Used Deckel Milling Machine for sale (702)

Condition: used, Year of construction: 2005, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 82 Nm tool taper MAS BT 40 table surface area 630 x 500 mm max. table load 200 kg Swivel range -5 / +110 ° rotation range 360° ° T-slots 7x 14 x 63 mm number of toolpositions 16 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 17 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m 5 Axis CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - swivel-rotary-table : controlled B&C-Axis / only positioning Ffodpfot Uv Dfjx Agmet - Operating-Hours.: Power-On: ca. 37.700h / Spindle-Runtime: ca. 10.800h

Condition: good (used), Year of construction: 1980, Deckel FP1 Active milling machine with 3 axes, Heidenhain digital display, and angle table. SK 40 spindle mount. Good working condition, ready for demonstration under power upon request. Fjdpowg S I Tjfx Agmjft

Year of construction: 1994, condition: excellent (used), Cover milling machine FP 2A with control Dialog 12 + vice Ffedpfxofgmbdj Agmet

Condition: used, Year of construction: 1987, Deckel FP4-MA Contur 2 with handwheel (universal tool milling machine) year 1987 Ffjdpfx Agsxurkzomot

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z Fodpfx Asf E Ilzogmjft - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Fedpfx Ager U St Uomsft Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, Year of construction: 2004, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm Control 840D pl ShopMill Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 Nm tool taper HSK-A63 swivellable B: +/- 100 ° table surface area 4.200 x 900 mm max. table load 4.200 kg T-slots 9x 18H7 x 100 number of toolpositions 130 ( 120 +10 ) pos. tool taper HSK-A63 max. tool diameter 50 mm max. tool weight 6,0 kg max. tool length 200 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min feed speeds max. 20.000 mm/min Ffedpfjuntmqex Agmet total power requirement 92 kVA weight of the machine ca. 17,0 t dimensions of the machine ca. 11,0 x 5,5 x 3,0 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 360 linear - 5 Axis ( NC-Swivel-Milling-Head & LEHMANN - EA 430.2A ) - moveable tailstock - separated WorkingTable - internal Coolant-System - 120-pos. Tool-Magazine incl. cleaning-unit - 10 additional pos. for oversized tools - Machine equipped with increased accuracy

Condition: good (used), Year of construction: 1981, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Ffedpfx Agsuvgnqomet

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Paint Finish in Light Grey, CE Compliant!!! Technical Specifications: - Year of manufacture: 1987 Machine no.: 2203-2790 - Rigid angle table (freshly planed) - Spindle speed: 50–2500 rpm - Feed rate: 8–630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on column adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill extendable by 90 mm - Drawbar thread: M16 - Weight approx. 1500 kg Ffjdpfexctyajx Agmst Accessories & Features: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication system About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine has been partially overhauled, displays minimal backlash on the handwheels, and all lead screws move smoothly and evenly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are new. The rigid angle table has been freshly planed. This is a reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Condition: good (used), x-travel 300 mm y-travel 160 mm z-travel 360 mm Total power requirement 1 kW Machine weight approx. 0.8 t Fjdpfx Aew U Shhegmeft various engraving kits

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Transverse travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Fjdpjwffymofx Agmsft Spindle speeds 50 - 2,500 rpm

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Ffedpfx Agsxcilrsmjt

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. Fodpfx Agstumqvjmjft table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Year of construction: 1980, condition: good (used), Lid FP1 active milling machine with 3 axis HEIDENHAIN digital display, angle table. SK 40 spindle carrier. Good operational condition upon request under current demonstration ready. Ffsdpfx Aed Id N Regmet

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown Ffodpjucphxsfx Agmot

Year of construction: 1989, condition: used, machine/vehicle number: 2204-1736, table mounting size: 460 x 800 mm movement x: 485 mm movement y: 385 mm movement z: 380 mm tailstock stroke: von Hand ca. 70 mm spindle turning speed range: 50 - 3150 rpm carriages continuously adjustable: 2 - 1000 mm/min rapid move: 2 m/min electrical connection: 3,7/4,4 kW space needed: 2100 x 1650 x 1730 mm weight: 1850 kg Ffedoclli Uspfx Agmjt

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, feed length X-axis: 485 mm, feed length Y-axis: 385 mm, feed length Z-axis: 380 mm, spindle speed (max.): 3,150 rpm, Table size 795 x 460 mm Longitudinal travel 485 mm Transverse travel 385 mm Vertical travel 380 mm Spindle travel 80 mm Spindle speed 0 - 3,150 rpm Spindle taper horizontal ISO 40 Spindle taper vertical ISO 40 Control CONTOUR 2 Ffsdewffzkspfx Agmet

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment Fodpjwbi Rbofx Agmjft - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Year of construction: 1981, condition: good (used), Lid FP1 2-axis active milling machine with Heidenhain digital display, angular table. SK 40 spindle holder. Good working condition. Machine ready for demonstration under power by arrangement. Ffjdpfx Aohg Embsgmjt

Condition: good (used), machine/vehicle number: 16526, pattern table size: 320 x 440 mm working table size: 200 x 300 mm working area longitudinal: 250 mm working area cross: 220 mm spindle turning speed range: 1460 - 8550 rpm milling proportion: bei 1 : 1 ca. 105 x 165 mm spindle drive: 0,86 kW Ffedpodlkwgefx Agmot space needed: 1000 x 900 x 1320 mm weight: 360 kg

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Fodor D T U Djpfx Agmjft Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Year of construction: 1988, condition: good (used), Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Fsdpfork Aaaox Agmjft

Year of construction: 1983, condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm movement y: 450 mm movement z: 450 mm tailstock stroke: 80 mm spindle taper:SK 40 spindle turning speed range: 40 - 4000 rpm carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min space needed: 2000 x 2150 x 2030 mm Fedpfx Aofnry Hsgmjft weight: 2720 kg

Condition: used, Universal Tool Milling Machine with Active Digital Display DECKEL Type FP 1 Fsdpfx Agjr D T Uyemoft Universal Milling Machine Machine No. 2102 - 3322 Year of manufacture: 1986 Travel distance X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed (X and Y axes): 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - HEIDENHAIN active 3-axis digital readout, type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head: 60 mm - Vertical milling head swiveling and extendable 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant device integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on machine base - Operating manual, electrical diagrams, and spare parts list available Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Ffodpsxcbl Dsfx Agmot Weight: 3.8 kg Very good condition