Used Machinery for sale (85,294)

Condition: used, Year of construction: 1987, operating hours: 30,463 h, functionality: fully functional, track width: 1,900 mm, number of previous owners: 1, Equipment: cabin, crane, low noise, RSTW, year of manufacture 1987 / Crane ASX II, 1998 Track width: 1.9 m Cabin on the right side Crane positioned in front of the cabin Ledpfx Aaezv N Dbe Isru Four-wheel drive Equipped with a timber bunk Equipped with a trailer Equipped with rails and concrete slabs

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K, 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system is ready after completing our full maintenance programm. This machine is therefore ready for a demo! Year of built 2013 6 station base Configuration: Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station Lodpfx Aaozv Trco Ieru This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Being replaced by a new Baljer & Zembrod unit. Epsilon E380 crane. Ljdszwd Dxjpfx Aa Ijru Concrete weights will be removed.

Condition: repair required (used), Year of construction: 2003, functionality: fully functional, total length: 7,000 mm, number of previous owners: 1, The stepped slide is fully functional and was in operation until the plant was converted. The system is being sold as in need of overhaul. There is wear and tear on the mechanical guides and drive elements, consistent with its age. Welding and maintenance work are recommended for its long-term reuse. Lrodpfx Aaszwpxzo Iou It is ideal as a cost-effective project for refurbishment or as a robust source of spare parts.

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press Lredpsx Hh A Hofx Aa Iou • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, working width: 1,650 mm, wire diameter (max.): 7 mm, Schlatter MG930, quick change, DC welding machine with 5 DC transformer, 1092 kVA. Schlatter control from 2007 with S7-300 PLC. Automatic line wire loader up to 3m, automatic line wire channel positioning, open portal DC welding machine, quick change cross wire hopper, MLV1 pullout and stacker. Lrjdszd Sulepfx Aa Iju

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², volume flow: 50 m³/h, total width: 2,450 mm, total length: 8,500 mm, total height: 9,000 mm, warranty duration: 12 months, Equipment: documentation/manual, BAG FILTER - GALVANIZED STEEL STRUCTURE Lsdpfx Ajzfiy Ija Ioru AIRFLOW RATE m³/h 50,000 FILTER FABRIC CLEANING VIA AIR JET WITH CONTROL UNIT FILTER FABRIC AREA m² 512 No. 04 ATEX-CERTIFIED ANTI-EXPLOSION PANELS FILTERED MATERIAL DISCHARGE - SCREW CONVEYOR - ROTARY VALVE UPPER GUARDRAIL - SAFETY LADDER CONTROL PANEL No. 01 ELECTRIC FAN - kW to be defined with the user

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System Ljdoy Tybnepfx Aa Ioru SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2015, MPS EB 370/8 8-Color Full Servo UV Flexo Multi-Substrate Press Machine Details Manufacturer: MPS Model: EB 370/8 Year of manufacture: 2015 Web width: 14.5” / approx. 370 mm Gearing: 1/8” Printing units: 8 x flexo printing units Machine type: Full servo UV flexo multi-substrate press Condition: Excellent, “like-new” condition Technical Configuration 8 x UV flexo printing units 8 x chill rolls 8 x doctor blade assemblies Automatic impression throw-off Constant circumference anilox rolls Drop-in shaftless bearer-style plate roll technology Electronic edge guide Web cleaning system Video web inspection system 2 x video web inspection monitors Water chilling system Drying System 8 x GEW EDX single-lamp UV units Unwind / Rewind 1 x unwind Ledoy Tyubopfx Aa Isru Maximum unwind diameter: 40” 1 x product rewind Maximum rewind diameter: 40” 1 x waste rewind Finishing Equipment 2 x die stations 2 x removable base rolls 1 x sheeting station 1 x laminator Cold foil stamping 1 x turn bar 1 x stacker Accessory rail system with mounted turn bar Lamination unwind / rewind with lay-on roller Tooling / Accessories Anilox rolls Plate cylinders Magnetic die cylinders Significant inventory of tooling 1 set of Hydrajack die pressure gauge assemblies

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Lrodpfx Aszul Sfja Iou

Condition: used, Used Charles Thompson model CT400 Hastelloy C22 Mobile Agitated Nutsche Filter Dryer Lsdpfx Ajzun Hlja Ijru Manufacturer: Charles Thompson Limited, UK Model: CT400 Type: Mobile agitated Nutsche filter/dryer Year: 2001 Filter diameter: approx. 400 mm / 15.7 in Filtration area: approx. 0.125 m² / 1.35 ft² Product-contact material: Hastelloy C22 External/jacket: 316L stainless steel Shell design: 3 bar/full vacuum Jacket design: 3 bar/full vacuum Design temperature: -30°C to +100°C ASME: Section VIII Div. 1 (1998) + A99 Empty weight: 570 kg / 1,257 lb Agitator: single-blade, approximately 0.75 kW Agitator lift: hydraulic raise/lower Configuration: jacketed vessel on mobile stainless frame/casters.

Condition: used, Year of construction: 2019, Corpus press Manufacturer: LINYI JIANZHONG WOOD MACHINERY Type: JJZ-CP Year of manufacture: 2019 The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The feeding and removal of the glued elements are carried out automatically via powered roller conveyors. Technical data - Max. pressure 500 t (adjustable) - Max. filling height 1300 mm - Min. filling height 900 mm - Max. filling size 1300 x 2500 mm - Press dimensions 3600 x 1370 x 4500 mm - Press placement approx. 500 mm below floor level - Feeding table 2000 x 1960 mm - Receiving table 2350 x 2500 mm - Max. power 13.2 kW - Weight 12000 kg - CE marking - Capacity: 6 batches per hour 2 corpus presses are available for sale. Lsdpfx Aaozuzwke Ieru Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability Lredpfx Aaoztqlzo Ieu • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line Ledpfx Aajztqrno Ioru • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Variable Speed Pulley Lrodoztr Nuspfx Aa Iou Used #10 Dies

Condition: used, functionality: fully functional, thread length: 100 mm, overall weight: 4,400 kg, type of input current: AC, metric thread diameter (max.): 8 mm, Equipped with Vibratory Bowl & Helpro Process Monitor Lredpfx Aajzt S Hae Isu

Condition: used, Year of construction: 1983, functionality: fully functional, Equipped with : Wire Straightener , Bushing Cutoff, PKO 1-3, IFO Transfer, Variable Speed and Separate Tool Lube Lsdpezt S Tgofx Aa Ieru

Condition: good (used), Year of construction: 1995, Gallus R200B Manufacturer: Gallus Ferd. Rüesch AG, Switzerland Model: Gallus R200B Year: 1995 Configuration: 8-Color UV Letterpress Incoterm: FCA (Free Loaded on Truck) FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is of interest The Gallus R200B has earned an outstanding reputation within the label industry thanks to its robust Swiss engineering, exceptional print quality, and long service life. Ledpfx Aaoznwqgo Ijru Even today, it remains a highly reliable production press for self-adhesive labels and specialty applications. A particular highlight of this machine is its extensive package of original Gallus tooling, including a large quantity of printing cylinders, anilox rollers, magnetic cylinders, and die-cutting cylinders. This significantly reduces the investment required for a new owner while providing maximum production flexibility from day one. _____ Technical Specification • 8 UV Letterpress Printing Units • Approx. 200 mm Web Width • UV Drying System • Automatic Unwinder • Automatic Rewinder • Rotary Die-Cutting Station • Matrix Removal System • Automatic Web Guide • Electronic Register Control • Touch Screen Operator Panel • Gallus Ink Control System • Pneumatic Web Tension Control • Calvatron Corona Treatment System • Complete Electrical Cabinet • Operator Platform _____ Included Tooling & Accessories • Extensive package of Printing Cylinders • Large quantity of Anilox Rollers • Large selection of Magnetic Cylinders • Numerous Rotary Die-Cutting Cylinders • Various Repeat Sizes • Tooling Storage Racks • Spare Tooling • Ink Roller Storage Rack • Electrical Cabinet • Corona Treatment Unit • Operator Platform _____ Main Advantages ✔ Proven Swiss Gallus engineering ✔ 8-color UV letterpress configuration ✔ Excellent print quality for self-adhesive labels ✔ Extensive original tooling package included ✔ Immediate production capability ✔ Reliable mechanical construction with low maintenance costs ✔ Excellent availability of spare parts ✔ Ideal machine for label converters seeking a cost-effective production solution _____

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems Ljdpfsy Ufgrjx Aa Ioru A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: Ljdpfx Asy Ufgxsa Ioru The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts.

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into Lrjdpfx Aaovwkhne Iju smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitters  Rewinders  Splice table

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, heavy duty construction Lredpfx Aaou N Ac Se Ieu Equipment from 2019

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm Ledjvr Hf Eepfx Aa Ieru gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Year of construction: 2018, condition: like new (used), GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control Lsdsncfukjpfx Aa Ioru  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal  Laminating  Cold foil stamping  Labelshifter  Punching length: 609,6mm  Lattice proofing  manual knife box  Automatic Turret  2 x spindle

Condition: used, Trailers, construction equipment trailers Ljdpfx Asn Uy Awoa Isru -Handover: in its current condition as inspected -Note: Vehicle registration document missing, electrical wiring missing/damaged -Trailer: Construction machinery trailer -Loading area: 2220/1085/H420 mm, rim height 410 mm -Overflow device: Tap type ABV25. 1DZKE 2010 to 2500 kg -Support load: 100 kg -Dimensions: 4175/2030/H980 mm -Empty weight: 650 kg