Used Holzkraft Minimax Si 400Es 32 M A for sale (215)

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Nedevwf Enopfx Ab Iecl

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin cross-cut shear: yes cross-cutting / flush sawing: yes Nedpfxsk Eai Ue Ab Iocl Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 1,000 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, power: 9 kW (12.24 HP), Equipment: scorer, Robust steel and grey cast iron construction • Standard with three speeds • Equipped as standard with NC control and 7-inch LCD display for setting all machine axes • Saw unit with permanently precise dual pivot segment guide, 6-year Holzkraft warranty on wear of pivot segments • Electrical positioning of cutting height and saw blade tilting • Scoring saw unit with separate scoring motor • Powerful industrial motors • Smooth-running and precise sliding table made of anodised aluminium with proven, permanently smooth ball contact system on hardened rails, 10-year warranty on wear of guide tracks • Large support surfaces thanks to standard table extension and width extension Ncsdpfx Abewz Nzys Isl • Grey cast iron saw table • Folding parallel fence with fine adjustment and round bar guide • Crosscut fence, extendable to 3200 mm, with two flip stops and eccentric clamp • Particularly large outrigger with material roller, extendable to 2400 mm • Side-swivelling saw blade pendulum guard with integrated extraction port • Optionally available: mitre fences extendable up to 1500 mm for mounting directly on the sliding table • Numerous equipment options for individual customisation

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Ncjdexw N Sbspfx Ab Iel Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Holzkraft FKS 550-3200 PRO sliding table saw 5200550 Heavy-duty sliding table saw with scoring unit Saw blade tilt and height adjustment is manual Max. cutting height 200mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ High dead weight ensures vibration-free running Large cantilever table with material roller Rip fence with round bar guide Extendable aluminum longitudinal fence with two folding stops 7.5 kW main motor mounted on robust cast iron frame Quadruple-mounted format sliding carriage made of anodized aluminum with high torsional rigidity Multiple locking device on the sliding table Table widening and table extension made of strong sheet metal as standard equipment Large pendulum protection hood can be conveniently swung up by means of a gas pressure spring Saw blade clamping via tool-free Rapid system TECHNICAL DATA: Dimensions and weights Length (product) approx. 3386mm width/depth (product) approx. 3703mm Height (product) approx. 1330mm Weight (net) approx. 1102kg Connection suction Suction port diameter 120mm Suction port diameter saw blade guard 80mm Electrical data Supply voltage 400V Mains frequency 50Hz input power 7,5kW Output power 6kW Motor speed 2800min¯¹ Sliding carriage and table sliding table length 3200mm sliding table width 416mm height of sliding table 890mm Table length 1255mm Table width 685mm Noise emission Sound pressure level 96,5dB(A) Circular saw unit Cutting width with rip fence 1450mm Max. Cutting width to the left of the saw blade 3200mm Saw blade inclination 90 - 45 Max. Cutting height 90°200mm Max. cutting height Cutting height 45°140mm Diameter saw blade 550mm Speed saw blade 2800/3665/4800 min¯¹ Scoring unit Diameter scoring saw blade 120 - 130mm Speed scoring saw blade 8000min¯¹ Nsdpfx Ajkknaasb Iocl Holkraft dealer - accessories available on request!

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Ncsdpfjiidnfsx Ab Isl Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued Ncedpfscnxa Ssx Ab Iol light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Ncjdpfx Abjv Nhg So Iel Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: new, Edge sanding machine KSO 150 M F 3 PRO Holzkraft Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Drive power: - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm - Worktable width: 280 mm - Table tilt: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. Nsdju R S Dzepfx Ab Iscl - new exhibition machine -

Condition: used, Year of construction: 2015, Stationary spindle moulder Table size: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3,500/7,000/10,000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction port diameter: 2x 120 mm Location: Nattheim Nodpfeyapvtsx Ab Iscl

Condition: good (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Nodpjwgz T Sofx Ab Iecl Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 210PM2219030008, type of input current: three-phase, filter area: 22 m², total height: 1,800 mm, total width: 830 mm, total length: 1,717 mm, overall weight: 290 kg, nominal flow rate: 2,262 m³/h, input voltage: 400 V, extraction nozzle diameter: 200 mm, noise level: 72 dB, power: 3 kW (4.08 HP), input frequency: 50 Hz, tank capacity: 2,165 l, Used system with slight damage/scratches on the machine housing. There is still some fine dust in the machine. Serial number: 210PM2219030008 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with little space requirement Nedpfx Aovu Dcyeb Iscl Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, making it flexible to use Large inspection openings Large-sized, mobile chip containers with clamps and chip collection bag Dust extractor already fully assembled when delivered, making it quick to use All models mobile For model RLA 210: Optimal chip distribution in the chip containers due to large Filter area Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, thus with a long service life Filter tested and approved as standard in antistatic design according to category M-BIA The fan is connected downstream of the filter Unit of measurement: piece Packaging unit: 1 Metal fan wheel Inspection opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Pre-equipped for connection of machine detection for up to 8 machines and slide controls Machine detection via potential-free contact Pneumatic cleaning (compressed air connection via standard plug, working pressure 4 - 6 bar)

Condition: new, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 115 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, rotational speed (min.): 4,500 rpm, rotational speed (max.): 4,500 rpm, power: 4.5 kW (6.12 HP), sliding table length: 3,200 mm, Equipment: motor brake, scorer, Sawblade tilt and height adjustment are manual. Heavy weight ensures vibration-free operation. Large outrigger table with material roller. Parallel stop with round bar guide. Extendable aluminum longitudinal stop with two folding stops. 7.5 kW main motor mounted on a robust cast iron frame. Four-bearing sliding table made of anodized aluminum with high torsional rigidity. Standard table extension and table extension made of heavy-duty sheet metal. Large pendulum guard can be easily raised using a gas spring. Quick and convenient sawblade changes thanks to the Rapid clamping system. Multiple locking mechanisms on the sliding table. Length approx. 3386 mm Width/Depth approx. 3600 mm Height approx. 1310 mm Weight approx. 800 kg Extraction connection. Extraction nozzle diameter: 120 mm Extraction nozzle diameter of sawblade guard: 80 mm Electrical data. Power consumption: 4.5 kW Connection voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level 96.5 dB(A) Nedowa I Ezspfx Ab Iocl Circular saw unit Cutting width with parallel stop 1300 mm Max. cutting width to the left of the sawblade 3200 mm Sawblade inclination 90 – 45° Max. cutting height 90° 115 mm Max. cutting height 45° 80 mm Sawblade diameter 350 mm Sawblade speed 4500 rpm Sliding carriage and table Sliding carriage length 3200 mm Sliding carriage width 416 mm Sliding carriage height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit Scoring sawblade diameter min. 120 mm Scoring sawblade diameter max. 125 mm Scoring sawblade speed 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner agreed upon with you.#####

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Ncedscnxayspfx Ab Ijl Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available - Nsdpfx Abocnwyde Iocl

Condition: new, Year of construction: 2026, Heavy machine base guarantees high torsional rigidity and vibration-free operation Better sanding results due to sanding belt oscillation via separate gear motor Oscillation optionally switchable Veneer edge sanding device with fine adjustment as standard Grooved infeed ruler for sanding veneer overhangs Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for utilization of the entire sanding belt width Height adjustment of the sanding table and sanding unit swivelling via hand wheels Height-adjustable additional table with suction device for grinding radii Optimum chip removal through extraction at the unit and at the cross table Automatic compensation of strip length differences due to spring-loaded strip tension Dimensions and weights Length approx. 1900 mm width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Suction socket diameter 120 mm Drive power Oscillating motor 0,25 kW Work table(s) Working table length 960 mm Working table width 352 mm Working table height adjustment 210 mm Ncedpfoff Ed Tsx Ab Ijl Cross table height min. 730 mm Electrical data Input power 3 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s grinding surface length 1050 mm Grinding surface width 220 mm Swivel 0 - 45 ° Oscillation stroke 20 mm Availability: Short term

Condition: new, Year of construction: 2026, Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding carriage made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminium sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Nodpfx Abocnxame Ijcl 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminium telescopic stop Angle adjustable With two professional folding fences Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminium sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm working length 1660 mm Cutting height max. 90° with scoring 100

Condition: as good as new (ex-display), Year of construction: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterblock and planing knives - quick change system Tersa planing knife system enables knife change in seconds and particularly quiet operation Skew toothed steel infeed roller for constant and uniform wood infeed Extra long planing tables Ncodpfxjbuldys Ab Iel Large dressing fence can remain in position when opening the dressing tables. Rear opening dressing tables High machine weight Powerful industrial motor Robust cast steel construction Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm working width: 300 mm max. chip removal: 4 mm dimensions thicknessing table: 565 * 300 mm min./max. working height: 3/230 mm feed speed: 7m/min planer shaft diameter / planer knives: 72mm / 3 pcs. speed: 5200 rpm motor 400V/50Hz/S6 - 40%: 4,0kw (5,5PS) Suction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized planing fence Available ex stock Bitburg - immediately available-

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm Ncedpfsci Tvhjx Ab Ijl suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Njdpfx Asr A Eq Rob Iecl Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, Year of construction: 2024, New machine Nedpfowb Eh Nox Ab Iocl Year of manufacture 2024

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 3000mm Nsdpfxjgr Ufho Ab Ijcl Table size: 960mm x 352mm Additional table: 330mm x 330mm veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 810mm Weight: 290kg

Condition: new, total length: 1,700 mm, total width: 1,000 mm, total height: 1,500 mm, table length: 900 mm, table width: 360 mm, input voltage: 400 V, grinding belt length: 2,580 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, • Sanding unit can be swiveled using a handwheel • The welded steel machine base guarantees high torsional rigidity and vibration-free operation • Oscillating sanding belt with separate gear motor for better sanding results • Oscillation can be optionally activated • Sanding sole with graphite coating for a longer sanding belt service life • Height-adjustable sanding table utilizes the entire sanding belt width • Additional table with extraction openings for sanding radii on the rubberized guide roller • Sanding sleeve device with attachable work table • The spring-loaded belt tension automatically compensates for belt length differences Technical specifications: Dimensions and weights - Length (product) approx. 1700 mm - Width/depth (product) approx. 1000 mm - Height (product) approx. 1150 mm - Weight (net) approx. 250 kg Extraction connection: - Number of extraction nozzles: 2 - Extractor nozzle diameter 100mm Worktable: - Worktable length 900mm - Worktable width 360mm - Worktable height adjustment 110mm Electrical data: - Supply voltage 400V - Mains frequency 50Hz - Oscillation motor power - Sanding unit power 0.11kW - Sanding belt length 2580mm - Sanding belt width 150mm - Belt rotation speed(s) 14m/s Ncodpswg Dy Isfx Ab Iel - Oscillation stroke 15mm - Sanding surface length 800mm - Sanding surface width 150mm - Sanding height max. 150mm - Sanding unit pivoting 0 – 90° Scope of delivery • 1x Sanding belt K100 • 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Onboard tool kit • Miter gauge If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will tell you the nearest dealer.

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Nsdpfxohp Rc Ie Ab Iscl Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2022, Stock saleYear of manufacture 2022Description:- Separate work table for solid wood and veneer sanding, manually swivelable by 45° or 35°- The stop for veneer sanding can be adjusted to 0,1 mm- Motorized height-adjustable sanding unit- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The welded steel machine stand guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate geared motor for better sanding results- Oscillation can be switched on as required- Abrasion-resistant and highly gliding plastic tracks on the work table surface- Sanding soleplate with graphite coating for a longer service life of the sanding belt- The spring-loaded belt tension automatically compensates for belt length differences- Rubberized and grooved sanding drum- Convenient operation from two sides on the rotating control panel above the machine- Centrally positioned holder for feed unitTechnical data:Dimensions and weightsLength (product): approx.1820mmWidth/depth (product): approx.1050mmHeight (product): approx.1470mmWeight (net): approx.400kgDrive powerPower oscillation motor: 0.38kWSuction connectionSuction nozzle diameter: 150mmWork table(s)Work table length: 1000mmWork table width: 280mmTable swivel: 45 / 35°Electrical dataSupply voltage: 400VMains frequency: 50HzSanding unitSanding belt length: 2640mmSanding belt width: 150mmBelt speed(s): 14m/sOscillation stroke: 20mmSanding surface length: 890mmSanding surface width: 150mmSanding height max.150mmScope of delivery:1x edge sanding machine KSO 150 M F 3 PRO1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmon-board toolmitre fence Njdsvwfa Sopfx Ab Ijcl