Used Deckel Milling Machine for sale (690)

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. The machine can be viewed under power. Laodpowqdtpofx Ammoc The machine is bought as is. No warranty.

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Digital read-out Misc.accessories Ledpfxedr E Apj Ammjac MARCELS MASCHINEN CH

Condition: used, Year of construction: 1990, x-travel 0800 mm y-travel 550 mm z-travel 500 mm table-size 1000 x 630 mm feed range 0- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 20 - 4000 U/min main drive DC 10 kW CNC control Dialog 11 total power requirement 15 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area and Laedpfx Amoyq Slxsmec tool change with 30 pos. Machine has been refurbished by FPS in 2010.

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm z-travel 500 mm table-size 500 mm feed range 2- 10.000 mm/min rapid traverse 10 m/min Lasdeyq Sk Ujpfx Ammjc Tool bore ISO 40 turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished by FPS in 2010.

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Lsdpfx Asxfkm Aommoac Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Lajdswrdu Aspfx Ammoc Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: used, Brand Deckel Model FP4M Year of manufacture 1987 Spindle taper SK40 X-axis 500 mm Y-axis 400 mm Z-axis 400 mm Lajdow Hyb Ujpfx Ammec Table 800x460 mm Spindle speed 50-2500 rpm Power 4.4 kW

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, feed length X-axis: 485 mm, feed length Y-axis: 385 mm, feed length Z-axis: 380 mm, spindle speed (max.): 3,150 rpm, Table size 795 x 460 mm Longitudinal travel 485 mm Transverse travel 385 mm Vertical travel 380 mm Spindle travel 80 mm Ljdpfx Aowffzkjmmoac Spindle speed 0 - 3,150 rpm Spindle taper horizontal ISO 40 Spindle taper vertical ISO 40 Control CONTOUR 2

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW Laodpfx Amsy H Ifbemjc machine in stock.

Condition: good (used), Year of construction: 1996, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Travel distances: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 rpm Dimensions LxWxH: 2500 x 2200 x 2200 mm Lasdpfx Amjy Eyfwjmoc Weight: approx. 3,000 kg

Condition: used, functionality: unexamined, Copy Milling Machine DECKEL Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t Ledpfsy Hf Aqox Ammeac

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Equipment: documentation/manual, Dear Sir or Madam, We are offering a partially overhauled Deckel FP2 for sale. This newer model stands out particularly due to its stepless speed control, which makes operation very easy and extremely comfortable. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. --- Currently 3 units available for immediate delivery! --- Lajdoy Exayepfx Ammec Availability: 3x immediately Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Travel distances: X 400mm / Y 220mm / Z 400mm Drive power: 3kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar thread: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If required, we can directly install further equipment such as safety devices - We are happy to arrange shipping and/or installation for you

Condition: reconditioned (used), functionality: fully functional, Equipment: documentation/manual, Dear Sir or Madam, Lsdpjq H Eabofx Ammsac We hereby offer a Deckel FP3 milling machine. The machine is undergoing comprehensive partial refurbishment in our workshop and is therefore in excellent condition. We are happy to retrofit safety devices or additional equipment according to your requirements. We look forward to your inquiry! Delivery time: on request Dimensions: 2.00x1.60x1.90 m (LxWxH) Weight: approx. 1,500 kg Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 380 mm Table clamping surface: 800x420 mm Speed range: 40-2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10-500 mm/min Rapid traverse: approx. 1,500 mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified master craft business specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - We can perform a complete or partial overhaul of your selected machine upon request - You are free to choose the paint color for your selected machine - On request, you can order additional accessories such as tools, etc., directly - On request, we can also install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation at your location

Condition: excellent (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 320 mm, overall weight: 860 kg, Ruhla Type 58 Universal Toolroom Milling Machine Thiel Duplex 58 like Deckel FP1 Compact machine with drilling spindle and automatic feed in all 3 axes includes vice New digital display with 1 measuring rod included Swivel table +/- 0-30° Lodjwf Agdspfx Ammeac Table 715 x 260mm X 300mm Y 160mm Z 320mm Dimensions (LxDxH) approx. 110 x 110 x 170cm Inspection and testing are welcome

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout (Heidenhain) and Infinitely Variable Feed, Original Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine no. 2201-5527 >> Swivel-tilt-rotary table Lajdpfx Aoy Eqkzjmmsc >> Speed range: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be displaced 200 mm on spindle carrier >> Vertical and horizontal quill, SK40, extendable >> Pull stud system: M16 >> Weight: approx. 1,500 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central lubrication About the machine: Offered here is a universal milling machine Deckel FP3 in very good original condition. The machine shows minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable in all three axes, and each axis features rapid traverse. A significant advantage is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter dimensions and the machine will automatically move to defined positions. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site. The machine is available immediately.

Condition: good (used), Year of construction: 1987, Travel X/Y/Z 400/250/375 mm, 18 speed 80 - 4000 U/min, motor 2,2 KW, spindle SK 40, control MAHO CNC 232, table size 700x270 mm, hydraulic tool clamping, coolant device, spash guard, 20 tool holders with tools, tool setter, machine vice GOODJ 125 N, clamping set, machine feet, several tools, manual Lodpfxjlu Hpgo Ammsac

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes Lsdpsy D Tl Iofx Ammsac >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, Deckel FP1 FPS retrofitted tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a training department. Adjustable tilting table, SK 40 spindle taper. Accessories include various collets and arbor holders. In good, ready-to-use condition. Test run under power can be arranged by appointment. Ledpsy Dz T Tjfx Ammjac

Condition: used, Year of construction: 1999, x-travel 500 mm y-travel 400 mm z-travel 400 mm Lajdpfx Amoy Aa Nkomec control Heidenhain weight of the machine ca. 3200 kg

Condition: used, Deckel milling machine FP1 with 3-axis digital readout, 380V, 120–1900 rpm. Travel distance X-axis: 300 mm, Y-axis: 150 mm, Z-axis: 340 mm. Tool holder: MK 4 with draw thread S 20 x 2. Milling head type: Vertical milling head. Table type: Fixed table. Table clamping area: 600 x 210 mm. T-slot size: 12 mm. Feed X-axis: 290 mm, Y-axis: 150 mm, Z-axis: 330 mm. Weight: 700 kg. Deckel FP1 milling machine. Ljdpoy Ddd Ujfx Ammoac

Year of construction: 1994, condition: excellent (used), Deckel milling machine FP 2A with Dialog 12 control system + vise. Lodpfjfgmbdox Ammsac

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display Lajdpfx Amspmrpxsmoc 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Laodpfxsihp U Do Ammsc Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. Lasdpfx Amjv Td Elemoc • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1984, functionality: fully functional, Technical Data: Working Area X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working Spindle with rotary table Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 rpm, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Fixed table: 700 x 350 mm, 5 T-slots Fixed table: max. load 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Laodpfx Asyzy Azsmmsc Equipment: - CNC control - Fixed table - Milling head swivels +/- 90° - Hydraulic clamping device - Coolant system - Emergency stop push button