Used Machinery for sale (85,299)

Condition: used, Year of construction: 1987, operating hours: 30,463 h, functionality: fully functional, track width: 1,900 mm, number of previous owners: 1, Equipment: cabin, crane, low noise, RSTW, year of manufacture 1987 / Crane ASX II, 1998 Track width: 1.9 m Cabin on the right side Lhjdpfxezv N Dbj Amzen Crane positioned in front of the cabin Four-wheel drive Equipped with a timber bunk Equipped with a trailer Equipped with rails and concrete slabs

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K, 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. Lhjdpfx Aozv Trcjmzsn This system is ready after completing our full maintenance programm. This machine is therefore ready for a demo! Year of built 2013 6 station base Configuration: Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Lsdezx Ri Dopfx Amzehn Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2019, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 800 mm, suspension: air, tire size: 235.75 r 17.5, color: traffic orange, Year of construction: 2019, Equipment: ABS, Moeslin low-bed semi-trailer with gooseneck, used, with ramps, 3 axles with 3rd steering axle, air suspension, EBS, prepared for removable rear ramps, 120 cm front headboard, 5 ton side RUD collar hooks, twist locks for 20+20, 40 and 45 ft containers, 3 through cross-members for stanchion seats, 2 PVC toolboxes, ground clearance 84 cm, year 2019. Dealer: INTERDRIVE SRL-PARMA. Lhsdpfxjxnqvcs Amzsn

Condition: excellent (used), functionality: fully functional, Complete machine park for sale, consisting of: Holzher machine park in like-new condition (in operation since 6/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m), Nextec 7705 nesting machining center, Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009), including waste conveyor (new, in operation since 6/2024). Nestro dust extraction system (in operation since 06/2024), consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h), briquetting press, shredder, piping for all machines, various pipe diameters. Mobile dust extraction unit Holzkraft RLA160, 2x mobile dust extraction units ASA2553 or similar. Ledpezh Hw Aofx Amzehn 2x Renner compressors, each 7.5 kW (1x new, in operation since 06/2024). 1x Ayen multiple drilling machine, special construction with 2.5m stop rail. 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014), 2x electric high-lift pallet trucks Toyota/BT (year of manufacture), 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025). Various work tables, templates, pallet racks, material carts, etc. BeA various nailers & staplers. Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Bench drill Stürmer. Festool table saw. Bosch large panel miter saw on stand. EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection). If you are seriously interested, we can gladly provide pictures and details of the individual items.

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Lsdpfjzwd Dxjx Amzshn Being replaced by a new Baljer & Zembrod unit. Epsilon E380 crane. Concrete weights will be removed.

Condition: repair required (used), Year of construction: 2003, functionality: fully functional, total length: 7,000 mm, number of previous owners: 1, The stepped slide is fully functional and was in operation until the plant was converted. The system is being sold as in need of overhaul. There is wear and tear on the mechanical guides and drive elements, consistent with its age. Welding and maintenance work are recommended for its long-term reuse. It is ideal as a cost-effective project for refurbishment or as a robust source of spare parts. Lsdszwpxzjpfx Amzshn

Condition: used, Year of construction: 2019, Corpus press Manufacturer: LINYI JIANZHONG WOOD MACHINERY Type: JJZ-CP Year of manufacture: 2019 The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The feeding and removal of the glued elements are carried out automatically via powered roller conveyors. Technical data - Max. pressure 500 t (adjustable) - Max. filling height 1300 mm - Min. filling height 900 mm - Max. filling size 1300 x 2500 mm - Press dimensions 3600 x 1370 x 4500 mm - Press placement approx. 500 mm below floor level - Feeding table 2000 x 1960 mm - Receiving table 2350 x 2500 mm - Max. power 13.2 kW - Weight 12000 kg - CE marking Lhedjzuzwkspfx Amzon - Capacity: 6 batches per hour 2 corpus presses are available for sale. Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications Lodpfeztqrnsx Amzjhn _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller Lhsdpsz Ea E Sofx Amzen • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. Lhsdpfx Aoz Ea Itsmzsn • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ Lodpfx Aez Ea I Tomzshn MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Condition: new, Year of construction: 2026, functionality: fully functional, Baljer & Zembrod Diameter Reduction Units • Used to reduce the diameter of logs over their entire length to a specified diameter (e.g., 60 cm). • Cutter lengths: 420 mm to 1500 mm • Log lengths up to 7 meters • Log centering on the log’s center for maximum yield Lsdpfx Amsz R Iy Njzshn • Clamping device for the end faces of the log, with a rotary table; clamping frame is hydraulically adjustable.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 10,500 kg, maximum load weight: 28,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2004, next inspection (TÜV): 09/2027, total length: 13,450 mm, total width: 2,550 mm, total height: 850 mm, suspension: air, tire size: 215.75 r 17.5, color: red, trailer brake: trailer braked, Year of construction: 2004, Equipment: ABS, Used extendable Nooteboom lowboy semi-trailer, 3 double axles with air suspension, steerable 3rd axle, ABS, ride height adjustment valve, extendable frame with an additional 4.0m, extending from 9.40m to 13.40m, ground clearance 85cm, lateral anchor points, lateral widening extensions, lateral king pin locations, steel and wood deck, single manually operated ramps, inclined rear section, rear outriggers, container locking devices for: 1x20-1x30-1x40-2x20-1x45 containers, removable side rails on the gooseneck, year 2004, loading tracks for railway cars, inspected until 30.09.2027 - INTERDRIVE SRL DEALERSHIP - PARMA. Lhedsz S Ncnepfx Amzon

Condition: used, Year of construction: 2001, functionality: fully functional, year of last overhaul: 2017, total width: 1,300 mm, total length: 7,000 mm, operating pressure: 90 bar, total height: 3,000 mm, empty load weight: 7,000 kg, number of previous owners: 2, Bruks root reducer / stem reducer – stem lengths up to 6m, 100 m/min feed rate, fully overhauled in 2017. I am offering a powerful and reliable Bruks root reducer, which is ideal for use in log yards and sawmills. The machine underwent a complete overhaul in 2017. The machine was operated in a system with a feed rate of 100 m/min. Price on request. Lsdpfx Aszufkzomzehn

Year of construction: 2014, condition: good (used), Machine details Manufacturer: CARTES Model: GT 363 HSD Year: 2014 Machine type: Label finishing / embellishment / converting machine Maximum material width: 360 mm Maximum print / working format: 340 x 320 mm Maximum speed: up to 15,000 cycles/hour Machine layout dimensions: approx. 8,288 mm length x 1,628 mm width/depth x 2,148 mm height Status: Machine is still in production until approx. the end of the year Reason for sale: Replacement by a faster machine _____ Configuration The machine is equipped with the following units: • Unwinder • Corona pretreatment • Flat hot foil stamping unit • 2 x transverse flat hot foil units • 1 x longitudinal foil guide • Foil unwinding 1” • Foil rewinding 3” • Flat screen printing unit Lhodpezkavdjfx Amzen • UV-Ray UV curing unit • Flat die-cutting unit • Matrix rewinding, 3” / 76 mm core • Edge trimming knives • Backside slitting / backside scoring • Razor blades for longitudinal slitting • 2 x rewinding shafts, 3” _____ Accessories included • 2nd plate for hot foil stamping • 2 plates for embossing / relief stamping _____ Service and condition The machine is currently still in operation and is reported to be in good working condition. A technical service was carried out by a Dortschy technician in October 2024. FGT condition rating: 8/10 ★★★★★☆☆ This rating is based on the year of manufacture, the current production status, the recent service and the overall configuration of the machine. Final condition remains subject to inspection, technical confirmation and video review. _____ Main advantages • Attractive price compared to the original new price of approx. EUR 244,500 • Strong configuration for premium label finishing • Hot foil stamping and embossing capability • Flat screen printing unit for special effects and high-value applications • UV curing system included • Flat die-cutting unit included • Matrix removal, slitting and rewinding included • Still in production • Recent service in October 2024 • Compact and complete finishing solution for label converters

Condition: good (used), Year of construction: 2011, functionality: fully functional, Manufacturer: OMET S.r.l., Italy Model: MP Advanced Machine Type: Flexographic Plate Mounter Year: 2011 Serial No.: 1487 MPA Working Width: approx. 430 mm Condition: Good used condition FGT Condition Rating: ★★★★★☆☆ 8/10 Availability: Immediately available Lhjdpfxozkawuj Amzsn Why this machine is interesting The OMET MP Advanced is designed for accurate and repeatable mounting of flexographic printing plates. Its dual-camera positioning system supports precise register preparation and can significantly reduce press setup time, start-up waste, and register corrections. This is a particularly attractive solution for narrow-web label and packaging printers looking to improve efficiency through offline plate preparation. Main Configuration • Dual-camera positioning system • Two independently adjustable camera units • Central operator monitor • Digital position displays • Precision linear camera movement • Plate cylinder mounting section • Mechanical cylinder support system • Adjustable positioning components • Robust industrial machine frame • CE marked Suitable Applications Ideal for: • Self-adhesive labels • Paper and film labels • Flexible packaging • Multi-color flexographic printing • Narrow-web converting applications Main Benefits • Accurate plate positioning • Improved register repeatability • Faster job preparation • Reduced press downtime • Lower start-up waste • Offline cylinder preparation • Reduced operator-dependent mounting errors Scope of Supply • OMET MP Advanced plate mounter • Dual-camera system • Central monitor • Digital positioning displays • Cylinder mounting and support section • Standard equipment as installed Additional adapters, sleeves, cylinders, or tooling are subject to separate confirmation.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Ledpfsy Ul I Asx Amzshn Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production.

Condition: good (used), Year of construction: 2019, Manufacturer: INK SYSTEMS Lhjdpfx Aezmhbgomzjn Model: Soft Sonic IS Compact 1300 Hybrid Machine Type: Hybrid Ultrasonic Anilox Roller Cleaning System Year: 2018 Maximum Working Length: approx. 1,300 mm Condition: Good used condition FGT Condition Rating: 8/10 Availability: Subject to prior sale Why this machine is of interest Clean anilox rollers are essential for stable ink transfer, consistent color density, and reproducible flexographic print quality. The IS Compact 1300 Hybrid is designed for professional and efficient cleaning of anilox rollers. Its hybrid cleaning concept offers an attractive solution for label and packaging printers seeking to remove dried ink residues and contamination from engraved anilox cells while reducing manual cleaning effort. For a flexographic printing company, this can directly support: more consistent ink transfer, improved print quality, recovery of effective anilox cell volume, reduced manual cleaning time, longer service life of valuable anilox rollers. Main Technical Data & Configuration Professional anilox roller cleaning system Hybrid cleaning technology Ultrasonic cleaning principle Suitable for anilox rollers up to approx. 1,300 mm Controlled cleaning process Designed for professional industrial use Suitable for regular maintenance cleaning Compact machine design Closed cleaning concept Year of manufacture: 2018 Suitable Applications Ideal for: Label printing companies Narrow- and mid-web flexographic printers Flexible packaging production Folding carton applications Industrial flexographic printing Regular maintenance of anilox rollers

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, High-performance root reducer for installation in a cross-flow conveyor system Log lengths from 2.80 m to 22 meters Standard milling shaft length 1020 mm Ledpfjzv Rhhox Amzjhn with top pressure device (powered chain prism) Robust design, also available as a twin-shaft or long-timber version Optional: 1200 mm or 1500 mm milling shaft 90 kW drive Central lubrication

Condition: good (used), Year of construction: 1985, functionality: fully functional, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3 mm, Equipment: cabin, crane, For sale is a Wolf-Wagen, formerly used by a school. It has few operating hours and is in very good condition! Sold on behalf of a customer! - Miter saw - Measuring device Lhsdpfezau Smsx Amzsn - Cut-to-length system - Gripper

Condition: good (used), Year of construction: 2002, OMET Varyflex 520 Year of manufacture: 2002 Web width: 520 mm Printing process: Servo-driven flexo (sleeve technology) Condition: Used – good working condition Location: Europe _____ Machine Configuration • 8 x flexo printing units (servo-driven, sleeve system) • Drying system: 7 x UV LED + 1 x conventional UV • Water-based ink compatible • 2 x die-cutting stations • 1 x additional die-cutting unit for sheet-off system • Sheet delivery with evacuation conveyor • Cold foil unit • In-line slitting system (scissor type) • Double rewinder (dual shaft) • Web inspection camera system • Chilled impression drums • Integrated chiller unit • Ink preheating system _____ Equipment & Tooling Lhjdpfoyyn Ipsx Amzen • 5 sets of sleeves • 12 anilox rollers • 5 magnetic cylinders _____ Technical Highlights & Advantages This OMET Varyflex 520 offers a very flexible configuration, making it suitable for a wide range of label applications.

Condition: good (used), Year of construction: 2008, OMET Year of manufacture: 2008 Printing process: UV flexo Condition: Used – very good condition (single owner) Location: Italy _____ Machine Configuration • 8 x UV flexo printing units • UV curing system • 2 x die-cutting stations • 1 x Gap Master system • 1 x additional die-cutting unit for sheet-off • Sheet delivery with evacuation conveyor • Turn bar (web turner) • 3 x corona treatment units • Chilled impression cylinders with integrated chiller • Suitable for adhesive label printing _____ Equipment & Tooling • 3 sets of tooling • 10 anilox rollers • 3 magnetic cylinders _____ Technical Highlights & Advantages This OMET Flexy 330 offers a robust and versatile configuration, ideal for a wide range of label applications. Key advantages: • 8-color configuration for high flexibility • Corona treatment for improved ink adhesion • Chilled impression cylinders for consistent print quality • Well-maintained machine from single owner • Currently in production – inspection and testing possible Lodoyyn Snopfx Amzehn This machine represents a cost-effective solution for converters seeking a flexible and efficient printing line. _____

Condition: good (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, track width: 3,000 mm, Equipment: crane, low noise, BZH sorting and cutting trolley. Track gauge: 3m. OBX 2 crane. Lodpfjzycf Tex Amzohn Lifting capacity at 13.20m: 2200kg without grapple. Chainsaw on the right side. Crane positioned in front of the cab. Grapple. Sold separately.

Condition: good (used), Year of construction: 1997, functionality: fully functional, Technical Offer – Gallus EM 410 S Manufacturer: Gallus Ferd. Rüesch AG / Arsoma Druckmaschinen GmbH Model: Gallus EM 410 S Year: 1997 Incoterm: FCA FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is interesting The Gallus EM 410 S is one of the most successful servo-driven UV flexographic presses ever built for the narrow web label industry. Thanks to its modular design, high production speed, and comprehensive inline converting equipment, it is perfectly suited for self-adhesive labels, flexible packaging, filmic materials, and premium label applications. Delivered complete with printing cylinders, anilox rolls, and magnetic cylinders, the machine offers an excellent opportunity to start production immediately while significantly reducing tooling investment. _____ Technical Specification • 8 UV Flexographic Printing Units • Web Width: 410 mm • Maximum Printing Width: 410 mm • Mechanical Speed: Up to 150 m/min • Print Repeat: Approx. 254–648 mm (depending on cylinders) • UV Flexo Printing (Front & Reverse) • Servo-Driven Technology • Electrical Supply: 400 V / 50–60 Hz / 3 Phase / 80 A Web Handling • Unwinder for rolls up to 800–1,000 mm • Maximum Unwind Diameter: 1,000–1,250 mm • Double Rewinder • Maximum Rewind Diameter: 800–1,250 mm • Automatic Electronic Web Guide (E&L or equivalent) Drying & Finishing • IST Metz UV Drying System • Corona Treatment Lodpfoznwhrox Amzjhn • Teknek Web Cleaning System • Turnbar System • 2 Rotary Die-Cutting Stations with GapMaster • Inline Laminating Unit Quality Control • SES SensoTec Register Control System • Register Accuracy: ±0.1 mm • OkiSystem Sentinel Defect Detection System Printable Materials • Paper • PE Films • PP Films • PET Films • Self-Adhesive Materials • Lightweight Carton _____ Included Equipment • Complete set of Printing Cylinders • Complete set of Anilox Rolls • Magnetic Cylinders • Automatic Web Guide • Turnbar • Corona Treater • Teknek Web Cleaner • 2 × Rotary Die-Cutting Stations with GapMaster • Inline Laminating • IST Metz Multi-Lamp UV System • Double Rewinder • Register Control • Defect Detection System _____ Main Advantages • Proven Gallus servo-driven technology • High production speed up to 150 m/min • Complete inline converting configuration • Extensive tooling package included • Modular platform compatible with Gallus EM 260 / EM 410 / EM 510 • Ready for immediate production with minimal additional investment _____ The machine can be inspected while running. Should you require further information, additional photographs, or wish to arrange an inspection, please do not hesitate to contact us. We look forward to hearing from you.