Used Holzkraft Minimax Sc 4E 33 for sale (177)

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Dsdshk S Szepfx Ad Njut Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Year of construction: 2026, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech Dedpfx Adsc Uydas Njut All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Dedpfx Adehk S S Ee Neut Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2026, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s Dsdpfxsff Hdbj Ad Njut grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding work Motorised height adjustment of the working units with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Inlet height constant Models str l with infinitely variable, inverter-controlled brush speed: this enables the speed to be precisely adapted to the material, making them particularly suitable for sensitive materials. Unit for saw-cut optics optionally available Dimensions and weights Length approx. 1300 mm width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Suction nozzle diameter 2 x 150 mm Brushes diameter 190 mm length 300 mm revolution 1500 min-¹ Electrical data Drive motor power 2 x 3.0 kW Power feed motor 0,22 kW Input power 6,25 kW Supply voltage 400 V Dedpjff Hdiefx Ad Neut Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound power level Lw (idling without extraction) 65 dB(A) Sanding unit grinding width max. 300 mm Feed unit Feed speed 1 - 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Duedjcnw T Ijpfx Ad Nst Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterblock and planing knives - quick change system Tersa planing knife system enables knife change in seconds and particularly quiet operation Dodpfx Ajbuldysd Nsut Skew toothed steel infeed roller for constant and uniform wood infeed Extra long planing tables Large dressing fence can remain in position when opening the dressing tables. Rear opening dressing tables High machine weight Powerful industrial motor Robust cast steel construction Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm working width: 300 mm max. chip removal: 4 mm dimensions thicknessing table: 565 * 300 mm min./max. working height: 3/230 mm feed speed: 7m/min planer shaft diameter / planer knives: 72mm / 3 pcs. speed: 5200 rpm motor 400V/50Hz/S6 - 40%: 4,0kw (5,5PS) Suction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized planing fence Available ex stock Bitburg - immediately available-

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Duedjlht H Nspfx Ad Nst Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Djdpfxshk S Sts Ad Njut Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Raw air extractor Djdpfx Adjhk S Swj Njut ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 Duedpov Sk Nnefx Ad Njt 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Dedpfov Sk Tmex Ad Nout Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Dujdpfx Adshkztto Net Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm Dodpfx Adoci Tvho Nsut min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Duedpfx Adov Nhg Se Net Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: new, Table router HOLZKRAFT t 45c LL With table extension right and left, and extendable workpiece support ----- Technical data ----- Table size: 1,945 x 695 mm, max. spindle projection over table: 130 mm, Useful length of milling spindle: 100 mm, max. retractable milling cutter Ø: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Djdpfxsu U Rfps Ad Njut Motor 400 V: 6.6 HP / 5.0 kW, suction nozzle Ø: 2 x 120 mm - Special offer price - - new exhibition machine -

Condition: used, Year of construction: 2003, Table length: 2500 mm; Table width: 800 mm; Max. table stroke: 650 mm; Column offset: 1000 mm; Pressure shoe: 600; Grinding shoe length: 300 mm; Grinding shoe width: 150 mm; Sanding belt length: 6400 mm; Sanding belt width: 150 mm; Belt air-blast device: No; Upper belt cover: present; Belt speed 1: 18 m/sec; Belt direction: left/right; Weight approx.: 390 kg; Motor power: 3 kW; Extraction diameter: 2x100 mm Storage location: Duederc I N Sspfx Ad Net

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, Dedpfx Aovl Eynsd Nout drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Dedpfjw I U Nusx Ad Nsut Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION 21 drilling spindles with quick-change system; five quick-change chucks included in delivery Heavy-duty steel worktable; five quick-change chucks included in delivery Patented system for fast and easy adjustment of drilling depth via spiral disc Pneumatic drill head swiveling, allowing drilling in any position between 0° and 90° Fold-down cast iron side stops with round bar guide Side stops easily adjustable and lockable to millimeter scale using magnifier Height adjustment of drill head via counter Two positionable pneumatic clamping cylinders With a spindle center distance of 640 mm, it is possible to process two workpieces of 316 mm width each SCOPE OF DELIVERY Two pneumatic pressure cylinders Five quick-change chucks Two stop rails, each 1.5 m long Four fold-down stops for the stop rails One setting gauge for fine adjustment of the fold-down stops on the stop rails TECHNICAL DATA Dimensions and Weights Worktable length 885 mm Worktable width 332 mm Product length approx. 1015 mm Product width/depth approx. 990 mm Product height approx. 1270 mm Net weight approx. 260 kg Electrical Data Rated input power 1.5 kW Delivered power 1.1 kW Motor duty cycle S3 Connection voltage 400 V Mains frequency 50 Hz Noise Emission Sound pressure level 78.3 dB(A) Pneumatic Connection Working pressure 6 – 8 bar Spindle Maximum drilling width 640 mm Maximum drilling depth at 90°: 65 mm Number of spindles: 21 Spindle distance 32 mm Center distance first to last spindle: 640 mm Spindle spacing sufficient for two workpieces of 316 mm each Spindle speed: 2800 rpm Drill head swivel range: 0 – 90° Maximum workpiece height: 130 mm Extraction Extraction nozzle diameter: 80 mm Including optional accessories: Duodew I Uqlepfx Ad Nst 2 pcs. Additional pneumatic pressure cylinders for MDB 21/23/29 PRO 17 pcs. Quick-change chucks for MDB 21/23/29 PRO 1 pc. Setting gauge for rear fence distance for MDB 21/23/29 PRO 1 pc. Reference pin for line drilling for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Djdpfx Asw E Tz Eod Neut Tool clamping range: 0 – 20 mm Worktable rotation: ±60° Worktable length: 565 mm Worktable width: 315 mm Extraction port diameter: 90 mm Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: short-term Location: Saxony-Anhalt

Condition: new, Feeder Year of manufacture 2022 Dujdenvkhzspfx Ad Nst max. throat 1050 mm Feed rollers 3 pieces roller diameter 120 mm Roll width 60 mm Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2021, Feeder Year of manufacture 2021 max. throat 1050 mm Feed rollers 3 pieces roller diameter 120 mm Roll width 60 mm Duedpfx Adsnvkh Ej Net Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2021, Feeder Djdstmyq Rjpfx Ad Nout Year of construction 2021 max. throat depth 1050 mm Feed rollers 4 pieces Roller diameter 120 mm Roll width 60 mm Spring travel of the rollers 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Feed: dimensions LxWxH 750x300x570 mm, weight 33 kg Stand: dimensions 1100x320x300 mm, weight 42 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim Dujdpfx Ajwhui Aed Not