Used Emco Emcoturn E45 for sale (112)

Condition: excellent (used), Year of construction: 1999, EMCOMAT E260x1500 Gbedpfx Aezx D Aqscisw Year of manufacture: 1999 EM26060L99111080/F

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm Gbjdpfx Aeu Ixw Aeciow tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, Year of construction: 2024, travel -x axis 5.550 mm travel -y axis 4.000 mm travel -z axis 2.000 mm control HEIDENHAIN - TNC 640 surface area 4.000 x 2.000 mm faceplate diameter 3.500 mm turning speed range - faceplate 0 - 150 U/min max. workpiece weight on faceplate 20.000 kg Spindle speed 15 - 6.000 min -1 tool adaptor HSK 100-T spindle drive 38 kW numbers of positions in the tool changer 40 Travelling Column Gantry Milling Machine for 5-Axis Simultaneous Machining with Integrated Rotary Turning Table | MECOF / EMCO – DYNAMILL HP5 equipped with Coolant system with internal coolant supply ITC (40 bar), Chip conveyor, Heidenhain TS 460 touch probe, 40-position automatic tool changer, The machine has only approx. 1.108 H spindle hours. Additional Equipment and Features: - NC milling head (infinitely variable positioning) - Heidenhain HR 550 FS wireless handwheel - Kinematic optimisation of the milling heads Gjdpfxe Ai Ugho Acisbw - Laser tool measurement system - Interpolation turning The machine is in a very well-maintained, like-new condition and can be inspected under power at any time in the factory location. Videos of the machine at its current location are available upon request. Please refer to our quotation for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DYNAMILLHP5 | DYNAMILL HP 5 | DYNAMILL HP-5

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Parts shown by hand not come. Gbedpfxju Ibiho Acisw

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: S5E261602, spindle bore: 59 mm, spindle speed (max.): 6,200 rpm, spindle motor power: 30 W, total height: 2,275 mm, total length: 4,015 mm, total width: 2,156 mm, workpiece weight (max.): 160 kg, type of input current: three-phase, overall weight: 4,400 kg, distance table center to spindle nose: 1,015 mm, spindle nose: KK5, Equipment: documentation/manual, EMCO UT50 MY (Siemens ONE), S5ES103 Versatile universal lathe with main spindle, tailstock, and turret, including a milling drive. Designed for machining medium-sized chuck, shaft, or bar parts. It impresses with its user-friendly operation, high accuracy, fast Gedpfxe Aiuxls Aciebw changeover times, and efficient cost-effectiveness. Main spindle (belt drive): • Connection A2-5" (DIN 55026) • Max. bar capacity: ø50 mm • Max. drive power: 30 kW • Max. torque: 143 Nm • Max. speed: 6200 rpm (depending on the clamping device) Tool system: 12-station tool turret VDI30 axial, with direction logic for powered and stationary tools. • Max. power: 4 kW • Max. torque: 16 Nm • Max. speed: 5000 rpm • C-axis on the main spindle Tailstock: • Programmable tailstock, hydraulically operated, robust construction without a quill, max. contact force 6000 N, Morse taper MT4. Y-axis: • Travel range: +40 / -40 mm • Rapid traverse speed: 10 m/min Includes: • Hollow clamping cylinder incl. draw tube • Mechanical holding brake (main spindle) • Sinumerik ONE control system o 15" multi-touch display o SHOPTURN dialog programming o 3D simulation and monitoring o Rest material removal cycle o Execution from external storage o CAD reader (DXF import) o TRANSMIT and TRACYL o USB interface / network drive (Ethernet) o PC keyboard incl. HMI hotkeys, and much more. • LED machining area lamp • Coolant system including coolant pump (7 bar/50 Hz or 10 bar/60 Hz) • Work area flushing (additional pump 3.5 bar) • Air gun with spiral hose • Hydraulic unit • Preparation for mechanical/electrical oil mist extraction • Interface for chip conveyor • Vibration-absorbing leveling feet • High-performance anchor bolts • Documentation / CE certificate - PARTS CATCHER / UT50 Max. finished part length: 120 (200) mm Max. finished part diameter: 51 mm Max. finished part weight: 2 kg - EMCO BAR LOADER INTERFACE FOR ECONDPARTY BAR LOADERS - MACHINE STATUS LAMP (LED) - TOOL PRESETTER / UT50 - 14 BAR HIGH PRESSURE COOLANT PUMP / 50 Hz - CHIP CONVEYOR 1200 MM / UT50 - CLEANING GUN / MULTIFLOW - FOOT PEDAL - Instruction Manual UniversalTurn 50 EN - Standard packing - Control language / ENGLISH

Condition: excellent (used), Year of construction: 2024, S45 TCM – SINUMERIK 2-AXIS CNC TURNING MACHINE WITH TAILSTOCK AND POWERED TOOLS, INCLUDING A C-AXIS Gsdpfx Aj Ai Ttkociebw 11 kW motor power, 0-6300 min-1 speed, linear guide system, digital drive system, direct rotary encoder on the spindle. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. NEW COLOR SCHEME Includes: • 12-position tool turret VDI 30, axial with direction logic for up to 6 powered tool holders! max. motor power 4 kW max. torque 16 Nm speed range: 0-5000 rpm • C-axis for main spindle • Mechanical spindle brake (min. division 0.01°) • Tailstock Tailstock diameter: 60mm Tailstock stroke: 120mm Morse taper: MK 4 max. tailstock force: 5000N • Headstock, size 45 with spindle connection KK5 (DIN 55026) • Hollow chuck cylinder incl. draw tube • Control system Sinumerik 828D - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 10.4" TFT color monitor - 3D simulation - and more • Machine light • Coolant system • Hydraulic unit • Interface for chip conveyor • Documentation Year of manufacture: 2024 R2L240501

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 8,300 W, total height: 1,700 mm, total width: 1,750 mm, overall weight: 1,800 kg, controller manufacturer: FAGOR, controller model: 8055, product length (max.): 2,670 mm, number of axes: 2, Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details. - Description: 2-axis teach-in / cycle-controlled CNC lathe with Fagor 8055 CNC control- Control Unit: Fagor 8055 (CPU 8055/AB-T, AXES 8055, I/O 8055)- Distance between centers: 1000 mm - Center height (distance above centers): 200 mm - Max swing over bed: Ø 400 mm- Turning length: 1,000 mm- Maximum turning diameter over slide: 220 mm- Travel range, Z-axis: 1,000 mm- X-axis travel: 220 mm- Turning tool cross-section: 20x20 / 25x25 mm- Spindle thread: Camlock 5- Internal taper: 1:20- Spindle bore: ø51.6 mm- Spindle speed: 0–3000 rpm, continuously variable- AC Motor Drive: 18.5 / 8.3 kW- Tailstock Quill Diameter: 52 mm / MK4- Tailstock Quill stroke: 145 mm- Power supply: 400 V / 3-phase / PE- Rated power: 10 kVA- Included Equipment / Accessories:- SMW AUTOBLOCK wedge-type chuck (includes several base jaws)- Multifix quick-change tool holder (includes several different tool holders), chuck key- Drill chuck- Rotating center- Safety device fully functional Technical Specification Counter Spindle No Gbjdozrvktjpfx Aciew Driven Tools No

Condition: used, Year of construction: 2008, overall weight: 5,000 kg, input voltage: 400 V, type of input current: AC, We are offering this used EMCO E-1200 vertical machining center, manufactured in 2008. Manufacturer: EMCO Gsdpfx Aj Ai Sdwscisbw Model: E-1200 Serial Number: M-0640208 Year of Manufacture: 2008 CONTROL MANUFACTURER: SIEMENS CONTROL MODEL: SINUMERIK 810D MACHINE WEIGHT: 5300 KG TABLE LENGTH: 1300 MM TABLE WIDTH: 570 MM TRAVEL NUMBER OF AXES: 3 X-AXIS TRAVEL: 1200 MM Y-AXIS TRAVEL: 550 MM Z-AXIS TRAVEL: 500 MM TECHNICAL SPECIFICATIONS SPINDLE SPEED: 10000 RPM TOOL STATIONS: 20 If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Gbsdpfx Acoyxxhqoijw

Condition: good (used), Year of construction: 2003, EMCO HYPERTURN 665MCPLUS Turning center with C/Y-axis Portal loading system and bar loader magazine Turning and milling operations performed in a single setup Year of manufacture 2003 Control system: SIEMENS SINUMERIK 840D Equipment: Portal loading system with 20 base pallets Automatic bar loader magazine, manufacturer IEMCA, type MASTER 880 MP 2 tool turrets, each with approx. 12 stations Main spindle with C-axis Counter spindle with C-axis Chip conveyor, manufacturer KNOLL Cooling unit, manufacturer KELVIO Included in the scope of delivery: VDI tool holders Powered tools Tool cabinet Drawer cabinet Operating manual/documentation Machine parameters on storage medium Technical data and equipment – see PDF. All technical information, illustrations, and content are non-binding and without warranty. Subject to change and errors. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only the accessories that are explicitly listed here, in the order confirmation, and on the invoice. EXW D-40721 Hilden, Germany (Incoterms® 2020) excluding disassembly, removal, and loading Gbsdpfx Ae Ah Evmociew Delivery time: immediately, subject to prior sale Payment: 100% prepayment upon order placement

Condition: used, Year of construction: 2003, functionality: fully functional, control 840D-PCU 50 V1 3 Gbodpfxeqn A Rre Acijw coolant ja chip conveyor ja kW generator - rated current 110 A connected load 56 kW

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle Gsdsz Rzh Hopfx Aciobw • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: ready for operation (used), Year of construction: 2018, operating hours: 25,500 h, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D-sl, number of slots in tool magazine: 24, number of axes: 8, This 8-axis EMCO Hyperturn 45 was manufactured in 2018. It features dual water-cooled integrated motor spindles with a maximum bar capacity of 45 mm and a powerful drive power of 15 kW for each spindle. The machine includes two 12-station radial tool turrets and a high-pressure coolant system. If you are looking to get high-quality turning and milling capabilities, consider the EMCO Hyperturn 45 turn-mill centre we have for sale. Contact us for further details. - CNC Control: Siemens Sinumerik 840D-sl / OPERATE with 22" Multi-Touch Display, emcONNECT, IPC with 240 GB, and ShopTurn dialog programming- Operating Hours (Machine on): 25,304 h 09 min 43 sec- Operating Hours (Ready for operation / automatic mode): 22,788 h 54 min 36 sec- Operating Hours (Production mode): 21,003 h 11 min 32 sec- Total Alarm Time: 2,625 h 48 min 54 sec- Number of Spindles: 2 (Water-cooled integrated motor spindles for main and counter spindle)- Drive Power (Main Spindle): 15 kW- Drive Power (Counter Spindle): 15 kW- Speed Range (Main Spindle): 0 - 7,000 rpm- Speed Range (Counter Spindle): 0 - 7,000 rpm- Spindle Nose (Main Spindle): DIN 55026 KK 5- Maximum Bar Capacity: 45 mm- Spindle Nose (Counter Spindle): DIN 55026 KK 5- Axes: 6 linear axes, 2 rotary axes (C-axis on main and counter spindle, TRANSMIT software included)- Y-Axis Travel: mm- Y-Axis Rapid Traverse Rate: 15 m/min- Tool Carriers: 2x 12-station radial tool turrets VDI 25 with directional logic (for up to 2x 12 driven tool stations)- Driven Tools Power: max. 4 kW at 2,080 rpm- Driven Tools Torque: 16 Nm constant- Driven Tools Speed Range: 0 - 6,000 rpm- Linear Scales: Absolute direct linear encoders (HEIDENHAIN) with sealing air on X1, Y1, and X2 axes- Workpiece Handling: Pneumatic finished-part catcher HT45 (max. part length 120/180 mm, max. part diameter 45 mm, max. weight 2 kg) with indexed conveyor belt (storage area 340 x 750 mm)- Spindle Extension: For DM45, including 3 reduction tubes (allows short bars up to 1,200 mm through the spindle)- Mist Collector: Mechanical oil mist separator REVEN (RECOJET-2), air throughput 1,000 m³/h, 250 W, connection diameter Ø160 mm- Electrical Connection: 3x 400V / PE, 50/60 Hz, Imax = 60 A, Supply line fuse 80 A gG/gL, Icw Gbsdpfj Ahzcijx Acijw

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: R6L211501, EMCO Turn S65 TM – 2-axis CNC lathe with EMCO SL1200 short bar loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4,200 rpm spindle speed - Linear guideway system - Digital drive technology - Direct spindle encoder - Sinumerik 828D with ShopTurn conversational programming Equipment - 12-position VDI 30 axial tool turret with direction logic for up to 12 live tooling stations (5 kW, 20 Nm, 0–5,000 rpm) - C-axis for main spindle - Mechanical spindle brake (minimum increment 0.01°) - Size 65 headstock with KK6 spindle nose (DIN 55026) - Hollow clamping cylinder incl. draw tube Gjdpoyzn H Usfx Aciebw - Machine lamp - Coolant system - Hydraulic power unit - Interface for chip conveyor - Documentation Other features - EMCO SL1200 short bar loader ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing solutions adapted to your needs. Whether down payment, installment plans, or individual financing models – together we will find a solution that fits. If you wish, we can also handle the complete logistics and transportation. From planning to punctual delivery, we ensure a smooth and reliable process, so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide personal and professional advice. ----- Subject to prior sale, errors, and changes.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Tool Milling Machine Emco C40 Linear with Digital Display and Path Control – Excellent Condition, Tool Holders, CE-Compliant! Technical Data: >> Year of manufacture: 2009 Machine No.: BA1GX1201 >> Milling table clamping area: 800 x 400 mm Number of T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm Gedpjyliffsfx Acijbw >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 taper >> Manual drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Folding machine enclosure >> Coolant system >> Machine lamp >> Tool trolley with tool holders About the machine: Offered is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in an almost mint condition. It comes from a government facility where it was only used minimally. The control system is very user-friendly. Switching from vertical to horizontal operation is very easy by simply swivelling away the vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to view and test the machine under power at our facility.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Godpfxjxzq Nco Aciebw Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, total height: 3,000 mm, total width: 2,330 mm, table load: 250 kg, overall weight: 9,200 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 20,000 W, tool weight: 8,000 g, product length (max.): 2,880 mm, number of axes: 5, This 5-axis EMCO MAXXMILL 500 was manufactured in 2016. It features a maximum spindle speed of 15,000 rpm and a tool magazine capacity of 40 tools, allowing for efficient machining operations. The machine includes a swivelling-rotary table with a clamping area of 600 x 600 mm and a maximum workpiece size for 5-side machining of 500 x 500 x 475 mm. If you are looking to get high-quality milling capabilities, consider the EMCO MAXXMILL 500 vertical machining centre. Contact us for further details. • B-axis (tilting): ±100° • C-axis rotation: 0–360° continuous • Rapid traverse X/Y/Z: 30 m/min • Max rotational speed B/C axes: 25 rpm / 25 rpm • Spindle nose to table distance: 150–650 mm • Max acceleration X/Y/Z: 3 m/s²Main spindle • Max torque: 100 NmWorking table • Type: Swivelling-rotary table • Clamping area: 600 × 600 mm • Max workpiece size for 5-side machining: 500 × 500 × 475 mm • T-slots: 5 • T-slot spacing: 100 mm • Table-to-floor distance: 776 mmTool changer • Magazine type/capacity: Drum magazine, 40 tools • Tool change system: Double-gripper arm • Tool-to-tool time: 2 s • Max tool diameter: 80 mm (125 mm without adjacent tools) • Max tool length: 250 mm • Max total magazine load: 100 kg • Tool management: RandomAccuracy (manufacturer nominal) • Positioning accuracy X/Y/Z: 8 µm • Repeatability X/Y/Z: 3 µm • B-axis positioning accuracy: ±20 arcsec • C-axis positioning accuracy: ±10 arcsecCoolant system • Tank capacity: 250 L • Standard pump pressure: 2 bar • Max flow at 2 bar: 40 L/minCondition, refurbishment, and status • Comprehensive refurbishment by specialist: • Complete refurbishment and installation/adjustment of swivelling-rotary table Gbjdo Ah H Nqspfx Aciew • Extensive cleaning and reconditioning • Installation and setup of workpiece and tool measurement probes • Automatic kinematic calibration (KINEMATIC AUTO) • Brand-new main spindle installed • Machine connected to power and operational • Milling test possible Additional equipment • Automatic workpiece probe • Laser tool measurement system • Through-spindle coolant system, 20 bar • Chip conveyor (chip discharge height: 1,100 mm) • Linear scales on X, Y, Z • Automatic machine door • Automatic kinematic system (KINEMATIC AUTO) • Oil supply for machining fixtures via rotary joint at table centre • Spare spindle available (inclusion in sale to be confirmed) Technical Specification Taper Size ISO 40

Year of construction: 2007, condition: used, X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible. Godpfsz Sr Nwex Aciebw

Condition: ready for operation (used), Year of construction: 2007, operating hours: 6,615 h, functionality: fully functional, machine/vehicle number: R2EV3403, turning length: 310 mm, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, bar passage: 45 mm, TECHNICAL DETAILS Work Area Godpfexvrv Tsx Aciobw Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Carriage Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle nose to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hollow clamping cylinder max. through bore: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning spread P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders to DIN: 69880 VDI30 Tool cross section for square shank tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / powered (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Footprint: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT - Integrated holding brake for driven tools - Disc turret with direction logic - AC motors on X and Z axes

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: Godpfx Acozcplysijbw - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered).

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 77 mm, turning diameter: 520 mm, center height: 260 mm, turning length: 1,500 mm, feed length X-axis: 310 mm, feed length Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 4 m/min, spindle mount: MK 6, EMCO LABOR E-260 SELF-LEARNING LATHE WITH FAGOR 8055 CNC, COMPLETE MACHINE WITH ACCESSORIES, MANUALS, AND CE DECLARATION CENTER HEIGHT: 260 mm DISTANCE BETWEEN CENTERS: 1500 mm MAXIMUM DIAMETER OVER BED: 520 mm MAXIMUM DIAMETER OVER CARRIAGE: 300 mm SPINDLE NOSE, CAM LOCK TYPE: 6" SPINDLE BORE DIAMETER: 77 mm SPINDLE POWER: 16.5 KW Gjdpfx Aco Aa Nicoisbw SPINDLE SPEED: 2500 RPM (2 RANGES) CNC: FAGOR 8055 MOTORS AND DRIVES: SIEMENS

Condition: excellent (used), Year of construction: 2019, MAXXMILL 750 5-SIDE UNIVERSAL MACHINING CENTER SIEMENS 840D SL, 15,000 RPM 5-Side Universal Machining Center with integrated tool magazine, 30 positions Control: Sinumerik 840D-sl / OPERATE o SHOPMILL dialog programming o USB interface o Network drive / Ethernet o 22" TFT color touch monitor o 3D simulation o EMCONNECT Spindle: Motor spindle, water-cooled Spindle power: max. 20 kW Speed: 50 - 15000 RPM Torque: max. 100 Nm Tool holder: ISO 40 DIN 69871 Drawbar: ISO7388/2 Type B (not included in the basic machine) Travel: X=750+50mm, Y=610mm, Z=500mm Spindle nose – table distance: 150–650 mm Rapid traverse X-Y-Z: 30 m/min B-,C: 25 RPM Table: driven by worm gear Cast table, ground with T-slots Number – Width – Spacing: 5 – 14 – 100 Clamping area: 750 x 600 mm Table load maximum: 300 kg Tool changer: Drum magazine with 30 tool positions. Tool change time (chip to chip): 4.9s (VDI2852) Standard equipment: o Advanced Surface (Siemens option) o LED work area lighting o Spindle air blow-out device for Gbsdpjz Anw Hofx Acisw cleaning the tool holder during tool change o Central lubrication o Coolant pump 2 bar o Coolant tank 250 liters o Leveling elements (5 pieces) o Tool magazine door for maintenance o Direct measuring system B-axis Year of manufacture: 2019 Machine no.: M-007.038.19 includes: 8AO-PRESET750SIE LASER DEVICE MARPOSS 8AO-VOLREMSIE630 ELECTRONIC HANDWHEEL 8AO-ADDREFMM750EI AIR - LIQUID COOLING 8AO-TRASPMM750 HINGED BAND CHIP CONVEYOR MM750 8AO-IMPLAVXX50 SPRAY GUN 8AO-COMM750XX01 STANDARD PACKAGING 8AO-MAGUT750XX05 TOOL MAGAZINE FOR 40 TOOLS MM750 8AO-CICMI750SIE AUTOMATIC WORKPIECE MEASUREMENT WIRELESS 8AO-SUPTAVOLAMM750 FRONT SUPPORT TABLE 8AO-APPLGRMM751 ROTARY TABLE THROUGH SPINDLE 8AO-PLU08S00119A AUTOMATIC LOADING DOOR RIGHT MM750 8AO-ILU08X00119A MACHINE ROOM FLUSHING 8AO-ROTTSIE750 GLASS SCALE 3 AXES X-Y-Z SIEMENS 8AO-TRASFUM750MM 40-POSITION MAGAZINE ISO40 ACCORDING TO DIN69872 8AO-COPSUPXX750 UPPER MACHINE COVER MAXXMILL 750 8AO-INTROB012 STANDARD HANDLING INTERFACE PROFINET 8AO-CIN250LMSIE KINEMATIC MEASURING CYCLE 8AO-APPLEN750SIE DIRECT MEASURING SYSTEM B AND C 8AO-MM7503D 3D DATA MODEL MaXXmill 750

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,215 mm, overall weight: 620 kg, controller manufacturer: SIEMENS, controller model: Sinumerik ONE, number of slots in tool magazine: 40, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements Gedpjx D E Hbjfx Aciebw • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: used, Year of construction: 2008, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2008 Control : Siemens 840D - Powerline Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Röhm KZZT-AF 65/6 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, Röhm KFD-HE 210 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Gsdpfx Acjz Hh A Isisbw Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Toolmeasurement:Automatic Measuringarm, Marposs Rawmaterialfeed:Barloader, EMCO TOP-Load 10-65 (TOP Automazioni ETL 10-65) Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, Bristol EF David Toolholder:Misc. static and driven toolholder Further Equipment:Spindlechiller

Condition: excellent (used), EMCO Hyperturn 690 MCplus Gjdpfx Ace Ahizgsiebw