Used Scm Double End Tenoner for sale (585)

Condition: new, feed rate X-axis: 7 m/min, workpiece height (max.): 50 mm, type of input current: three-phase, input voltage: 400 V, With corner copying, suitable for plastic edges from 0.4 - 3 mm, solid wood edges up to 3 mm, and workpieces from 8 - 50 mm, with pneumatic adjustment. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Premium equipment for high productivity with minimal space requirements! Intuitive operation with eye-S control and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to the processing program; error diagnosis for quick resolution of simple faults; statistics on processing parameters; USB connection; network connectivity ready; prepared for Industry 4.0 with API REST data transfer protocol. Outstanding accessibility to work units thanks to the large hood, which also provides protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Cut-off saw unit with corner rounding (me 35 tr s): for trimming the edge and rounding corners on the top and bottom; for edging solid wood, trimming is done with the radius milling cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Adjustment of infeed fence via spacer plates Dimensions and Weights Length (product) approx. 3314mm Width/depth (product) approx. 1085mm Height (product) approx. 1300mm Weight (net) approx. 623kg Flush radius milling unit Rated output: 2 x 0.35kW Cutter diameter: HW55.3mm Spindle speed: 12000min⁻¹ Extraction port diameter: 60mm Number of extraction ports: 2 Corner copying unit Rated output: 0.35kW Tool diameter: 58mm Speed: 12000min⁻¹ Electrical data Connection voltage: 400V Mains frequency: 50Hz Glue unit Glue pot rated output: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5bar Air consumption: 470l/min Feed Feed rated output: 0.55kW Feed speed: 7m/min Edges Edge thickness (coil material): 0.4 – 3.0mm Pre-milling unit Extraction port diameter: 2 x 80mm Rated output: 3kW Cutter speed: 7200min⁻¹ Diamond cutter diameter: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Rated output: 2 x 0.14kW Gjdpfx Ajxxvansa Ieil Speed: 2800min⁻¹ Workpiece Workpiece thickness: 8 – 50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Gedpfx Aaew Idbyj Isil Position 5: Ovens SCM-BRAVOROBOT P1

Condition: good (used), Year of construction: 2017, In good technical condition. Year of manufacture: 2017. Suitable for dry deburring and disinfection of metal surfaces. Burr removal. Oxide removal on edges and surface finishing. Manufacturer: SCM Group spa Italy. Model: DMC M950. 400V, 71A. Machine weight: 2260 kg. Gedox Ttn Ujpfx Aa Ieil

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. working width: 1100mm - Max. working height: 170mm - 2 units: - Rubber pressure roller 1) Grooved metal calibration roller - Rubber pressure roller 2) Grooved rubber roller + sanding pad + metal roller - Rubber pressure roller - Motor power of unit I and II: 11kW - From below: - 3 metal sliding rollers - Conveyor belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Operating pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg ADVANTAGES – Not repainted – Italian manufacture – 2 operating units – DTR documentation – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) Gedpfox S Eb Rex Aa Ijil (Prices may change with higher exchange rate fluctuations)

Condition: new, Multipurpose combination machine with aluminum sliding table for sawing, milling, surface and thickness planing, and optional long-hole boring Torsion-resistant steel and cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodized aluminum sliding table, 10-year SCM warranty on slideway wear Large crosscut frame with extendable aluminum telescopic fence and flip stops Combination saw and mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for consistent timber feed during thickness planing Four spindle speeds, manually selectable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Fitted with the proven million-fold SCM ball contact system Consistently smooth operation due to hardened and ground guides Not susceptible to dust and dirt thanks to minimal contact point between ball and trapezoidal rail The extraction ports for surface and thickness planing are located on the same (right) side, so the same extraction hose can be used for both planing operations. Gedpfxeiiyppo Aa Ieil Helical steel infeed rollers for constant and even workpiece feed Massive anti-kickback pawls for operator safety 3-knife cutterblock ensures optimum planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Cutting width at rip fence: 800 mm Saw shaft speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs Table dimension: 300 x 450 mm Min. / Max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle speed: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Weight: 430 kg OPTIONS: - Professional fences EUR 300.-- Saw fence with quick lock and micrometric adjustment Surface planer fence 90° ÷ 45° continuously adjustable - Scoring unit incl. blade EUR 292.-- - Handwheel with digital readout for thickness table positioning EUR 129.-- - Mobility kit EUR 119.-- - 2 additional handwheels for unit adjustment EUR 45.-- - TERSA cutterblock, diameter 72 mm EUR 212.-- - Xylent spiral cutterblock with 3 rows of knives EUR 717.-- - Aluminum long-hole boring device EUR 390.-- - 2 flip stops for crosscut fence EUR 150.--

Condition: excellent (used), 4 kW motor, planing height 24 cm, planing width 50 cm, free-running rollers in table, 4 knives Giodpfjx Svwiox Aa Ijl

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 3,774 mm, edge thickness (max.): 3 mm, overall weight: 842 kg, plate height: 50 mm, For plastic edges from 0.4 - 3 mm, solid wood edges up to 5 mm, and workpieces from 8 - 50 mm. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Scraper: Yes Buffing unit: Yes Top configuration for high productivity in a compact footprint! Intuitive operation with the eye-S control and 10” large touchscreen: HMI Maestro Active Edge Graphic display of all processing units and their operating status Graphical simulation of machining operations Gedpfx Aasxxuvbs Ijil Control of all processing units Regulation of glue pot temperature Assistance functions for machine setup according to the machining program Error diagnostics for rapid troubleshooting of simple issues Statistics on machining parameters USB port Prepared for network connection Excellent accessibility to working units thanks to the large hood, ensuring protection and noise reduction Automatic positioning of units when changing panel thickness Panel feed via chain conveyor with rubber slip shoes Quality made in Italy Equipment details 10" touchscreen control panel Optimum machine management with the new 10" touchscreen control panel featuring Maestro Active Edge, visually representing all machine functions Pre-milling unit Two diamond-tipped cutters Glue station Glue is quickly and evenly heated by heating rods located in both the glue pot and the glue application roller Automatic temperature reduction during prolonged machine idle times Teflon-coated glue pot for easy glue changes Device for reusing unused glue Automatic application of edge banding from coils with cut-off knife for edges up to 3 mm Rotary table with Ø 730 mm Self-lubrication of the glue pot Quick-change kit for the glue pot Flush/radius milling unit With horizontal and vertical tracing rollers for optimal tool positioning Equipped with combination milling tool Ø 55.3 mm for flush milling of edges up to 5 mm and radius edges up to 2 mm Precise adjustment via 2 digital displays With chip extraction Surface scraper Absolute cleanliness for perfect finishing of the workpiece surface With rotating copying device Buffing unit Powered by two independently swiveling and height-adjustable motors For perfect cleaning and polishing of panel edges Profile scraper With digital position display For perfect finishing of plastic edges With device to retract the unit when it is not needed Edge magazine For automatic application of strip edges Solid wood strip edges are automatically loaded and synchronized with the panel feed

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Gisdpfx Aox A Tgyja Isl Operating Units: 7 nr

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic pistons Emergency stop switch (pull cord) Gisdpoxxkmiofx Aa Iol Electric oil heater Weight: 3300 kg Touchscreen display Time programmer Year of manufacture: 2021

Condition: excellent (used), Catalogue number 7288 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 7.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindle 2 and 3): 15 kW Spindle 3 with electric right/left adjustment 4) Top horizontal: 230 mm, 11 kW 4th spindle with electric up/down adjustment 5) Bottom horizontal: 230 mm, 7.5 kW 6) Universal: 230 mm, 360° adjustable, 11 kW - All spindles adjustable up/down, right/left - All spindles equipped with brake - Spindle diameter: 40 mm - Top infeed: 4 steel, toothed, powered rollers (incl. 2 double rollers) - Top outfeed: 3 smooth, rubber, powered rollers (incl. 2 double rollers) - Bottom outfeed: 2 rubber, powered rollers - Bottom side pressure: 3 units - Variable feed speed adjustment - Pneumatic feed rollers - Feed motor: 3 kW - Electric adjustment of planing thickness Gisdpfx Aasx Syk He Ijl - Body lifting motor: 0.37 kW - Infeed table length: 2,480 mm - Enclosed in safety cabin - Centralised table lubrication - Extraction port diameters: 130 mm, 140 mm, 4x125 mm - Dimensions (L/W/H): 4,960 x 1,760 x 1,700 mm - Weight: approx. 3,500 kg ADVANTAGES – Manufactured in Italy – 6-head configuration – Machine is in original paint (not repainted) – All spindles equipped with brake – Last spindle is universal – Used planer, in very good condition Original photos Net price: 54,900 PLN Net price: 13,070 EUR (based on 4.2 EUR exchange rate) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), SCM Sandya Uno RCS Wide Belt Sander Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Unit with steel roller Combi unit with pad Abrasive belt dimensions: 930×1525 mm Gedjx Tpk Sepfx Aa Ieil Two feed speeds: 4.5–9 m/min Weight approx.: 1050 kg

Condition: good (used), functionality: fully functional, Total table length 2600 mm Gsdpfjwx Nkisx Aa Ioil Planing width 500 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Edge banding machine - pre-milling unit - gluing unit - sawing unit Gedpfxsx Rcw Hj Aa Isil - milling unit - scraping unit - glue scraping unit

Condition: used, machine/vehicle number: 007983, Position 1: Single Edgebanders SCM-STEFANI KDR Position 2: Panel Return Systems SCM-STEFANI KDR Godpfxewqndlo Aa Ijil

Condition: used, Year of construction: 1990, functionality: fully functional, planing width: 520 mm, total height: 1,200 mm, total width: 1,400 mm, overall weight: 600 kg, table length: 3,000 mm, Equipment: motor brake, SCM F 520 heavy-duty jointer planer Planing width: 520 mm Table length: 3,000 mm Hydraulic height adjustment of the infeed table via foot pedal 4-knife Tersa cutterhead Adjustable straight and concave jointing 4 kW Electric motor brake Machine is fully FUNCTIONAL and in GOOD CONDITION The machine can be inspected and tested at any time at the location in Chemnitz. Gijdpfxjxz Tplj Aa Iel

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, SCM Morbidelli N100 CELL Working area X: 4,286 mm Working area Y: 2,185 mm Working area Z: 150 mm Vertical drilling heads: 12 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 1 grooving saw blade in X Tool changer: 20 positions Barcode reader 3 vacuum pumps Gedpsx Tgubefx Aa Ijil SCM eye-M control system Good condition

Condition: used, Equipment: CE marking, EDGEBANDER "SCM" model S212 used machine – V380/50 – "CE" code: BRD-008 - - - - EQUIPPED WITH: * trimmers * glue pot with pre-melter * end trimming unit with 2 motors * top/bottom trimming unit with pneumatic exclusion * corner rounding unit with pneumatic exclusion * corner rounding unit with 4 motors * edge scraper Gijdpfxsx Sx Ude Aa Isl * brushes * mechanical readouts

Condition: new, Massive work table made of heavily ribbed cast iron Robust base frame constructed from welded steel Precision sliding table made of anodized aluminum Carbide guideways – for long-term precision and minimal maintenance of the sliding carriage Tilting cast iron saw unit with double segment guide Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding table Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality panel frame & telescopic stop, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two steps (from above, table insert removable) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Gjdpfoit I Sbjx Aa Ioil Max. cutting height at 90° (mm): 140 with 400 mm blade Max. cutting height at 45° (mm): 100 with 400 mm blade Saw blade tilting range (degrees): 90/46° Manual saw blade lifting and tilting Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scoring unit motor power (kW) 50 Hz: 1.3 Scoring unit speed (rpm): 9,200 Panel cutting capacity (mm): 3,200 x 3,200 Cutting width for parallel cuts (mm): 1,270 Extraction port diameter (mm): 120, 60

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, CNC machining center - R0.08.61 Composition 3115x1320 Z180 - 52.41.23 Interface for HITECO angle aggregates - 52.46.59 Air pressure booster - 52.41.28 Linear magazine FAST 14 - 52.42.07 Cross line laser on the mobile arm of the machine - 52.42.08 N6 Beams "TV Flex" 1300 mm - 52.41.16 No. 4 Lifters H=75 mm 1,300 mm - 52.41.65 Vacuum pump 90 m³/h 50 Hz - 63.05.22 Console with integrated PC "Eye-M PRO" - 52.46.57 Automatic lubrication instead of manual pump - 52.41.05 RO.AX Drilling group F23L - 52.41.14 Drilling group rotation speed controlled via spindle motor inverter Giodpfjx Rcwmjx Aa Isl - 52.45.59 Linear tool magazine TRB 11 (Y=1320 mm) - 52.41.19 Vertical spindle motor 9.5 kW - 13 hp 24,000 rpm - air-cooled

Condition: used, machine/vehicle number: 007802, Max. panel width: 1000 mm Max. panel length: 2000 mm Gedpfx Aaexn Nf No Isil Length of conveyor: 8200 mm Panel return for edgebander: Right

Condition: excellent (used), Wide belt sander SCM Sandya 10 RCS Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 1. Calibration roller Gedpfox Svxyox Aa Ieil 2. Combi unit with pad CE certificate Sample photo of the machine

Condition: new, Year of construction: 2024, Machine is brand new and factory packed. Loading available in our warehouse and can be quickly delivered. Gedpfxeip Dh Ie Aa Isil ADDITIONAL EQUIPMENT on machine: - automatic lubrication - side suports for long workpieces - Aditional USB key for ''Maestro CNC'' software DRILLING UNIT TECH. DATA: - 8x vertical drilling spindles - 6x horizontal drilling spindles (2+2 on ''X'' and 1+1 on ''Y'') - drilling speed 4200 min-1 - sawing unit with 125 mm diameter MOULDER TECH. DATA - Motor power: 5,5 KW - spindle speed: from 1000 - 18000 rpm OTHER DATA: - maks/min workpiece length: 3050 / 200 mm - maks/min width: 900 / 80 mm - maks/min thickness: 60 / 10 mm - movement speed: 40 m/min - exhaust outlet: 1x 150 / 1x 120 / 1x 80 mm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Edge banding machine - R0.03.61 composition "T-ER1" - 62.15.01 "AUTOSET" Giedpfx Ajx Rcu Eoa Isl - 62.14.93 Pre-heating panel - 62.12.03 Anti-adhesive unit "AAR" - Rectification unit "RT-V1" - 62.15.06 Glue pot "SGP-E" - 62.13.49 Sawing unit "K-2 radius" - 62.15.02 Nesting kit - Milling unit "R-K" - Corner rounding unit "ROUND 1" - Belt scraping unit "RAS-V" - 62.12.61 Spraying unit for band finishing - 62.15.04 Glue scraping unit "RC-N"

Condition: excellent (used), functionality: fully functional, SCM Sandya CLK Wide Belt Sander + Vacuum Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Calibration roller: rubber Combi unit with shoe Giodpfsx Svvfox Aa Isl Extraction ports: 2x 160 mm Sample images of the machine

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Virtually as-new machine Traded in for CNC after only a few months of operational use. - R0.22.16 CE version - 58.01.03 Automatic horizontal/vertical movement of the drill head Giodpfx Ajx Rcuxea Isl - 59.03.93 Servo-controlled adjustment of the descent speed of the drilling group - 58.01.00 Tool holders diameter 10 mm - 58.01.18 Pneumatic hold-downs