Used Dmg Machining Center for sale (403)

Condition: excellent (used), Year of construction: 2011, FOR SALE 5-AXIS Machining Centre Model: DMG SAUER ULTRASONIC 20 LINEAR Year: 2011 Configuration: Complete machine with robot To complete the technical file, could you please specify the following characteristics: - Table capacity / Axis travel (X × Y × Z): [e.g., 800 × 500 × 500 mm] - Payload / Max. table load: [e.g., 1,200 kg] - Accepted raw workpiece dimensions: [e.g., Ø 500 mm / 700 × 500 mm] - Spindle power / Torque: [e.g., 18 kW, 200 Nm] - Robot capacity (Payload / Reach): [e.g., 10 kg, reach 1,200 mm] - Ultrasonic machining capability: [Amplitude, frequency, compatible tools] Bsdpfxeyi Tpie Aa Held SIEMENS CNC Awaiting your response, I remain at your disposal for any further information.

Condition: good (used), Year of construction: 2004, operating hours: 6,700 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: 530 TNC, table width: 600 mm, table length: 1,200 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 26, Vertical Machining Center Deckel Maho DMC 103V Year of manufacture: 2004 Control: Heidenhain 530 TNC Operating hours: approx. 6,700 h Technical data: Spindle speed: 1 - 10,000 rpm Drive power: 13 kW Tool holder: SK 40 Bsdpfoyl R Uzsx Aa Hold Travel paths: X-axis: 1,000 mm Y-axis: 600 mm Y-axis: 600 mm Direct measuring system in all axes Accessories: Coolant system Preparation for 3D probe

Condition: used, Year of construction: 2007, x-travel 500 mm y-travel 420 mm z-travel 380 mm Control Heidenhain TNC 530 max. turning speeds 20-18000 min/-1 tool taper SK 30 table surface area 800 x 480 mm max. table load 500 kg number of tool places 32 Pos. max. tool length 280 mm max. tool weight 6 kg rapid traverse 50 m/min feed speeds 20 m/min weight of the machine ca. 5700 kg Bjdpfjyk H Nrox Aa Hold dimensions of the machine ca. 6,6 x 5,4 x 3 m total power requirement 45 kW Number of working hours 24.437 h spindle hours 9.874 h Number of axles 5 St. 5-axis Milling Center Deckel Maho DMG 50 eVo linear, built 2007 Attachment: 10 off SK30 tool holder Note: The control system occasionally switches to EMERGENCY STOP due to a hydraulic fault. This is probably due to the control system and not the hydraulic unit or hoses, as there are no leaks. The supplier expects that a minor repair will suffice.

Year of construction: 1995, condition: excellent (used), Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 rpm Tool holder SK 40 Manual swivel rotary table tool holder vice Blsdpfslawavex Aa Hjd Accesories

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840 D, table width: 500 mm, table length: 500 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 18,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 180, Horizontal machining center DECKEL MAHO DMC 60 H Linear with 2-pallet changer and 180 tool magazine positions Year of manufacture: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0–18,000 rpm Drive power: 35 kW Torque: Spindle taper: HSK 63 Number of magazine positions: 180 pcs Number of pallets: 2 Pallet size: 500x500 mm Travel paths: X-axis: 630 mm Y-axis: 800 mm Bedpfsylm A Iox Aa Hsld Z-axis: 650 mm C-axis: 0.001° All axes equipped with linear drives Accessories: - Coolant system - Chip conveyor Machine has been regularly serviced Video available upon request.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Sinumerik, controller model: Celos - 840D, table width: 400 mm, table length: 400 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 20,000 rpm, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Horizontal machining center DMG MORI NHX-4000 with 2-fold pallet changer Year of manufacture: 2017 Control: Celos with Sinumerik 840Dsl Operate Program run time: 21,000 hours Technical data: Spindle speed: 10 - 20,000 rpm (speedMASTER® motor spindle) Drive power: 35/25 kW Torque: 130/85 Nm Tool interface: HSK 63 Number of magazine pockets: 60 - ring magazine Travel paths: Bsdpfx Asylmzdoa Hsld X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm C-axis: 0.001° Pallet size: 400x400 mm Accessories: 2-fold pallet changer Coolant system for high-pressure internal coolant (IKZ) 70 bar - 900 liter tank - paper band filter Chip conveyor Preparation for Renishaw 3D probe

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. spindle speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales Bodpexvzy Uefx Aa Held PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Condition: good (used), functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, total height: 2,500 mm, total length: 5,000 mm, total width: 3,500 mm, table width: 500 mm, table length: 630 mm, DMG DMC 80 H Hi-Dyn RS4 For sale is a horizontal machining center DMC 80 H hi-dyn RS4. The machine is in good condition. Technical Specifications Travel distances: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm Table data: Table size: approx. 630 × 500 mm Max. workpiece weight: ~1,200–1,400 kg Bsdpfxsx Uq Sas Aa Hsld Rotary table: 4th axis, 360° continuous Spindle: Direct drive, liquid-cooled Speed ranges: Automatic mode: 0–6,000 rpm Setup mode: 0–800 rpm Manual mode: 0–5,000 rpm Max. speed: up to 8,000 rpm Spindle power: approx. 20 kW Torque: S1 – 100% duty cycle On request, dismantling, loading, and transport within Europe can be organized for an additional charge. Prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell? For further information or contact options, visit our website.

Condition: like new (used), Year of construction: 2009, operating hours: 625 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, total height: 2,100 mm, total length: 2,000 mm, total width: 1,700 mm, overall weight: 1,600 kg, For sale is a 3+2 axis machining center from DMG, model DMU 35 M. This machine comes from a technical training institute and was used mainly for training purposes, including CNC control and setup. Special attention should be paid to its very low spindle hours. Technical data: Year of manufacture: 2009 Spindle hours: 625 Machine no.: 18065358844 X axis: 350 mm Y axis: 240 mm Z axis: 340 mm Max. spindle speed: 6,300 rpm Feed rate: infinitely variable up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors in X, Y & Z axis Clamping surface: Ø 400 x 280 mm Swivel range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool changer: manual change Tool holder: SK 40 Tool clamp: pneumatic/mechanical Space requirements: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Upon request, transport and loading can be organized Europe-wide at additional cost. All prices are plus VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Bodpox Aiiqjfx Aa Held Machinery purchase and sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Bledpfx Aajwbhq Hj Hjd Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: 810D, table width: 600 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 7,600 h, Equipment: chip conveyor, rotational speed infinitely variable, Very nice DMC 1035 V ECO with Siemens control system Year of manufacture: 2012 Program run hours: 7,600 h SK 40 with 10,000 rpm spindle 30-position tool changer Blodjx Dci Topfx Aa Hjd Production package with measuring probe and tool length measuring device in the work area Internal cooling Chip conveyor Available immediately.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Travels X = 1,450 mm, Y = 700 mm, Z = 550 mm Rapid traverse 42 m/min Spindle speed range 20 to 14,000 rpm Inline spindle with power 20.3 kW / 14.5 kW (40/100% load) Tool taper SK40 DIN69871 Tool shank according to DIN69872 Bljdpsylpf Ssfx Aa Hed Tool changer with 20-position SK40 magazine (disc with tool holder in bushing and double gripper) Table clamping area 1,760 x 750 mm Direct position measuring in X, Y, Z axes Machine is connected, can be tested.

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Bjdpfxjxpg H Hs Aa Hsld Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Blsdpfxexwxc As Aa Hsd Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Condition: good (used), Year of construction: 2012, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, Used 3-axis machining centre Bledox N Dcuepfx Aa Hed DMG MORI Milltap 700 Year of manufacture: 2012 Control: Siemens Travel paths: X 700 mm, Y 420 mm, Z 380 mm Spindle speed: 10,000 rpm Tool holder: DIN30 Renishaw 15-position tool changer Dimensions and Weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg The machine can be inspected by appointment in Burbach. Loading can be arranged. Technical data, accessories, and machine description are non-binding.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Blsdpsyiyg Iefx Aa Hed Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2002, Universal Machining Center Machine type: DMG DMU 200 P Bjdpfx Aasxuqn Se Held Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: used, Year of construction: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Bljdpfxsw Ew T Se Aa Hjd Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: ready for operation (used), Year of construction: 2006, CNC machining center DMC 635V Year of manufacture 2006 Heidenhain TNC 530i control Control approx. 58,400 hours Program run approx. 19,980 hours According to the sticker in the control cabinet, the spindle and motor were replaced in January 2019 at 10,660 hours. No documentation available. Machine runs smoothly Travel distances X 635 Bjdew Tir Ujpfx Aa Held Y 510 Z 460 Tool holder SK 40 20-position tool changer Table 790×560 with chip conveyor Weight approx. 3700 kg This offer is directed exclusively at commercial enterprises within the meaning of §14 BGB (German Civil Code). No sale to private individuals.

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 4,000 kg, number of slots in tool magazine: 120, controller manufacturer: Heidenhain, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, overall weight: 12,000 kg, table length: 630 mm, table width: 500 mm, controller model: iTNC530, nominal power (apparent): 61 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, table load: 4,000 kg, operating hours of spindle: 19,500 h, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. Blodpfjrxrklsx Aa Hed The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Bedpfsw Ht Ibex Aa Held Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours: 69,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 40, controller manufacturer: Siemens, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, overall weight: 10,000 kg, table length: 800 mm, table width: 630 mm, controller model: Sinumerik 840D powerline, coolant supply: 40 bar, nominal power (apparent): 69 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle nose: HSK63, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, table load: 800 kg, operating hours of spindle: 27,000 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80U Year of manufacture: 2002 Operating hours: 69,000h Spindle hours: 27,000h Equipment: 5-axis Swivel head Direct path measurement in X/Y/Z (glass scales) Chip conveyor Bsdpfxev Eurms Aa Hsld Extraction NC rotary table as an add-on table Pallet changer Tool magazine 60 places Heidenhain measuring probe Handwheel Rotating viewing window IKZ 40 bar Chip flushing Operating mode 4 + Machine technically serviced and in very good condition + Geometrically within new machine tolerance + Transport and commissioning can be offered separately

Condition: ready for operation (used), Year of construction: 2012, Axes: 5, travel X/Y/Z: 400mm/400mm/375mm, spindle speed: 18000rpm, power: 35kW, tool holder: HSK-A63, tool positions: 60, rapid traverse: 30m/min, table dimensions X/Y: 480mm/480mm, max. workpiece weight: 250kg, machine weight: approx. 8150kg, operating hours: approx. 50950h, spindle hours: approx. 20200h. The lifting and swivel unit of the pallet changer are defective. Documentation available. An on-site inspection is possible. Bjdpfxowwvw Hj Aa Held

Year of construction: 2008, condition: ready for operation (used), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain MillPlus IT, operating hours: 42603h, spindle hours: 20137h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible. Bledpfov Exrksx Aa Hjd

Condition: ready for operation (used), Year of construction: 2009, Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible. Bodpfxjxrui Ij Aa Hold