Used Hermle Milling Machine for sale (152)

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Machine parameters: Travels in X, Y, Z axes: 650X450X450 mm Description: The machine is in good technical condition; test runs are possible by prior arrangement. HSK 63. Heidenhain 426/430. - The current condition corresponds to the machine's age, and there are currently no issues. X-axis ball screw was replaced on 5.1.2022. Hydraulics were overhauled on 25.4.2024. - Spindle hours: 41,273, machine hours: 89,892 - Number of axes: 5. Video of the machine available on request. Giedjxyipfepfx Aa Isl

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 430, rotational speed (max.): 16,000 rpm, spindle speed (max.): 16,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, Equipment: documentation/manual, For sale is a well-maintained Hermle C800V CNC 3-axis machining center, year of manufacture 2001, equipped with Heidenhain TNC 430 control. The machine has been serviced regularly and is in excellent condition. Technical data / Features: • Travel paths: X 800 mm, Y 600 mm, Z 500 mm • Spindle: up to 16,000 rpm, with SK 40 clamping system • Tool changer: 30-position magazine • Additional accessories included: o Heidenhain 3D probe (TS 642) o Chip conveyor o Coolant spray gun o Original machine documentation • Essential spare parts have been regularly replaced (e.g., tool changer flap, electrical cabinet cooler, magazine clamps, LED workspace lighting, windows). Gisdpex Rw Igsfx Aa Isl • Additional options (at extra cost): machine vice and up to 80 nearly new SK 40 tool holders. Condition: Used, but very well maintained and fully functional. Optional accessories: Machine vice and up to 80 new SK 40 tool holders available at extra charge. The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 85, 5-Axis CNC Vertical Machining Centre with 6-station Pallet Pool Hermle C42U New in 2013/2014 Heidenhain iTNC 530 CNC control IHS Pallet system for 6 pallets (6 x workpiece fixtures) Pallet size 400 x 400 mm 2-Axis NC Rotary Tilting Table Rotating axis C-Axis 360° - 0.001° Tilting axis A-Axis +/- 130° - 0.001° Working travels: X 800 mm Y 800 mm Z 550 mm 85 station ATC Spindle speeds to 18000 rpm New spindle replacement in 2019 and max. 300 hours run after replacement FULLY CHECKED by a Hermle service engineer in 06.2024 (test report available) Machine in EXCELLENT condition. Gedpfx Aoxg Nfgea Ieil Video live call possible NOTE: The machine is fitted with an automation system to change pallets of 400 mm. These pallets are not included. The previous owner used a “cone fixture” system, fitting their parts with the cone fixtures for automatic loading and unloading. The “cone fixtures” are included.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours of spindle: 1,200 h, 1 unit CNC machining center C 12 U with 5-axis simultaneous Heidenhain iTNC 640 control Manufacturer: Hermle Year of manufacture: 2015 Technical specifications Working area: - Travel paths X-axis: 350 mm Y-axis: 440 mm Z-axis: 330 mm - Swivel range A-axis: +115° / -115° - Swivel range C-axis: 360° - Direct linear measuring system, resolution: 0.0001 mm - NC rotary/swivel table: 320 mm diameter - Table load capacity: 100 kg - A-axis rotation speed: 25 rpm - C-axis rotation speed: 40 rpm Main spindle drive: - Drive power (100% - 40% duty cycle): 17 - 25 kW - Torque (100% - 40% duty cycle): 54 - 80 Nm - Spindle speed: 20 - 18,000 rpm - Spindle taper: HSK-63 Rapid traverse In X, Y, and Z-axes: 30 m/min Linear acceleration: 4 m/s² Tool changer: - Magazine capacity: 36 tools - Max. tool diameter: 80 mm - Chip-to-chip time as per VDI 2852: 4.5 sec Space requirements: 4.00 x 4.00 x 3.10 m Machine weight approx.: 7.5 t Equipment Gijdpfxox N Dt Hs Aa Isl Clamping plate, approx. 65 HSK 63 tool holders, 2 machine vices, 1 three-jaw chuck, electronic handwheel, Heidenhain probe, Blum calibration pin, chip flushing gun, emulsion mist extraction, Blum tool breakage/tool measurement A1, tool setting device, kinematics suitcase, chip conveyor without IKZ (internal coolant supply) Delivery terms: ex stock, Bad Emstal Availability: available from January 2026, by arrangement; machine can be demonstrated under power Technical data subject to change without notice.

Condition: excellent (used), Year of construction: 2004, PLC software: 07.08.2020 iC30V2_1.10 SP1 NC software: 07.08.2020 340 422 14 SP5 Machine specification: - Heidenhain iTNC530 03/04 - Main spindle 18,000 1/min 03/04 - HSK-A63 03/04 - 32 tool positions 03/04 - Linear axes standard versi03/04 - NC swivel rotary table ø 630m03/04 - specified - T-slots - Internal coolant supply 40 - Paper belt filter - Scraper belt conveyor - Basic cabin design - Manual cabin door - Manual cab roof - Polycarb. safety shield Gisdorwpdnopfx Aa Isl - 50 Hz - BLUM tool breakage/ measurement - Renishaw measuring probe Other accessories - Electrical heat compensator - Manual control module - Blow-off device - Oil mist extraction - Flange for suction unit - Chip flushing gun - Sealing air for scales - Chip cart 200 liters - Automatic cabin door - Pneumatic extension clamping / release - Automation interface Programs - 6-fold rotary feed-through / SRT630 - Commissioning included - Transportation free kerbside on request, but excluding unloading and installation of the machine.

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Hermle C 22 U with RS05 Automation Year of manufacture: 2022 Control: Heidenhain TNC 640 X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Table size: ⌀ 800 mm Spindle: HSK-A 63 Spindle speed: 18,000 rpm Tool changer: 55+ ZM216 loaded, 271 tool positions Operating hours: approx. 11,000 h Spindle hours: approx. 7,500 h Giodpfxop Eci Tj Aa Iel

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 460, rotational speed (max.): 15,000 rpm, spindle nose: HSK 63A, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used HERMLE C800U high-speed 5-axis continuous vertical machining center; this is a medium-sized CNC machine equipped with a gantry granite structure, weighing 8,200 kg. Axis travels: X 800 mm, Y 500 mm, Z 600 mm, with a 5-axis table featuring a 280 mm diameter platter. Gedpjxryfzjfx Aa Isil Year of manufacture: 2000, fitted with HEIDENHAIN TNC 430, HSK 63A spindle at 15,000 rpm (max 19 kW) cooled by a dedicated chiller, 30-position pick-up type tool changer, and remote electronic handwheel. The equipment is completed by a KNOLL chip conveyor, high-pressure through-spindle coolant, and a RENISHAW MP10 wireless 3D workpiece probe.

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: HEIDENHAIN TNC430 X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 450 A-axis travel mm: +/- 110 C-axis degrees: +/- 360 Number of pallets: 1 Table dimensions mm: - Max. table load kg: - Feed rate mm/min X, Y, Z: 20,000 Max. rapid traverse m/min X, Y, Z: 35,000 Spindle speed rpm: 50 - 10,000 Spindle power kW: - Taper type: ISO-SK40 Torque Nm: - Tool changer type: Chain Tool changer positions: 30 Max. tool diameter mm: - Max. tool diameter with adjacent pockets empty: - Max. tool length mm: - Max. tool weight kg: - Coolant tank capacity l.: - Through-spindle coolant bar.: - Giedpjxak A Hefx Aa Isl EQUIPMENT: Zero-point clamping system: EROWA MTS / EROWA MTS RENISHAW OMP60 probe MACHINE DIMENSIONS Length mm: 2,130 Width mm: 2,300 Height mm: 2,750 Weight kg: 6,500

Condition: good (used), Year of construction: 1999, HERMLE C600 U 5 AXIS MACHINING CENTRE WITH HEIDENHAIN ITNC430 CONTROL UKUK Table Dimension Ø280mm (4 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=600mm, 'Y'=450mm, 'Z'=450mm, 'B'=220° (±110° ), 'C'=360° . Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. 30 Position ATC. S/No. 12859 (1999). Giodpfox A Hgtex Aa Ijl

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! Gisdpfx Aaoxqfzre Ijl TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: ready for operation (used), Year of construction: 1996, Control Unit Brand HEIDENHAIN Main Drive Gsdpfxox D Izze Aa Ijil Spindle speed range 15000 Tool taper SK40 Number of axis 3 This 3-axis Hermle C800V was manufactured in 1996. It features a SK40 spindle, capable of reaching up to 15,000 RPM, and includes tool length measuring. Ideal for precise vertical machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 18780, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotary table diameter: 800 mm, spindle speed (min.): 18,000 rpm, Technical Details: Used Universal Machining Centre HERMLE C 40U DYNAMIC Control: HEIDENHAIN iTNC 530 X-travel: 850 mm Y-travel: 700 mm Z-travel: 500 mm NC rotary swivel table: Ø800 mm Godpjx Ecmhofx Aa Ijil 6-way rotary feedthrough Spindle speed: 18,000 rpm Air blast through spindle center Tool holder: HSK-A 63 Tool magazine: 38 positions Internal coolant supply: 80 bar Handwheel HR-410 Total power consumption: 41 kVA Machine weight: approx. 10.5 t Equipment/Features - Paper band filter - Coolant system - Chip conveyor - Sealed air for scales - Heidenhain infrared probe - Blum A2 laser tool measurement system - 3D Quick Set - Electronic handwheel

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Godpfsxpil Ssx Aa Ioil Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: reconditioned (used), Year of construction: 2009, CNC Vertical Machining Center HERMLE C 1200 V Equipped with Heidenhain iTNC 530 CNC control Year of manufacture: 2009 Travel ranges: X 1200 mm, Y 900 mm, Z 500 mm Speed range: 20 – 10,000 rpm, stepless (HSK 63) Includes the following accessories: - Fixed angular table, clamping surface 1260 mm x 800 mm - Vertical tool changer with 30 magazine slots (HSK 63) - Internal coolant supply, 40 bar - Air blow-off device - Scraper belt conveyor Gedpsx Hhctefx Aa Ioil - Rotating clear-view window - Coolant system - Electronic thermal compensation, iTNC 530 - Electronic hand control module HR 410 - 3D measuring probe, Heidenhain - Switch cabinet cooling unit (RITTAL) - Oil mist extraction - Various HSK 63 tool holders, equipped with tools - Spindle oil cooler - Chip flushing gun - 4 height-adjustable machine feet - Operating manuals

Condition: good (used), Year of construction: 2002, HERMLE C800 U 5 AXIS MACHINING CENTRE WITH HEIDENHAIN ITNC 530 CONTROL Table Dimension Ø280mm (4 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=800mm, 'Y'=600mm, 'Z'=500mm, 'B'=220° (±110° ), 'C'=360° . Rapid Traverse 30m/min. Spindle Taper ISO 40. Maximum Spindle Speed 12,000rpm. 87 Position ATC. S/No. 15650 (2002). Giodpfx Aaex A Hf As Ijl

Condition: used, Year of construction: 2000, operating hours: 13,024 h, functionality: fully functional, machine/vehicle number: 14248, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heindenhain, spindle speed (max.): 16,000 rpm, operating hours of spindle: 12,420 h, coolant supply: 40 bar, spindle nose: HSK63, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Hermle C800V Used tool milling machine, year of manufacture 2000 HSK 63 (30 positions) Heidenhain TNC430 Internal cooling (rotary union needs to be replaced) The machine can be inspected under power by appointment. Gedpfx Aajx Exxie Ioil The machine is available for immediate delivery.

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Additional Equipment Tool Magazine: Additional magazine ZM157 Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Gisdpfex D Ew Hox Aa Iel Application Types Milling

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: TNC430, rotary table diameter: 540 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 32,000 h, spindle nose: HSK63, number of slots in tool magazine: 30, Equipment: rotational speed infinitely variable, Very well-maintained HERMLE C800-U. Swiveling rotary table: 540 x 540mm Program runtime only approx. 34,000 hours. Field of application: Toolmaking Service carried out by the manufacturer. Last spindle head replacement: 04/2017 New A-axis drive Heidenhain iR probe Gjdex Hg E Topfx Aa Ieil

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm Gedpjx Dndcofx Aa Ioil z-travel 500 mm

Condition: reconditioned (used), Year of construction: 2008, CNC Vertical Machining Center HERMLE C 30 U Equipped with Heidenhain iTNC 530 contouring control Year of manufacture: 2008 Travels: X 650 Y 600 Z 500 mm Speed range: 20 – 18,000 rpm, stepless (HSK 63) Gjdpfxex Hg Ubj Aa Isil Including the following accessories: - NC rotary tilting table Ø 630 mm - Vertical tool changer with 32 magazine stations (HSK 63) - Standard version linear axes - Spindle center air blast - Blowing device - Through-spindle coolant 40 bar, paper band filter for coolant system - Scraper belt conveyor - Manual cabin door, manual cabin roof - Polycarbonate safety windows - Electronic thermal compensation iTNC 530 - Electronic hand control module iTNC - 3D measuring probe Heidenhain - Various HSK 63 tool holders with mounted tools - Rotating clear-view window - Oil mist extraction unit - Chip rinsing gun - 4 height-adjustable machine feet - Operating manuals

Condition: excellent (used), Year of construction: 1998, operating hours: 148,086 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, rotational speed (max.): 12,000 rpm, overall weight: 6,500 kg, coolant supply: 20 bar, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain TNC 430 (handles modern trochoidal paths without issues) Year of manufacture: 1998 Basic dimensions (L/W/H): 2.5 x 2.1 x 2.7 m X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Highlights: Tool measurement / workpiece probe / LED machine lighting / HSK63 / V2A stainless steel interior cladding / ICS (internal coolant supply) / chip conveyor / external air with cold air nozzle via M-function / status LED signal lamp Spindle Data Spindle mount: HSK A 63 (12,000 rpm) Tool magazine: 30 positions Feeds and Speeds Feed rate range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min Giedpfjxz A Nnjx Aa Ijl MACHINE DETAILS Machine weight: approx. 6,500 kg Control on-time: 154,435 h Machine on-time: 148,086 h Program runtime: 49,428 h Spindle hours: 46,014 h Drive hours: 77,927 h 5-axis postprocessor for Fusion 360 included Inspection and demonstration by appointment. Price is net, plus VAT.

Condition: ready for operation (used), Year of construction: 1994, General Data Machine weight 4500 kg Main Drive Spindle speed range 6300 rpm Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 500 mm Gjdpfx Asx D E Uxja Ijil Z-Axis Movement 500 mm Table Table load 500 kg This 3-axis HERMLE UWF 802M was manufactured in 1994. It features a robust table size of 800 x 500 mm, capable of handling a maximum load of 500 kg. Equipped with a Heidenhain TNC control unit, it offers precise control with spindle speeds up to 6,300 rpm and rapid traverse rates up to 5,000 mm/min. Ideal for demanding machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: reconditioned (used), Year of construction: 2008, CNC Vertical Machining Center HERMLE C 50 U With Heidenhain iTNC 530 path control system Year of manufacture: 2008 Travel paths: X 1000 / Y 1100 / Z 750 mm Speed range: 20 – 18,000 rpm, stepless (HSK 63) Including the following accessories: • NC rotary/swivel table Ø 1150 mm x 900 mm • Vertical tool changer with 60 magazine places (HSK 63) • Blowing air through spindle center • Air blow-off unit • High-pressure coolant system, 80 bar, with paper band filter • Scraper belt conveyor • Coolant system • Sealing air for scales, bed flushing • Oil mist extraction unit • Manual cabin door, automatic cabin roof Giodex Hg Twjpfx Aa Isl • Electronic thermal compensation iTNC 530 • Electronic hand control module HR 410 • 3D touch probe by Heidenhain • Various HSK 63 tool holders loaded with tools • Rotating clear view window • Chip rinsing gun • 4 height-adjustable machine feet • Operating manuals

Condition: ready for operation (used), Year of construction: 2001, Table Table load 1000 kg Main Drive Number of axis 3 Spindle Speed 16000 RPM Spindle motor power 15 kW Tool taper SK 40 Movement X-Axis Movement 600 mm Z-Axis Movement 450 mm Y-Axis Movement 450 mm Tools Giodpfxox D Iawe Aa Ijl Max weight 6 kg This 3-axis HERMLE C600V vertical machining center was manufactured in 2001. It features a Heidenhain iTNC 530 CNC path control, 7,000 spindle hours, and a modified gantry design. The machine offers a rapid traverse of 35 m/min, a spindle speed up to 16,000 rpm, and a tool magazine with 30 positions. If you are looking to get high-quality milling capabilities, consider the HERMLE C600V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TC 530, spindle motor power: 15,000 W, swivel angle C-axis (max.): 360 °, number of axes: 5, Control Unit Brand HEIDENHAIN Model TC 530 Main Drive Spindle motor power 15 kw Spindle bore 18000 Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm C-Axis Movement 360º table rotation Media Chip conveyor Yes This HERMLE C30U Vertical Machine Center was made in the year 2006. It is equipped with a HEIDENHAIN TC 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 identical units available. Giodpfox D I Saox Aa Iol Application Types Milling