW Speed of Driven Tools | 25–4,500 rpm Tool Holder | VDI 40 Rapid Traverse X | 30 m/min Rapid Traverse Y | 10 m/min Rapid Traverse Z | 33 m/min Machine Weight | approx. 8.0–8.5 t Connected Load | approx. 76–77 kVA

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Fgjdpfxoz Ata Hs Akmoh Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm X2-axis 141 mm Y-axis 100 mm Y2-axis 70 mm Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Counter spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Tool turret: Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Fsdpfx Aksz Dtmgjmsgh Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Condition: used, Year of construction: 1987, functionality: fully functional, Mazak QTN 8 CNC lathe Manufacturer: Mazak Type: QTN 8 Year of manufacture: 1987 Condition: used Scope of delivery: Fgsdpfx Aozmpxtokmoh - Machine feet - Chip tray - Documentation - Tool holder

Condition: used, Year of construction: 1998, operating hours: 116,213 h, functionality: fully functional, turning length: 1,035 mm, turning diameter over cross slide: 560 mm, turning diameter: 410 mm, spindle motor power: 26,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,300 rpm, spindle bore: 88 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, mount diameter: 50 mm, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 1,500 rpm, rotational speed (min.): 90 rpm, type of input current: three-phase, torque: 96 Nm, workpiece weight (max.): 200 kg, feed rate X-axis: 5 m/min, feed rate Z-axis: 5 m/min, total height: 2,580 mm, total length: 4,330 mm, chuck outer diameter: 304 mm, total width: 2,240 mm, quill stroke: 130 mm, quill diameter: 100 mm, spindle nose: A2-8", overall weight: 6,700 kg, spindle diameter: 304 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Yamazaki Mazak SQT-30M, model MAZAK SQT30M, manufactured in 1998. Model: SQT-30M Serial number: 138094 Fgedpfx Akjz A Aygsmjh Date: 98-08 Weight: 9500 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 116,213 h, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, controller manufacturer: MAZATROL, controller model: T-Plus, number of axes: 3, This 3-axis Mazak SQT-30M * 1000 turn-mill centre was manufactured in 1998. It features a maximum turning diameter of 410 mm and a turning length of 989 mm. The machine is equipped with a Mazatrol T-Plus control system and offers a spindle speed range of 35 - 3,300 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak SQT-30M * 1000 machine we have for sale. Contact us for further details. - Working Hours: 116,213 hours- Max. Swing Diameter: 560 mm- Max. Swing Over Carriage: 500 mm- Max. Turning Diameter: 410 mm- Standard Turning Diameter: 336 mm- Max. Turning Length: 989 mm- Max. Bar Capacity (Diameter): 77 mm- Main Spindle Speed Range: 35 - 3,300 rpm- Main Spindle Motor Power: 26 kW / 22 kW (30 min / 100% continuous)- Max. Spindle Torque: 637 Nm- Spindle Nose: A2-8"- Spindle Through-Hole: 88 mm- Chuck Diameter: 304 mm- C-Axis Indexing: 0° - 360° / 0.001°- Turret Positions: 12- Turning Tool Shank Size: 25 x 25 x 150 mm- Boring Bar Shank Diameter Range: 8 / 10 / 12 / 16 / 25 / 32 / 40 / 50 mm- Turret Indexing Time: approx. 2.2 s- Driven Tools Motor Power: 7.5 kW- Driven Tools Max. Torque: 96 Nm- Driven Tools Speed Range: 90 - 1,500 rpm- Driven Tools Drilling Capacity: 23 mm- Driven Tools Tapping Capacity: M16 (H-type holder) / M12 (V-type holder)- Driven Tools End Milling Capacity: 25 mm- X-Axis Travel: 245 mm- Z-Axis Travel: 1,035 mm- X-Axis Rapid Traverse: 18 m/min- Z-Axis Rapid Traverse: 24 m/min- C-Axis Rapid Traverse: 100 rpm- X/Z-Axis Feed Rate: 0 - 5,000 mm/min- C-Axis Feed Rate: 1° - 2,000°/min- Tailstock Quill Stroke: 130 mm- Tailstock Quill Diameter: 100 mm- Tailstock Taper: MK 4- Tailstock Travel: 880 mm- Coolant Tank Capacity: 250 l- Coolant Pump Flow Rate: approx. 20 l/min- Coolant Pump Pressure: 5 bar- Power Capacity: 52 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 100 l/min- Required Floor Space: approx. 7.7 m²- Machine Weight: approx. 9,500 kg- Additional Equipment & Accessories: Tool Eye (tool presetter), 3-jaw hydraulic chuck 304 mm with soft/hard jaws, chip/coolant guard enclosure, work light, synchronized tapping, driven tool holders (CAT40 3x vertical, 3x horizontal), boring bar holders, set of adjusting tools, foundation equipment Technical Specification Counter Spindle No Driven Tools Yes Fsdpfxjz D Dfgj Akmjgh

Condition: like new (used), Year of construction: 2022, MAZAK QUICK TURN 250MY SmoothG Max. turning diameter: 380 mm Max. turning length: 504 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: Fgjdpfx Aozk I Tqskmoh - CNC control: Mazatrol SmoothG - KITAGAWA 3-jaw chuck, BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. powered tool holders The machine has only 900 hours of pure machining time!!!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Tailstock MK5 Automatic tool changer (D: 65 x L: 120 x 2.5 kg) Milling spindle, max. speed: 12,000 rpm B-axis, 1° indexing Automatic tool eye Fodpfx Asz Nhcnokmogh Chip conveyor Coolant cooler Cooling through the spindle, 15 bar 1 x Bar feeder, Irco Breuning ILS MUK-7012-III

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 192746, MAZAK PFH-5800 – Technical Specifications Manufacturer: Mazak Model: PFH-5800 Year of manufacture: 2007 Machine type: Horizontal CNC Machining Centre CNC control: MAZATROL 640M Working range • X-axis travel: 730 mm • Y-axis travel: 730 mm • Z-axis travel: 740 mm • Maximum workpiece diameter: Ø800 mm • Maximum workpiece height: 1,000 mm Fodpfxjz D Azae Akmjgh • Pallet size: 500 × 500 mm • Maximum pallet/workpiece load: 700 kg • B-axis: 360° indexing • Standard indexing: 1° × 360 positions • Optional NC rotary table: 0.001° × 360,000 positions Spindle • Spindle taper: CAT 40 • Spindle speed: up to 12,000 rpm • Spindle motor: 30 kW / 40 HP (15-minute rating) • Continuous rating: approx. 18.5 kW • Maximum torque: approx. 167 Nm Tool changer • Tool magazine: 330 tools • Tool holder: CAT 40 • Maximum tool diameter: 150 mm with adjacent pocket empty • Maximum tool length: 400 mm • Maximum tool weight: 12 kg