Used Emco Cnc Lathe for sale (134)

Condition: not inspected (used), Leadscrew and feed rod lathe, Manufacturer: Emco, Model: Maximat Mentor 10 Hjdpfow U Rdhox Afponu

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Hnjdjw Rrvwopfx Afpeu Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. Hjdjw I S Uuspfx Afpenu X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: excellent (used), Year of construction: 2023, Work Area Longitudinal slide travel (X) 350 mm Cross slide travel (Y) 250 mm Usable vertical slide travel (Z) 300 mm Distance spindle nose – table surface (min.-max.) 120 – 420 mm Milling Table Cast iron table, ground Clamping surface (LxW) 520 x 300 mm Table surface height above floor 900 mm Max. table load 100 kg Number of T-slots 5 T-slot size acc. to DIN 650 12 mm T-slot spacing 45 mm Milling Spindle Speed range – direct drive 0 – 10,000 rpm (Three-phase asynchronous motor) Torque (100/60% DC) 33 / 41 Nm Power (100/60% DC) 7 / 8.5 kW Tool holder per DIN ISO 69871-A SK 30 Pull stud per DIN ISO 69872 (similar to 7388/2) M12, Type A Tool holder balanced G2.5 (per DIN ISO 1940, at 10,000 rpm) Slide Drives (Servo Motors) Feed rate in X / Y / Z 24 m/min Rapid traverse speed in X / Y / Z 24 m/min Feed force in X / Y / Z 3000 / 3000 / 4000 N Mean positional scatter per VDI 3441 in X / Y / Z 4 / 4 / 4 µm Hnjdpfx Aow N Nvljfpou Tool Magazine Tool changer based on S-arm principle with random management Number of tool stations 20 Direct tool change time 2.5 s Max. tool diameter Ø 63 mm Max. tool diameter with adjacent slot empty Ø 80 mm Max. tool length 200 mm Max. tool weight 5 kg Clamping force 1500 N Max. total tool magazine load 60 kg Coolant System (Option) Coolant supply at milling spindle via 3 nozzles Tank capacity (standard) 140 l Delivery pressure at 50 Hz 3.5 bar Flow rate at 3.5/1 bar 15 / 65 l/min Pneumatics Supply pressure 6 bar Connection line Ø 10 mm Supply volume 50 l/min Compressed air quality per DIN ISO 8573-1 Purity class 4 Lubrication System Main spindle bearings Lifetime grease lubrication Guideways automatic central oil lubrication Feed screws automatic central oil lubrication Electrical Connection Power supply 3/PE 400~ V Max. voltage fluctuations +10 / -10 % Frequency 50 / 60 Hz Machine connected load 9 kVA Max. main fuse for machine 20 A gG Required short-circuit power 700 kVA Dimensions / Weights Overall height 2200 mm Installation area (WxD) (excluding coolant and options) 1600 x 1710 mm Total machine weight 1970 kg (excluding coolant and options) Coolant tank (standard, empty) 60 kg Chip Conveyor Hinged belt conveyor for wet and dry machining Discharge height 500 mm 4th Axis / NC Rotary Table Resolution 0.01° Max. speed 44 rpm Max. torque 20 Nm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R6AP3801, turning length: 600 mm, turning diameter: 360 mm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS Turning diameter: 360 mm Turning length: 600 mm Control: Siemens CNC 840 D MACHINE DETAILS Operating voltage: 400 V~ Phases: 3/PE Frequency: 50/60 Hz Maximum current: 48 A Nominal current: 36 A Hjdpfx Afjw Em A Ajpenu Short-circuit current (Ik): 6 kA EQUIPMENT - Double spindle

Condition: used, turning diameter . mm Hnodsqn A Rrjpfx Afpou turning length . mm swing diameter over bed slide . mm

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories collet equipment is included Hjdpfx Afjwpkd Sepenu

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Hnodew Dfhuepfx Afpju

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - multifix tool holder with 3 holders - coolant system Hodpfx Aowy Hvxefponu - machine lighting - live center - bed stop - machine feet

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Hnsdpeu Ibihofx Afpsu Technical details shown in attached pdf document. Parts shown by hand not come.

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm Hnedevwgpbspfx Afpsu spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: used, functionality: fully functional, EMCO Lathe Maximat V13 380 Volt Serial No.: D1E8706022 MB No.: 99826 Condition: used Location: 86928 Hofstetten Hnjdpfev H Uklex Afpou Price: €8,900 net

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: Hnjdpfx Aowag Stofpou >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Hjdjd I R E Nopfx Afpsnu D - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, total length: 2,495 mm, total width: 1,730 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 1,500 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Cycle controlled lathe center width 1000 mm centre height 200 mm spindle bore 53/50 mm max. Speed 4000 rpm Spindle connection size 5, DIN55029 Max. drive power Drive power 7,5 / 10 kW Manual machine (operation via electronic handwheels) Hnedjdtmwtjpfx Afpju Siemens 828D full CNC control dimensions (LxWxH) 2320 x 1730 x 1700 mm Machine weight 1500 kg As a regional partner of EMCO we offer maintenance, service and training in the field of conventional machines. Visit our showroom in Stuttgart for machine inspections.

Condition: used, Year of construction: 2008, greates pass round over bed 600 mm swing diameter over face slide 500 mm control Siemens Sinumerik 840 PL max. turning diameter 430 mm Max. Turning length 744 mm max. bar material dia. 65 mm travel -x axis 270 mm travel -z axis 750 mm travel -x2 axis 205 mm Hnodpfxev Rgzke Afpeu travel -z2 axis 750 mm travel -y axis 100 (+/- 50) mm main spindle speeds 0 - 5.000 U/min Subspindle speed 0 - 7.000 U/min number of tapers in turret head 2x 12 tool taper VDI 30 CNC Turning- and Milling Center | EMCO - HYPERTURN 665MCPlus with main and counter spindle, C and Y axis, 2 turrets aligned for driven tools, and equipped with a bar feeder Irco Profimat as well as a coolant system Knoll SF 1000/Turbo- 1. The machine has approximately 26,710 hours of production operation. Scope of delivery / Equipment: + 2 spindles: main and counter spindle with C-axis + 2 turrets for driven tools (each with 12 stations) + Upper turret equipped with Y-axis + Internal cooling + Chip conveyor + Bar feeder Irco Profimat + Driven tools (straight and angled) + Chucks for main and counter spindle + Extraction system + Workpiece discharge device with conveyor belt + Coolant system Knoll SF 1000/Turbo-1 + Various holders, approx. 80 pieces VDI 30 + Boring bar holders + Jaw holders The machine is in well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN

Condition: used, Year of construction: 2008, turning length: 550 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 510 mm, bar diameter (max.): 65 mm, Twin-spindle lathe EMCO MAXXTRUN 65 Year of construction: 2008 Control: Sinumerik 840D Program running hours: 20,000h Technical Data: - Main spindle speed: 0 - 5,000min-1 - Drive power: - Torque: - Counter spindle speed: 0 - 7,000 min-1 - Drive power: - Torque: - Turning length: 510mm - Turning diameter: 320mm - Bar passage: 65mm Turret: - Driven tool speed: 0 - 5,000 min-1 - Drive power: - Number of tool positions: 12 - Tool holder: VDI 30 Travel distances: - X-axis: 210 Hnodpfewnxlhox Afpeu - Z1-axis: 550mm - Z2-axis: 550mm Accessories: - Parts catcher - Conveyor belt - Chip conveyor - Coolant system

Condition: repair required (used), Year of construction: 2008, operating hours: 9,000 h, functionality: not functional, machine/vehicle number: R65EW1851, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 4,200 rpm, No reserve price - guaranteed sale at the highest bid! Nimble and precise machine with lots of accessories, driven tools and collet chuck with various collets, including square and hexagon. Condition: Used machine, previously used in Thailand. Due to the climatic conditions on site, the machine shows external signs of use. The pneumatics show signs of wear, especially from the distributor: brittle hoses, some broken. It is not possible to assign the hoses from the distributor valve without a diagram. The pneumatics must be repaired. TECHNICAL DETAILS Swing diameter over bed: Ø 600 mm Swing diameter over cross slide: Ø 360 mm Distance main spindle (clamping flange) - tailstock center: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Hnodpfx Afovrz A Sepou Max. bar diameter: Ø 65 mm Travel ranges Travel path X: 210 mm Travel path Z: 610 mm Main spindle Spindle connection according to DIN 55026: KK 6 Outer spindle diameter in the front bearing: Ø 100 mm Spindle bore: Ø 73 mm Hollow clamping cylinder with draw tube, max. passage: Ø 66.5 mm Max. chuck size: Ø 250 mm AC motor, power (100%, 60% ED): 15 / 18 kW Speed range (infinitely adjustable): 60 - 4,200 rpm Max. torque: 192 Nm Tailstock Automatic tailstock: hydraulically operated Tailstock travel: 500 mm Max. tailstock pressure force: 8,000 N Travel speed: 20 m/min Inner taper of the tailstock quill: MK 4 Feed drives Rapid traverse speed X/Z: 24 / 24 m/min Feed force X: 5,000 N Feed force Z: 7,000 N Acceleration time from 0 to rapid traverse: 0.2 s Position spread (according to VDI 3441 in X/Z): 3 / 5 µm C-axis (spindle 1 and 2) Resolution of the rotary axis: 0.001° Rapid traverse: 1,000 rpm Spindle indexing (disc brake): 0.01°

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: Hodpowvuf Tjfx Afponu >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Hjdpfx Afsv Iqm Soponu Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: new, Year of construction: 2025, Immediately available stock machines subject to prior sale. Please contact us for an offer. Emcomat 14 D conventional lathe center width 650 mm Center height 140 mm Hedjdtmy Tspfx Afpsnu Max. Speed 4000 rpm Spindle connection size 4 (DIN 55029) Max. Drive power 7,5 kW Dimensions (LxWxH) 1280 x 1480 x 730 mm Machine is equipped with digital display. (Constant cutting speed within gear stage) As a regional factory representative of EMCO we offer maintenance, service and spare parts for conventional machines from EMCO. Visit our showroom in Stuttgart and contact us for a qualified consultation.

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Hedpfx Aov Iqlzsfpsnu Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: as good as new (ex-display), Year of construction: 2024, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. Hnodpfx Afjibd Alepsu We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, center height: 170 mm, total length: 1,650 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, overall weight: 755 kg, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, New machine immediately available from our warehouse in Stuttgart. ( subject to prior sale) Whether prototype construction, maintenance or very important the training - the conventional and cycle-controlled machines of EMCO create here the balancing act and offer highest accuracy on smallest space and flexibility up to the detail. From possible accessories to the organization of the insertion, we are at your side with advice. Highlights of the EMCOMAT 17D - Main spindle DIN55029 - Tailstock (off-center adjustable) - Single steel holder (clamping claw) - Belt drive for feed gear - Chuck protection with electric limit switch - Optional equipment such as coolant device, sliding chip guard doors, etc. Working range: - Travel in X/Y/Z: 220 / - / 710 mm - center distance: 700 mm - Center height: 170 mm Main spindle: - Max. Speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029) - Max. Drive power: 5.3 kW Hjdpfx Ajdq Rb Aofponu Tailstock: - Internal cone: MK3 - quill stroke: 120 mm - inner taper of the quill: 50 mm The machine can be inspected in Stuttgart.

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 200 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Whether prototype construction, maintenance or, most importantly, training - EMCO's conventional and cycle-controlled machines manage the balancing act and offer maximum accuracy in the smallest possible space and flexibility down to the last detail. Highlights of the EMCOMAT 20D- Main spindle DIN55029- Tailstock (eccentrically adjustable)- Simple steel holder (clamping claw)- Belt drive for feed gear- Chuck protection with electric limit switch- Optional equipment such as coolant device, sliding chip guard doors etc.Working range:- Travel in X/Y/Z: 220 / - / 1010 mm- Center distance: 1000 mm- Center height: 200 mmMain spindle:- Max. travel distance in X/Y/Z: 220 / - / 1010 mm- Max. travel distance in X/Y/Z: 220 / - / 1010 mm- Max. travel distance in X/Y/Z: 1000 mm Speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm - Max. speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm Drive power: 5.3 kW Tailstock:- Inner cone: MK3- quill stroke: 120 mmm- inner cone of the quill: 50 mm Hnjdpfjd D I Thex Afpeu