Used Mep Bandsaw for sale (145)

Condition: new, saw blade diameter 350 x 32 mm Guodpfxexaab Se Ahzod capacity degrees: round 1 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 180 x 95 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: round .0 mm capacity 60 degrees: square x mm capacity 60 degrees: flat x mm

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) Godsxaa H Ispfx Ahzsud - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, saw blade diameter 130 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round 115 mm Gjdpshpktyefx Ahzeud capacity 45 degrees: square 100 mm capacity 45 degrees: flat 120 x 100 mm engine 3,3 / 4,4 KW 0 1400 / 2800 U/min weight of the machine ca. 1060 kg dimensions 2,5 x 1,8 x 1,85 m TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen.

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Gsdpfx Ahjfg E Ibszjud Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 15 - 150 U/min total power requirement 5,5 kW weight of the machine ca. 0,615 t dimensions of the machine ca. 1,4 x 1,4 x 2,0 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. Basic equipment: •Saw head slides on recirculating ball linear double guides •Three-stage gearbox •continuously variable speeds 15-150 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material Gedofg Rldjpfx Ahzeud •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 370x32x3 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,285 t dimensions 1,2 x 1,4 x 1,4 m Godpfx Ahsfc T Ugozeud Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left.

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm Gjdpfxjl R Nnne Ahzsud clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 10/95 mm capacity 45 degrees: flat 135x60 mm engine 2,5 0 1700 / 3400 U/min weight of the machine ca. 600 kg dimensions 2,0 x 1,5 x 1,7 m Gjdpofg Rlgsfx Ahzsud COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, for sawing of aluminum and light metal alloys for the use of HM circular saw blades. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw machines with the new one specially designed by MEP for Automatic machines developed, Windows “CE” based control

Year of construction: 2001, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Table rotateable left and right Manual feed Gedpfx Ahsygin Njzjud

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Gsdpfxsul Svlo Ahzsud The machine is fully refurbished and tested.

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Gjdpfx Ahsuwrv Dezoud

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. Gsdpewigavofx Ahzeud 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Cutting angle: from -45° to +45° Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Gjdpswu Tz Rjfx Ahzeud Touchscreen Machine weight: 605 kg

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm Gujdpfjfg E H Dsx Ahzod cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. Guodpfefm T Hbox Ahzed 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Guedpfx Ahjfg E Hzjzjd Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray Gsdpfx Ahsfg Rlbszeud •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Guedsfg Rlcepfx Ahzjd Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, Bandsaw MEP Model: SHARK 330 CNC FE Year: 1996 Condition: Refurbished Cutting capacity at 0 degrees: round: 260 mm – square: 230 mm – rectangular: 330x230 mm Cutting capacity at 45 degrees left: round: 240 mm – square: 200 mm – rectangular: 230x200 mm Blade dimensions: 3150x25.4x0.9 mm Cutting speed: Slow: 36 m/min – Fast: 72 m/min Gujdpfjyk Unvox Ahzod Table height: 690 mm Blade motor: 1.5 kW Electro-pump motor: 0.13 kW Hydraulic power unit motor: 0.22 kW Machine dimensions: 2460x2020x1790H mm Weight: 1220 kg Overhauled Ready for delivery

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Gujdpfsx Hw Sqox Ahzed Maximum non-feedable length 385 mm Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds