Used Studer S20 for sale (13)

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Dkedpfx Ahjw T Sc Nj Sog Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: refurbished (used), functionality: fully functional, center height: 100 mm, grinding length: 650 mm, Internal & external cylindrical grinding machine Studer S20-2 Dedpoqv Eg Refx Ah Sokg Centre distance: 650 mm – Centre height: 100 mm Accessories on request! Ready for delivery!

Condition: used, Year of construction: 1987, grinding diameter 200 mm grinding length 400 mm centre height 100 mm Geometrically overhauled and repainted Dedpfx Ahevw Duuo Sokg With internal grinding device Accessories on request The machine can be viewed in operation at the customer's premises from 2025 through January 2026.

Condition: used, Cylindrical grinder STUDER S20-2 Dkodpjxrg Hxefx Ah Ssg

Condition: used, Year of construction: 1995, functionality: unexamined, Distance between centers: 650 mm Dsdjwu Tdfepfx Ah Sokg ID / OD 2-axis SONY digital read out Coolant tank

Condition: refurbished (used), Details see PDF Dkodpfx Asd H Nrqsh Seg Options: -Internal grinding device -grinding up to 3 diameters in 1 working cycle - other options according to customer requirements accessories: on request

Condition: refurbished (used), Year of construction: 2025, IMMEDIATELY AVAILABLE Studer S20-2 - Mechanically Reconditioned Grinding length: 400 mm Center height: 100 mm Table adjustment: 30° Bore diameter: 127 mm Grinding wheel dimensions: 350 x 32 mm WSS taper: MT4 (stationary and live center) RST taper: MT2 Quill stroke: 20 mm Workpiece weight: 20 kg Tailstock with manual cylinder error correction Other possible options: - Glass scale in X and Z axes - Internal grinding attachment - Grinding wheel flange - LED spotlight with flexible arm - Coolant system - Safety device Dsdpsfg Tbrefx Ah Sekg

Condition: used, Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 20 kg, grinding length: 650 mm, grinding wheel diameter: 350 mm, total width: 3,400 mm, total length: 3,450 mm, total height: 2,000 mm, grinding diameter: 80 mm, grinding spindle motor power: 12 W, overall weight: 1,900 kg, For sale Studer S 20-4 CNC slab grinder Technical data: Range of motion: X: 80 mm Z: 650 mm Table stroke length: 1-650mm Grinding disc diameter max 350mm, Disc bore 127mm Speed: 1600, 1975, 2000 /min Maximum workpiece weight: 20kg Controller: Siemens Sinumerik 3 Power: 12 kW Year of manufacture: 1989 Dimensions: Machine weight: 1900 kg Machine dimensions (H, W, D): 3400x3450x2000 Dsdpfx Ahsvdyg Ts Sokg

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, center height: 100 mm, grinding wheel diameter: 350 mm, workpiece weight between centers: 20,000 g, distance between centers: 400 mm, type of input current: three-phase, grinding wheel width: 30 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 30 rpm, feed length Z-axis: 420 mm, grinding spindle motor power: 3,000 W, overall weight: 1,600 kg, year of last overhaul: 2025, input voltage: 400 V, Cylindrical grinder STUDER S 20 Favorit TECHNICAL CHARACTERISTICS: Year of manufacturing: 1997 Centre distance: 400 [mm] Height of centers: 100 [mm] Stroke Z axis: 420 [mm] Working feed Z axis: 100 - 3500 [mm/min] Orientation of table: 0 - 30 [°] Grinding spindle motor power: 3 [kW] Max. diameter grinding wheel: 350 [mm] Max. grinding wheel width: 30 [mm] Grinding wheel bore: 127 [mm] Workpiece spindle nose: W20 Workpiece spindle min. speed: 30 [rpm] Workpiece spindle max. speed: 1200 [rpm] Max. part weight in part holder headstock between centres: 20 [Kg] Workpiece swiveling range: 0 [°] / +90 [°] Workpiece spindle power: 0.5 [kW] Type of attachment tailstock: MT2 Tailstock quill stroke: 20 [mm] Supply voltage: 400 [V] Total power required: 8 [kVA] Machine dimensions: 2350 x 1480 [mm] Weight: 1600 [Kg] INCLUDED EQUIPMENT: x1 paper tape filtration device x1 SONY LH 31A 2 axis digital read out x1 WALDMANN LED lamp x1 internal grinding spindle type: 82060B / Speeds: 11,900 up to 28,400 [rpm] x1 SENSITRON contact indicator x1 grinding wheel balancing device x1 grinding wheel balancing arbor x1 three-jaw chuck FN Ø100 [mm] MT3 x1 magnetic chuck Ø160 [mm] MT3 x1 table-mounted wheel dresser x37 W20 collets x2 half-centres Dksdpfjwt Tgwox Ah Seg x2 full centres x1 blunt centre x1 pulley Ø105 [mm] for internal grinding spindle x2 external grinding wheel flanges x1 TYROLIT 494271 grinding wheel for external grinding operations Various internal grinding wheels x4 driving carriers Various miscellaneous Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Similar machine to Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD). Also see surface grinder, lathe, machining center, milling machine.

Condition: excellent (used), Year of construction: 1988, TECHNICAL DETAILS: - center height : 100 mm - distance between centers : 400 mm - length of internal grinding : 100 mm - Ø of internal grinding : 3 to 40 mm - maximal table orientation : 30 ° - workhead : spindle speed (variator): 60-1200 Rpm motor power : 0.5 kW internal cone : morse 4/2 - external grinding wheels size : 350 x 30 x 127 mm - wheelhead : power : 3 kW orientation : 15/30 ° Dsdjwc En Sjpfx Ah Sekg - max part weight : 20 kg - max power required : 5 kW - weight: 1900 kg Accessories/options: - complete internal grinding attachment: 45.000 rpm - Novomatic measuring system - Radius wheel dresser - CBN and other grinding wheels - grinding flanges - wheel dresser - chuck for wheelhead - fix steady - collets - internal grinding accessories - spare parts - coolant tank - documentations - etc.... Very low working hours! Under power in our warehouse!

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Studer S20 in very good condition with accessories and documentation Dkjdpfxjwa Iime Ah Sog

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,500 kg, The machine can be tested under power. Dksdpfx Aew Idwzjh Sog

Condition: used, TECHNICAL DETAILS - centers height : 100 [mm] - distance between centers : 650 [mm] - length of internal grinding : 100 [mm] - Ø of internal grinding : 3 to 40 [mm] - maximal table orientation : 30 [°] - workhead : * spindle speed (variator) : 60-1200 [Rpm] * motor power : 0.5 [kW] * interior cone : morse 4/2 - wheels sizes : 350 x 30 x 127 [mm] - wheelhead : * power : 3 [kW] * orientation : 15/30 [°] - maxi part weight : 20 [kg] - maxi power required : 5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3000 x 1400 [mm] - Machine height : 1600 [mm] - Machine weight : 1900 [kg] EQUIPMENT - complete internal grinding attachment : 45.000 [rpm] - 1 complete cooling device - 1 counter headstock with fine adjustment Djdpfeuhby Rex Ah Sokg - 1 reversible and adjustable trueing device - 1 directional diamond holder - 2 axis X, Y digital display - 1 steady rests 3 points