Used Holzkraft Minimax Si 400Es 32 M A for sale (216)

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi Fpodjlht Htepfx Ah Ijr High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: Fpedpfx Ahexnqyho Ior - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Fsdevyup Uepfx Ah Ijpr

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Fsdpfx Ahevyupzs Iepr

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Fodpfsvxr S Rex Ah Ispr

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Fpjdpsvwgc Uefx Ah Ijr

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Fedpfxsvwgaae Ah Iopr

Condition: used, Used machine Year of manufacture: 2022 Also suitable for small craft businesses for occasional use Combination sanding unit with sanding shoe for fine sanding Standard equipment includes inclined-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust mono-block steel machine body with tube reinforcement, robot welded, with work units mounted high for maximum rigidity Motorized height adjustment of the worktable with digital display Electronically controlled sanding belt oscillation Feed carpet driven by gear motor with two speeds Fpjdpsx Hbr Ijfx Ah Ijr Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers in front of and behind each work unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universal application for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Maximum working width: 950 mm Equipment details: Combination unit for calibration and sanding Inclined-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite backing Universal design for calibration and sanding work on solid wood, chipboard, and veneer Sanding belt length: 1525 mm Sanding belt width: 970 mm Feed speed: 4.5/9 m/min Workpiece height: min. 4 mm / max. 170 mm Motor: 7.5 kW Extraction port: 140 mm Dimensions (LxWxH): 1388 x 1545 x 1668 mm Availability: Approx. end of January 2026 Location: NRW

Condition: used, Year of construction: 2025, The Holzkraft HSE 5-520 KH log splitter is designed for convenient and safe splitting of short logs for home or semi-professional use. Its compact design and easy operation enable efficient work even in tight spaces. Ideal for firewood preparation. Splitting force: 5 tons Fpsdpfxswxc Dio Ah Ijr Splitting material length: max. 520 mm Splitting material diameter: max. 250 mm drive: Electric 230 V mass: about 50 kg

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Fpjdpfxoxz Ulzs Ah Isr Blade speed: 1550 m/min Flywheel diameter: 940 mm Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Blade guide: precision guide above and below Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2022 Length (product) approx.: 1350 mm Width/Depth (product) approx.: 585 mm Height (product) approx.: 1210 mm Weight (net) approx.: 162 kg Extraction nozzle diameter: 100 / 100 mm Longitudinal table length: 680 mm Longitudinal table width: 310 mm Height adjustment, longitudinal table: 130 mm Min. cross table height: 920 mm Connection voltage: 400 V Phases: 3 Ph Power type: AC Fpedpfx Aox Hbrzeh Ior Mains frequency: 50 Hz Power input: 2.1 kW Fuse protection: 10 A Abrasive belt length: 2270 mm Abrasive belt width: 150 mm Belt running speed(s): 16 m/s Sanding surface length: 770 mm Sanding surface width: 150 mm Availability: approx. end of January 2026 Location: NRW

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use Fpedecnw U Dopfx Ah Ijr For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Like-new condition Features and technical specifications: Total table length: 2720 mm Infeed table length: 1498 mm Maximum planing depth: 8 mm Fsdpfxewka Txs Ah Iepr Planer fence length: 1200 mm Planer fence height: 190 mm Swivel range of fence: 90 – 45° Dust extraction connection: Extraction port diameter (thickness): 120 mm Installation information: Required length: 2750 mm Required width/depth: 1604 mm Note on space requirement: Dimensions account for maximum travel paths or usable lengths. Electrical data: Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterhead: Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm Dimensions and weights: Length approx.: 2750 mm Width/depth approx.: 1500 mm Weight approx.: 720 kg Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2025, Feed with uniform speed without loss of strength Metal gearbox with hardened gears Metal cover of the feed rollers Right - and left-hand rotation Powerful motor Durable PU feed rollers Tripod with an extended arm as standard Individual tilt and adjustable for horizontal and vertical use With counter Model VSA 48 L Item No. 5115500 Technical data maximum unloading 1050 mm Number 4 feed rollers Roll diameter 120 mm Roll width 60 mm Travel of the roll 25 mm 8-speed Circulator Speeds 2 / 4 / 5.5 / 6.7 / 11 / 13 / 16,5 / 33 m / min. Motor output 0,75 kW Fjdpfx Aecnxmzsh Iepr Connection 400 V / 50 Hz Weight 65 kg

Condition: new, Year of construction: 2021, New machine Fpedpfx Asqrw Eroh Ijr Year of manufacture: 2021 For wood dust and shavings Designed for industrial/commercial use Motor: 2.2 kW IE 3 Speed: 2874 rpm Extraction port: 160 mm Filter area: 9.21 m² Pneumatic filter cleaning Sound pressure level: 73 dB(A) Nominal air flow: 1448 m³/h Vacuum: 2247 Pa Chip collection container: 2x165 l Dimensions (LxWxH): 1755x830x1654 mm Weight: approx. 274 kg Availability: short notice Stock location: Flörsheim

Condition: new, Year of construction: 2025, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 495*356 mm Cutting speed: 650/400 m/min Fjdpfsvk Sdkox Ah Iopr Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with stop: 321 mm Saw band length: 2562 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 550 watts/230 volts Weight: 80 kg Dimensions in mm: 610*445*1753 Extraction nozzle diameter: 100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Fpjdpsw E Tz Esfx Ah Ior Worktable rotation: ±60° Worktable length: 565 mm Worktable width: 315 mm Extraction port diameter: 90 mm Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: short-term Location: Saxony-Anhalt

Condition: new, Year of construction: 2025, Closed and safe sawing area for more safety due to legally prescribed saw protection device Anti-twist protection of the wood due to stamped barbs in the rocker Stable, torsion-resistant steel frame Trolley for easy transport Shock, scratch and weather resistant due to high quality powder coating Phase inverter Dimensions and weights Working height 700 mm Rocker support 740 mm Length approx. 1030 mm width/depth approx. 770 mm Height approx. 1095 mm Fedpfx Aehkz Hish Ispr Weight approx. 92,5 kg Drive Type of drive Electric motor with direct drive Electrical data Input power 5 kW Supply voltage 400 V Mains frequency 50 Hz Saw blade diameter 700 mm Cutting capacity Rocker roundwood 250 mm Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, Holzkraft Extractor RLA 210 For wood dust and shavings, designed for commercial use Item number: 5132100 Brand: Holzkraft Dimensions and weights Shavings collection volume: 2 x 165 l Nominal diameter of the external suction nozzle inlet: 200 mm Length: approx. 1755 mm Width/depth: approx. 830 mm Height: approx. 1800 mm Weight: approx. 259 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise emission Sound pressure level: max. 72 dB(A) Voltage flow: Nominal flow rate: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with low noise Space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Fedpehk Dfrjfx Ah Iopr Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor is delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece, washable and therefore with a long service life Filter is tested and approved as standard in an antistatic version according to category M-BIA Filter resistance monitoring via differential pressure cell, adjustable with a warning light on the unit Control box The fan is installed downstream of the filter. Equipment details With a new locking device for secure container positioning. Location: From stock, 54634 Bitburg - Available at short notice.

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Fedpfx Ahoi Dphte Iopr Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, For machining smaller parts, especially solid wood Simple and safe operation Combined sanding unit with sanding shoe for calibrating solid wood Control panel on the front side Standard with ribbed steel roller Ø 120 mm and hard sanding shoe with graphite coating on exchangeable insert Motorized height adjustment of the working table Electronically controlled sanding belt oscillation Manual star/delta start of the motor Mechanical measurement of the table position Ammeter for displaying the current consumption of the grinding unit Two feed belt speeds Electromagnetic brake Combination unit for calibrating and grinding Ribbed steel roller Ø 120 mm with height fine adjustment Hard grinding shoe with graphite pad Universal version for calibrating and sanding of solid wood Model BBS 630 C Fsdpfxscnw U Rj Ah Ispr Article-No. 5343065 Technical data working width 630 mm diameter of the working roller 120 mm sanding belt width 650 mm Sanding belt length 1600 mm Speed of the sanding belt 18 m/s Min./max. workpiece height 3/160 mm Feed speed 4,5 / 9 m/min. Motor power 5 kW / 400 V Gear feed motor 0,43 Height adjustment motor 0,18 kW Compressed air consumption 20 l/min. Operating pressure 5,5 bar Operating pressure belt blower 8 bar Suction pipe diameter 150 mm Suction capacity 3.000 m³/h Dimensions mm 600 x 1010 x 1500 mm Weight 770 kg Location: Comes to stock 54634 Bitburg

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Fodpohkz Hmsfx Ah Iopr Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, Chip extractor ASA 2803 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 120 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Idle speed 2950 min¯¹ Input power 2,2 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1,92 m² Noise emission Fsdpfehk S Sdox Ah Ispr Sound pressure level max. 87.5 dB(A) Volume flow Nominal volume flow 2800 m³/h Negative pressure max. 1900 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 1903 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 110 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data Idle speed 2950 min¯¹ Input power 1,5 kW Supply voltage 400 V Mains frequency 50 Hz Filter Fjdpfx Ahohk S Shj Ispr Filter area 1,92 m² Noise emission Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Negative pressure max. 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 4303 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Fedpfx Aehk S Sleh Ijpr Chip collection volume 2 x 215 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Input power 3,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2,4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Negative pressure max. 2000 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -