Used Trumpf Press Brake for sale (384)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2009, operating hours: 14,367 h, stroke length: 445 mm, throat depth: 420 mm, overall weight: 25,000 kg, total width: 5,300 mm, total height: 3,200 mm, pressing force: 320 t, clearance between the columns: 3,680 mm, table length: 4,420 mm, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning Nwjdpfezdc A Iex Ai Tsn + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices

Condition: good (used), functionality: fully functional, Year of construction: 2011, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning BendMaster: Nwjdpfozwla Uex Ai Ten - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection - Remote service via the Internet

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch Nwjdpfxsz Rl Nhe Ai Ten - Communication bus Safety - Standard safety devices

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, controller manufacturer: Delem, bending force (max.): 50 t, working width: 1,280 mm, stroke length: 215 mm, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.2metre Press Brake For Sale Brand: Trumpf Type/Model: Trumabend V50 Nsdpfx Aox Nip Hei Tjwn Year:2000 Trumabend V 50 Technical details Capacity: 50ton x 1.2metre: Full bed length: 1280 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: excellent (used), Year of construction: 2006, Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Response time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Weight of the press: 7,300 kg Voltage: 3 x 400 V Rated current: 24.0 A Nwsdpfx Aijz Hl Nfs Tjn Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V= Compressed air connection: 6 bar

Condition: ready for operation (used), Year of construction: 1996, stroke length: 365 mm, overall weight: 9,050 kg, pressing force: 85 t, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Year of manufacture: 1996 Technical data Manufacturer: Trumpf Type: TrumaBend V85 Year of manufacture: 1996 Press force: 85 t Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Nodpfx Aieza Hxro Tjwn Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, working width: 3,100 mm, stroke length: 350 mm, pressing force: 100 t, working range: 3,100 mm, Used good condition Trumpf Trubend 3100 Series 3000 3metre CNC pressbrake for sale Used Trumpf Trubend 3100 B26 with extended stroke and daylight for sale 3metre x 100ton 6 axis pressbrake for sale Brand/make: TRUMPF Model: TRUBEND 3100 b26 Nodpov Hru Uofx Ai Tjwn Type: CNC hydraulic Press Brakes New 2016 Location: United kingdom Specification: Tonnage: 100ton Type: hydraulic downstroke H frame pressbrake Overall Length 3.1 m /3metre 6axis in total with a 4 axis back gauge Touch screen control Tonnage 1000Kn Stroke 350mm Brake time 46ms

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, stroke length: 215 mm, overall weight: 7,300 kg, pressing force: 86 t, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Nwodoz Hvgzopfx Ai Tsn MACHINE DETAILS Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Compressed air connection: 6 bar Weight of the press: 7,300 kg

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Nedoxdt Umspfx Ai Town Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Used very clean, well maintained Trumpf V 85S series hydraulic down stroke cnc pressbrake with a large amount of tooling for sale Trumpf v85s 2.5 metre x 85ton – 4axis cnc pressbrake in good condition Njdpfx Aior Hcl Aj Tewn Make: Trumpf Model: Trumabend v85s Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 86ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Large amount of upper and lower Trumpf tooling, some tooling is brand new Complete with: • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: used, functionality: unexamined, Year of construction: 2016, machine/vehicle number: 24398, control type: CNC control, controller manufacturer: Cybelec, controller model: Modeva Pac 15, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Nodpjx Dh U Iefx Ai Town

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Capacity: 2050 x 85 tons Control: Delem DA69 Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005 Nsdsy Dpufspfx Ai Tewn

Condition: used, Year of construction: 1991, Offered for sale: Hydraulic CNC press brake with 5-axis backgauge. Bending length: 3060mm. Pressing force: 1300kN, max. stroke: 215mm, max. operating pressure: 340bar, usable installation height: 385mm. Inspection possible by arrangement. Njdpoz Rn D Iefx Ai Tewn

Condition: good (used), Year of construction: 2011, overall weight: 19,700 kg, total length: 5,100 mm, total width: 2,200 mm, total height: 3,400 mm, Press force: 230 t Bending length: 4050 mm Distance between uprights: 3550 mm Upright overhang: 420 mm Oil capacity: 400 l Control system: ModEva 10S Machine weight (approx.): 19700 kg Dimensions: 5100 x 2160 x 3420 mm Equipment/Accessories: - Automatic tool clamping, pneumatic - Motorized crowning Njdpfoztafqjx Ai Tjwn - Akas-Fiessler safety laser - Bending aid 1 + 2 (right and left) - Die shifting m1 and m2 - Axis-controlled: Y1, Y2, Xs, Xm, X delta, R, Z1, Z2

Year of construction: 2011, condition: excellent (used), Used Trumpf Trubend Series 3120 CNC pressbrake for sale VIDEO at the bottom of the listing Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3120 Type: Downstroke CNC hydraulic Press Brake for sale New / year: 2011 Location: United kingdom Specification Tonnage 119.749 t / 120ton Type: hydraulic downstroke Overall Length 3.1 m /3metre BH 2.7 m Stroke 199.9 mm Nwjdpfx Aishzb S Hs Tsn Number of axis: 6axis – 4 axis back gauge With crowning

Condition: good (used), functionality: fully functional, Year of construction: 2000, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power! Nwedpfx Ajx S H Uxoi Tjn

Condition: ready for operation (used), Year of construction: 2000, number of axes: 6, pressing force: 133 t, This 6-axis TRUMPF TrumaBend V130 was manufactured in 2000. It features a bending length of 3,000 mm and a pressing force of 130 t. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V130 press brake we have for sale. Contact us for further details. Nwodpfx Ais Aay A Tj Tsn Technical Specification Bending Length 3000 mm

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: Njdpfou T Nknox Ai Tewn - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: good (used), functionality: fully functional, Year of construction: 2005, Press force: 400 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: CYBELEC ModEva 10 S Total power requirement: 47 kW Machine weight: approx. 30,400 kg Space requirement: approx. 6000x3000x3450 mm Nwjdpfx Aoy Ew E Ioi Ton Accessories/Equipment: - 2 bending aids in front of the machine - 2 controlled stop fingers - 1 manually adjustable stop finger - Light curtain in front of the machine - Control system: CYBELEC ModEva 10 S - Parking space on the right for the bending aid - Die shifting - Tool holder on the top and bottom, EHT pneumatic - Crowning - Pneumatic tool shifting - Foot switch - Side protective doors - Controlled axes: Y1 - Y2 - R - Z1 - Z2 - inclination

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, stroke length: 445 mm, overall weight: 8,600 kg, pressing force: 85 t, operating pressure: 300 bar, control voltage: 24 V, TECHNICAL DETAILS Control system: TASC 6000 Pressing force: 850 kN Stroke: 445 mm Operating pressure: 300 bar Follow-up time: 95 ms Follow-up travel at 220 mm/s: 10 mm Follow-up travel at 160 mm/s: 8.5 mm Equipment: 4-axis rear stop, bending aid MACHINE DETAILS Safety clearance: 190 mm Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V Nodpfxjzlc Rye Ai Tswn Compressed air connection: 6 bar Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,500 x 2,000 mm Machine weight: 8,600 kg Note: The operating hours can be found in the last image.

Condition: excellent (used), Year of construction: 2003, operating hours: 60,000 h, Press force / Bending length: 1700 kN / 4080 mm Nsdpfx Aiez I Suke Town TrumaBend control system / Standard: 2D graphics control, color, DELEM.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, operating hours: 44,000 h, Press force / bending length: 500 kN / 1275 mm Nodjz I Sh Rjpfx Ai Town TrumaBend control system / standard: 2D graphic control, color, DELEM.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, operating hours: 49,000 h, Press force / bending length: 500 kN / 1275 mm TrumaBend control system / standard: Nwodpfx Aez I Sd Esi Ton 2D graphic control, color, DELEM.

Condition: good (used), Year of construction: 2002, Used 2-meter CNC press brake Type: V85 Capacity: 2050 x 85 tons Delem CNC control Year of manufacture: 2002 Stroke length: 365 mm Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Automatic Wila NS clamping system Adjustable table Nsdpfxjz Hwi Rs Ai Tswn CNC crowning

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Nedpfx Aiji Igi Ss Tswn Complete with: • Daylight: 390mm daylight • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition