Used Charmilles Wire Edm Machine for sale (95)

Condition: excellent (used), Year of construction: 2015, Wire EDM machine +GF+ AgieCharmilles, very well maintained, regularly serviced machine. Control unit: PC technology AC CUT HMI with LCD color screen, touch screen and mouse Electronic manual control panel Technical data: Travel range X 550 mm, Y 350 mm, Z 400 mm Taper +/- 30° / 400 mm Ijlhccqsu N Da Eeqetg Automatic wire threading with wire diameter 0.25 mm Wire reel unit 16 kg Wire processing unit with disposal system Collision protection for all axes Work table: Hardened 4-sided frame table Dimensions 900 mm x 600 mm Workpiece dimensions max. 1,200 mm x 700 mm Workpiece height max. 400 mm Workpiece weight max. 1,500 kg Dielectric: Capacity 1200 l Filter system with 2 paper filters Water conditioner (ion exchange resin) 10 l Temperature monitoring Machine data: Space requirement approx. 2.6 m x 2.6 m x 2.4 m Weight of machine unit (without dielectric) 3,300 kg Power supply: 400 V, 50 Hz, 11 kVA The machine is in very good condition. An inspection under power is possible at any time.

Year of construction: 1998, Condition: good (used), Charmilles Technologies Robofil 510 EDM machine TECHNICAL DATA Control cabinet Generator type: Isopulse Max. Ambient temperature: 30°C Software storage time: 100 hours Maximum charging time: 60 hours Disk type: 3 ½ '' Number of storable programs: 112 Dimensions: 1800 x 650 x 1000 mm Cooling air: 800 m3/h at 30°C Maximum discharge current: 45 A Graphic color screen: 14 16-bit microprocessor: 3 Machine Machine bed: polymer concrete dimensions: 2100 x 2050 x 2230 mm Weight: 3800 kg Access door dimensions: 1220 mm Workpiece Maximum dimension, workpiece: 1200 x 700 mm Maximum height of the workpiece: 400 mm Maximum load: 1000 kg Travels X-axis: 700 mm Y-axis: 400 mm Z-axis: 400 mm U-axis: 700 mm V-axis: 400 mm Measuring resolution: 0.5 μm Maximum manual speed: 15 mm/s Wire Wire diameter: 0.1 to 0.3 mm Speed: adjustable from 0 to 15 m/min Mechanical tension: adjustable from 0 to 30 N Clearance angle: adjustable from 0° to 30 Maximum height for threading: 300 mm Automatic threading (2 mm): Yes Automatic rethreading: Yes Bobbins: K125 (4 kg) / K160 (8 kg) / K200 (16 kg) Dielectric Deionization: Resin mixture, 20 l Tank type: waterproof steel sheet, welded dimensions: 2030 x 1420 mm Capacity: 450 l Filter system: 10 Flushing, pressure: 0 to 11,5 bar External connections Power Mains frequency: 50 Hz Cos. PHI: 0.8 Ielhoktf S Heccqqjtg Three-phase input voltage: 380 V / 400 V Permissible fluctuations: +10% to -15 Allowable micro-interruptions: 4 ms Connected load: 10 KVA Inrush current: 10 KVA Cooling Minimum pressure difference between inlet and outlet of the cooling source: 2 bars Maximum pressure at inlet: 5 bars Maximum flow rate: 25 l/min Air Pressure range: From 6 to 7 bars Capacity: 1 l/min General data Permissible ambient temperature: 20°C +- 1° C Permissible air humidity: 40 to 80 Noise level: 72 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2810 mm Measurements depth 2600 mm Measurements height 2240 mm Machine weight 3300 kg Movement X-Axis Movement 550 Y-Axis Movement 350 Z-Axis Movement 400 Table Outer length 900 mm Outer width 600 mm Itslhccswhguweqqog This 3-axis CHARMILLES Robofil 440SL was manufactured in 2006. A robust wire EDM machine, it features a large processing area with dimensions of 1200 x 700 x 400 mm and supports part weights up to 1500 kg. Its table measures 900 x 600 mm, and the X, Y, Z axes are 550 mm, 350 mm, and 400 mm respectively. If you are looking to get high-quality EDM capabilities, consider the CHARMILLES Robofil 440SL machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, table load: 750 kg, With cooler Iolhccqjwcq Azeqetg

Condition: good (used), Year of construction: 2004, X-axis travel - 400mm Y-axis travel - 300mm Z-axis travel - 250mm Ijlhccqov Sw Hgjqstg Worktank length - 980 mm Worktank width - 730 mm Worktank height - 250 mm

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 921022, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, TECHNICAL DETAILS Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Itjlhccjv Ul I Doqqog Taper pitch/height: ±30° / 220 mm Machining type: Submerged technology Control system: Windows NT with 12" TFT screen, standard keyboard, and remote control Working area Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Bevel cut: max. ±30° / 220 mm Wire EDM system Wire EDM diameter: Ø 0.33 to 0.10 mm Diameter for Automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic rethreading: Ø 0.33 to 0.15 mm Dielectric Filter: 2 paper cartridges Dielectric temperature: ±1 °C Volume of ion exchange resin filling: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire shredder - Standard interfaces (PCMCIA, Ethernet, etc.)

Condition: good (used), Year of construction: 2004, A well-maintained AgieCharmilles star hole drilling machine that operates reliably. Control unit: VDF monitor All travel speeds and the high-pressure pump can be controlled via the interface keyboard. Technical specifications: Travel range X 300 mm, Y 200 mm, Z 300 mm, auxiliary axis (manual) 100 mm Ielhcou Tvikjcqqetg Bore diameter range 0.3-3 mm Maximum depth 200 mm Worktable: Dimensions 500 mm x 300 mm Maximum workpiece weight 300 kg Water tank: Tank volume 10 l Machine specifications: Dimensions 1,340 mm x 900 mm x 1,940 mm Total weight 1,200 kg Power supply: 400 V, 50 Hz, 4 kVA

Condition: good (used), Year of construction: 1990, Control unit FJ.37X Travel X/Y/Z 450/320/162 mm Travels U/V +/- 50 mm Ielernku Tehccqqetg Workpiece size X/Y/Z 1100/760/360 mm Table load 500 kg Weight 3200 kg Wire guides ø0.25 and ø0.30 Base rails for EROWA clamping beam Wire alignment block Wire threading module

Year of construction: 2002, operating hours: 44,266 h, Condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Ijlhccqsv I Hfdjqstg Workpiece Workpiece X 1200 mm Workpiece Y 700 mm Workpiece Z 400 mm Table Table load 1000 kg This 3-axis CHARMILLES Robofil 440 was manufactured in 2002. Ideal for precision wire EDM tasks, this machine offers robust performance and reliability. If you are looking to get high-quality EDM capabilities, consider the CHARMILLES Robofil 440 machine we have for sale. Contact us for more information. Application Types EDM

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, Charmilles Robofil 440 CCS Year of manufacture 2011 Charmilles Millenium control system Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. Taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2810 x 2240 mm Total weight of the system: 3300 kg The machine is cleaned and overhauled by us after receipt of order and tested for all functions. We are also happy to carry out an individual test cut for you. We offer the following services on request: Itoljvdt Epshccqqjg - Commissioning of the machine at your premises - Warranty of 6 months - Control training - Accessories such as coolers and clamping devices

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, TECHNICAL DETAILS Travel X / Y / Z: 550 / 350 / 400 mm Travel U / V: 550 / 350 mm Tilt angle / height: ± 30° / 400 mm Resolution X/Y/Z/U/V: 0.5 µm Speed per axis: 0 - 900 mm/min Workpiece dimensions: 1200 x 700 x 400 mm Workpiece weight: 1500 kg Dielectric level: 0 - 435 mm Dielectric volume: 1200 l Deionization bottles: 1 piece Total volume of deionization resin: 20 l Itolhccqet Utcrsqjg Programmable pressure levels: 4 bar Injection pressure upper nozzle: 2 / 4 / 8 / 13 bar Injection pressure lower nozzle: 2 / 4 / 8 / 13 bar Standard thread guides: 0.25 m Programmable speed of the thread flow: 0.5 - 15 m/min Programmable thread tension: 0.3 - 2.5 daN Automatic threading for thread: 0.1 / 0.2 / 0.25 / 0.3 mm Automatic rethreading for thread: 0.2 / 0.25 / 0.3 mm Min. pre-hole diameter for automatic threading: 0.8 mm Max. Height for automatic threading with thread: 0.25 mm Minimum finishing: 0.20 µm Ra MACHINE DETAILS Weight with dielectric: 4450 kg Weight without dielectric: 3250 kg Dimensions: 2600 x 2810 x 2080 mm

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 680221, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: ± 30 mm V-axis travel: ± 30 mm Iolhccqev Tp Apsqetg Taper pitch/height: ±15° / 110 mm Working area Table dimensions: 820 × 610 mm Max. workpiece size: 980 × 730 × 250 mm Max. workpiece weight: 1,000 kg Tank volume: 250 l Wire EDM system Wire EDM diameter: 0.25 mm Programmable wire tension: 0.3 to 3 daN Automatic wire threading for wire diameters: 0.10 / 0.20 / 0.25 / 0.30 mm Dielectric Paper filter: 2 cartridges Dielectric temperature: ± 1 °C Volume of ion exchange resins: 20 l Max. injection pressure: 4-stage programmable Tank volume: 1,200 l MACHINE DETAILS Dimensions (W × D × H): 1,950 × 2,550 × 2,000 mm Weight without dielectric: 3,250 kg Input voltage: 380 / 400 V Total installed power: 10 kVA Surface roughness: 0.28 µm EQUIPMENT - Linear scales on all axes - Closed wireless diamond guides with zero backlash - Programmable injection pressure with 4 stages - Windows NT-based control with PC keyboard and touchscreen

Year of construction: 2005, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 935089, - Water bath machine with automatic wire threading - Closed diamond wire guides for different wire diameters - Collision protection on all 5 axes (ICP) - Pictured clamping accessories included TECHNICAL DETAILS travels X / Y / Z: 550 / 350 / 400 mm travels U/V axis: 550 / 350 mm Conicity: max. +/- 30° at 400 mm height workpiece dimensions: max. 1200 x 700 x 400 mm Opening width: 1020 mm (accessible from one side) workpiece weight: max. 1500 kg Surface quality: max. Ra 0.22 μm Cutting speed: max. 300 qmm/min Available wire diameters: 0.15 - 0.30 mm Islhccolru Rbeqqstg Control: Charmilles Millenium with Windows operating system (12"-TFT touch screen). MACHINE DETAILS dimensions (length x width x height): 2600 x 2810 x 2240 mm net weight: 3300 kg supply voltage: 400 V / 3 phases / 50/60 Hz Connected load: 10 kVA LAN connection: included, for network integration

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 194604, workpiece weight (max.): 800 kg, travel distance X-axis: 628 mm, travel distance Y-axis: 398 mm, travel distance Z-axis: 162 mm, TECHNICAL DETAILS X-axis travel: 628 mm Y-axis travel: 398 mm Z-axis travel: 162 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Cutting speed: max. 711 mm/h Working area Workpiece size (W × D × H): 1,350 × 688 × 361 mm Max. workpiece weight: 800 kg Cone pitch/height: ± 30° / 67 mm Axis measurement: linear glass measuring rod Wire EDM system Wire guides: 0.10 mm and 0.25 mm Permissible coil weights: 4 to 8 kg Dielectric Ielhccev Tpuleqqetg Number of filter cartridges: 16 Units Tank volume: 1,003 l MACHINE DETAILS Weight (with dielectric): 5,200 kg Input voltage: 380/400 V (three-phase alternating current) Power consumption: total: 12 kVA Installation dimensions: approx. 4.3 x 1.3 m EQUIPMENT - Linear scales on all axes - Collision protection on the U, V, and Z axes - Automatic wire threading and rethreading - CAM-CT for path programming - CT-EXPERT for generator optimization - PROFIL-EXPERT for geometry-dependent cutting strategies - DIN-compliant wire spool holder

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Itjljv Tpnrshccqqsg Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 448 mm, travel distance Y-axis: 318 mm, travel distance Z-axis: 158 mm, TECHNICAL DETAILS X-axis travel: 448 mm Y-axis travel: 318 mm Z-axis travel: 158 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Workpiece height: max.: 360 mm Workpiece dimensions (W × D × H): 1,150 × 726 × 360 mm Workpiece weight: max.: 800 kg Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recovery: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin filling volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. Machining speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Input voltage: 380/400 V Total connected load: 12 kVA EQUIPMENT - Linear scales on all axes - Collision protection in U, V, and Z - Wire break detection - Surface-optimized generator for longer tool life - Optimized filter technology for consistent process reliability Itolhjv Tn Udoccqqsg

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 132019, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 160 mm, Machine overhauled in 2007 TECHNICAL DETAILS X-axis: 320 mm Y-axis: 220 mm Z-axis: 160 mm U-, V-axis: ± 48 mm Tap pitch/height: ±30° / 66 mm Travel speed: 1 – 900 mm/min Working area Tank dimensions (W × D × H): 1,000 × 490 × 260 mm Ielhcsv Tn A Ujcqqstg Load capacity: max. workpiece weight: 500 kg Dielectric volume: 240 l Wire EDM system Wire EDM diameter (single wire): 0.33 – 0.05 mm Wire EDM diameter (double wire): 0.33 – 0.05 mm Automatic wire threading: 0.33 – 0.05 mm Automatic rethreading: 0.33 – 0.07 mm Min. threading hole: 0.3 mm (for 0.25 mm wire) Number of spools: 2 front, 1 rear Front spool weight: 1.6 – 8 kg Rear spool weight: 16 – 25 kg Taper: ± 30° Dielectric Filter type: 3 built-in paper cartridges Total filter area: 66 m² Tank volume: 800 l Numerical control Control type: PC-based CNC Screen: LCD 12.1" TFT touchscreen MACHINE DETAILS Dimensions (W × D × H): 2,320 × 2,310 × 2,320 mm Machine weight (without dielectric): 3,900 kg Connected load: 15 kVA EQUIPMENT - Microcut function for wire diameters of 0.02–0.03 mm - CT robot interface installed at the factory

Condition: used, Year of construction: 1995, Functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Itolhccjtylpijqqsg

Condition: used, Year of construction: 1995, Functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Iolhcotylpcscqqetg

Condition: used, Year of construction: 1993, table length 600 mm table width 400 mm Iolhcjvzh Rujcqqjtg weight of the machine ca. 4 t dimensions of the machine ca. 3,5*3,5*2,5 m

Condition: good (used), Year of construction: 1995, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 1,550 mm, total width: 1,800 mm, total length: 2,050 mm, A Charmilles Technologies die-sinking EDM machine of the Roboform 30 type is for sale The machine is fully functional and ready for immediate use Technical data Year of manufacture: 1995 X-path: 350 mm Y-path: 250 mm Z-path: 300 mm C-path: 360 ° Measuring resolution: 0.5 µm Itjlhccouy T Aqeqqeg Working basin: 370*940*590 mm Capacity: 200 l Table: 500*400 mm max workpiece weight: 500 kg max workpiece dimensions: 350*750*525 mm Mains supply: 240 V/50 Hz/10 kA Dimensions: 2,050*1,800*1,550 mm Weight: 1870 kg Transportation and loading can be arranged on request, at an extra charge. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1998, Functionality: fully functional, Equipment: compressor, cooling unit, documentation/manual, fridge, Charmilles Wire EDM Itjlewf Nwcehccqqeg MACHINES UNPLUGGED SOLD AS IS WITHOUT WARRANTY

Year of construction: 2011, Condition: good (used), Additional equipement not included. Itslhccqopxnwzoqsg

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Two Robofil 240 and 330 machines Charmilles Robofil 240 Year 2001 Travel (X, Y, Z axes): X = 350 mm, Y = 220 mm, Z = 220 mm. U/V axis movement: U = ± 30 mm, V = ± 30 mm, ensuring complex cuts and precision tapering. Maximum workpiece size: 860 mm x 530 mm x 220 mm. Workpiece weight: 500 kg. Table dimensions: 600 mm x 400 mm. Wire diameter range: typically 0.15 mm to 0.33 mm, allowing for cutting flexibility. Achievable surface finish: Ra 0.3 µm. Positioning accuracy: ± 0.002 mm. Machine weight: approximately 2,500 kg. In very good condition. Supplied with tools and documentation. In good working order. Islhcowf E Ahjcqqetg Charmilles Robofil 330F Year 2000 Travel (X, Y, Z axes): X = 400 mm, Y = 300 mm, Z = 400 mm. U/V axis travel: U = ± 30 mm, V = ± 30 mm - essential for complex taper cuts. Maximum workpiece dimensions: 800 mm x 550 mm mm x 400 mm.Maximum workpiece weight: 1000 kg.Table size: 600 mm x 450 mm.Wire diameter capacity: 0.1 mm to 0.3 mm, meeting various cutting requirements.Achievable surface finish: Ra 0.25 µm.Positioning accuracy: ± 0.005 mm.Machine weight: approximately 3500 kg.In very good condition.Supplied with tools and documentation.In good working order.

Condition: used, Functionality: fully functional, Equipment: compressor, documentation/manual, fridge, Wire EDM - Wire EDM Machines Charmilles ROBOFIL 4020SI YEAR 1998 Specifications X axis (longitudinal) 400 mm Y axis (transverse) 250 mm Z axis (vertical) 200 mm Max. workpiece length 800 mm Islhcewf Nuzecqqotg Max. workpiece width 560 mm Max. workpiece height Workpiece diameter 360 mm Maximum workpiece weight 1000 kg CNC type Bed length 990 mm Bed width 505 mm Bed height 270 mm ----- Dimensions (L x W x H) 3400.0 × 2400.0 × 2300.0 Weight 4500 kg MACHINES UNPLUGGED SOLD AS IS WITHOUT WARRANTY