Used Trumpf Press Brake for sale (385)

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 38,990 h, Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V170 Year: 2001 Technical Details Manufacturer: TRUMPF Model: TrumaBend V170 Year of manufacture: 2001 Operating hours: 38,990 h Pressing force: 170 t Bending length: 4080 mm Stroke: 365 mm Frame gap: 3680 mm Table width: 200 mm Throat depth: 410 mm Rapid traverse: 200 mm/s Working speed: 1 – 11 mm/s Return speed: 135 mm/s Connected load: 21.4 kVA Fedpfxeyvqiue Aptepi Oil capacity: 350 l Dimensions (approx.): L 4.70 x W 2.40 x H 2.98 m Weight: 18 t Features • DA 2D graphic control • Hydraulic upper and lower tool clamping • Hydraulic WILA tool system • CNC-controlled crowning • Controlled axes: X, R, Y1, Y2 • 4 movable backgauge fingers, pneumatically clamped • Upper tool: 60°/R4, H 195mm, L = 3,850mm, segmented • Lower tool: V16/30°, R 1.6, H 100mm, L = 3,550mm, segmented • Lower tool: V40/80°, R 5, H 100mm, L = 3,100mm, segmented All information without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm Fpjdpou T Nknsfx Aptei - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: good (used), Year of construction: 1999, machine/vehicle number: 883345, Offer 25513 Technical Data: - Max. working length: 2050 mm - Distance between uprights: 1750 mm - Max. pressing force: 850 kN - Distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 365 mm - Stroke speeds: - Rapid downstroke speed: 200 mm/sec - Return speed: 135 mm/sec - Pressing downstroke speed: 1 - 11 mm/sec - Total drive power: 13 kVA - Space requirement approx.: W 2700 x H 2900 x D 2100 mm - Weight approx.: 9100 kg Equipped with: Fpodpfxsx Exzke Aptei - 5-axis CNC control DELEM, DA - Y1 + 2; X; R; Z - Two-hand control panel with foot switch - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic tool clamping - Pneumatically assisted die table displacement

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: Fjdpfxjx Ew Dqe Aptjpi - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Condition: good (used), Year of construction: 2000, machine/vehicle number: 883454, Offer 25515 Technical data: - Max. working width: 1040 mm - Max. material thickness (at 40 kg strength): 3.5 mm - Table width: 300 mm - Throat depth: 100 mm - Working height: 880 mm - Front angle stop - 3 additional front support arms - Rear stop manually adjustable: 5 – 550 mm - Drive: 400 V / 5.5 kW - Electric foot switch Fjdpox E Rfbofx Aptopi - Required space including rear stop, without front support arms: approx. W 1500 x H 1250 x D 1400 mm - Weight: approx. 1400 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 TruBend 5130X Press Brake Fpjdsxdfqmjpfx Aptei BendMaster Robotic Bending System Control System: TASC 6000 (robot and press are programmed via the machine interface) Press Brake Specifications: Press force: 130 tons Bending length: 3,250 mm Year of manufacture: 02.2016 More information and video available on request ...

Condition: good (used), Year of construction: 2005, functionality: fully functional, Used 2-meter CNC press brake from Trumpf Fpsdpsx I N Awefx Aptoi Model: V85 Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 885669, functionality: fully functional, stroke length: 365 mm, throat depth: 410 mm, clearance between the columns: 2,800 mm, working width: 3,050 mm, bending force (max.): 130 t, TECHNICAL DETAILS Pressing force: 130.0 t Working area Working width: max. 3,050 mm Max. stroke: 365 mm Throat depth: 410 mm Distance between columns: 2,800 mm Fpsdpfsw Dqckox Aptei Number of axes: 6 Control Control: CNC Control type: Delem DA65 Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I + crowning MACHINE DETAILS Dimensions and Weight Overall length: 3,500 mm Overall width: 2,200 mm Overall height: 2,400 mm Weight: 11,000 kg EQUIPMENT WILA hydraulic clamping Angle measurement system Documentation CE marking

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping Fpjdpfx Apsxayl Djtsi - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3230 mm Distance between uprights: 2690 mm Pressing force: 230 tons CNC control: TASC 6000 Number of controlled axes: Stroke: 445 mm Throat depth: 420 mm Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled Hydraulic tool clamping Die shifting CE marking Motor power: 30 kW Dimensions (L x W x H): approx. 4150 x 2350 x 3100 mm Weight: approx. 17 tons Accessories: 2 pcs. bending aids Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Safety device BendGuard Network capability Support arm with height adjustment Fedjxdt U Hopfx Aptopi Condition: Overall in very good condition Little used, 35,000 hours The seller is not liable for typographical or data transmission errors. The machine is visually, technically, and regarding wear in accordance with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Fjdpfxsxdt Ume Aptopi Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Fpjdpfow Tcncjx Aptei Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 9,874 h, stroke length: 600 mm, throat depth: 420 mm, working width: 4,250 mm, bending force (max.): 173 t, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Stroke: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Control type: CNC-controlled Press beam operating hours: 9,874 h Fsdpox R S S Hefx Aptepi EQUIPMENT 5-axis backgauge Hydraulic tool clamping (top/bottom) Die adjustment for bending CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, stroke length: 215 mm, throat depth: 410 mm, bending force (max.): 85 t, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping Adjustable die position Crowning system Fsdpfxoyhmdqs Aptspi Tool cabinet

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 22,325 h, stroke length: 365 mm, operating speed: 10 mm/s, reverse speed: 125 mm/s, throat depth: 400 mm, oil tank capacity: 500 l, total length: 4,600 mm, total width: 2,400 mm, total height: 3,100 mm, overall weight: 24,500 kg, travel distance X-axis: 600 mm, controller manufacturer: DELEM DA 65, working width: 4,080 mm, bending force (max.): 320 t, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 250 mm, distance between stands: 3,680 mm, installation height: 535 mm, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: CNC-controlled, Equipment: documentation/manual, • Pneumatic die shifting • 2 movable support arms Fpjdsyarkaepfx Aptei • Hydraulic tool clamping at top and bottom • CNC-controlled crowning

Condition: ready for operation (used), Year of construction: 1995, machine/vehicle number: 885802, functionality: fully functional, operating hours: 29,650 h, stroke length: 215 mm, oil tank capacity: 150 l, total length: 3,640 mm, total width: 2,210 mm, total height: 2,375 mm, overall weight: 13,000 kg, travel distance X-axis: 600 mm, controller manufacturer: Delem, controller model: DA23e, working width: 3,005 mm, bending force (max.): 130 t, back gauge speed R-axis: 300 mm/s, back gauge travel distance R-axis: 250 mm, installation height: 385 mm, control type: CNC control, back gauge adjustment: CNC-controlled, Equipment: documentation/manual, Trumpf CNC-controlled press brake, used. Type TrumaBend V 130 X, year of manufacture 1995. With hydraulic clamping but without tools. The machine is powered and can be demonstrated. Sale from current location. Fpjdpsw Ud D Uefx Aptsi

Condition: new, Year of construction: 2025, Offer "Comfort Model": * Equipped with a 4-axis rear stop, BendGuard, CNC-controlled wedge compensation, standard tool set, and hydraulic upper tool clamping – ensuring that tool changes are quick and easy. *The images shown are examples and may not reflect the standard scope of the offer. Please contact us for offer details and further information. About the machine: Do you want to enter the world of TRUMPF bending technology while covering a broad spectrum of possibilities? Then the TruBend 1000 is the ideal machine for you. The focus here is on the essentials: reliability, ease of operation, high precision, and, of course, the highest TRUMPF safety standards. With its robust system design, high-quality components, and an easy-to-understand programming system, the TruBend Series 1000 offers ideal conditions for your entry into the TRUMPF bending world. It is ideal for bending box-shaped parts in small and medium batch sizes. Fsdpfsiwxfisx Aptepi Direct and intuitive operation With the TRUMPF control system, numerical and graphical programming is quick and easy. Precise bending Thanks to the 4-axis rear stop, you can position and bend even complex components with precision. TRUMPF quality All over the world, our fast remote service support takes care of your concerns. You can find further technical data in the data sheet or on our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our 100-year company history, we have been involved in the design of many thousands of sheet metal products, especially in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts for software, automation, and smart factories, you will always receive a customized offer tailored to your requirements. P.S.: We are also happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are at your side with both financial and entrepreneurial challenges.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, stroke length: 445 mm, controller model: Trumpf TASC 6000, bending force (max.): 230 t, distance between stands: 2,690 mm, working length: 3,230 mm, TECHNICAL DETAILS Press force: 230 t Fpsdpfxoxn Sums Aptei Bending length: 3,230 mm Distance between frames: 2,690 mm Stroke: 445 mm Installation height: 615 mm MACHINE DETAILS Control unit: Trumpf TASC 6000 Total power requirement: 42 kVA Machine weight: approx. 19,200 kg Machine height: 3,300 mm EQUIPMENT 2 bending aids Wila tool clamping system (top and bottom) 2 hand/foot controls Die shifting Lasersafe in front of the machine Side safety doors 6-axis backgauge

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, operating hours: 49,277 h, stroke length: 445 mm, throat depth: 420 mm, bending force (max.): 230 t, distance between stands: 3,680 mm, working length: 4,250 mm, The control computer was completely renewed in 2025. In addition, the oil and filter were replaced in 2025! TECHNICAL DETAILS Pressing force: 230 t Bending length: 4,250 mm Distance between uprights: 3,680 mm Throat depth: 420 mm Fjdpfsxwn Hdsx Aptepi Ram stroke: 445 mm MACHINE DETAILS Control: TASC 6000 Machine weight: approx. 19,200 kg Operating hours: 49,277 h EQUIPMENT 2 support arms 1 bending aid Light curtain in front of the machine Foot switch 6-axis backgauge

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: B0702A1678, functionality: fully functional, operating hours: 30,979 h, input voltage: 400 V, stroke length: 120 mm, operating speed: 25 mm/s, reverse speed: 220 mm/s, table height: 955 mm, throat depth: 150 mm, total length: 1,900 mm, total width: 1,800 mm, total height: 2,390 mm, overall weight: 2,600 kg, working width: 1,020 mm, bending force (max.): 36 t, distance between stands: 932 mm, installation height: 2,390 mm, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, Machine condition Technical condition: very good, fully operational Used in clean conditions, no structural damage Can be tested and inspected on site Full documentation available for inspection Key features and equipment Bending force: 36 t (360 kN) Bending length: 1020 mm Throat depth: 150 mm Beam stroke: 120 mm CNC control: TRUMPF TASC 6000 / Touchpoint TruBend Backgauge: 6-axis (X, R, Z1, Z2, Y1, Y2) Fjdox Apgvjpfx Aptspi Working speed: 25 mm/s Rapid return speed: 220 mm/s Technical data Distance between stands: 932 mm Installation height: 2390 mm Table height: 955 mm Rear stop range X: 600 mm Z-axis range: 0–1020 mm Weight: 2600 kg Installed power: 7 kW Power supply: 400 V

Condition: used, Year of construction: 2017, functionality: fully functional, bending force (max.): 36 t, TRUBEND CELL 7000 High-End Aut. bending cell Year of construction: 05/2017 ADDITIONAL Functions: ToolMaster Bend (incl. Tool Identification System - TIS) Tool gripper for faster tool change (only in conjunction with ToolMaster Bend and gripper changing module) Conveyor belt Additional system pallet Additional mechanical gripper (without jaws) Additional jaws for mechanical finger gripper Gripper changing module incl. tool cleaning station Multi-suction device with flat suction cups and electromagnets TCB - Thickness Controlled Bending STANDARD configuration: TruBend 7036 Cell Edition - Stable Machine frame - Electro-mechanical direct drive (torque motor) - 6-axis backgauge system with stop sensor - Segmented Wila tool clamps without Tool Identification System - TIS ATTENTION: lower tool clamp in the same design as the upper tool clamp - Switch cabinet air-conditioning BendMaster (15) - Stable frame and manipulator - Bearing load: 15 kg, max. sheet load: 3 kg - Floor tracks: Welded construction with stable guide rail. Travel 3215 mm - Gripper coupling at BendMaster - Electrical drives - Mechanical finger gripper with jaws LoadMaster Bend - Handling system Fsdpfoyalx Rjx Aptopi - Multi-suction device with bellows suction cups - Double sheet detection and separation - Transfer station - System pallet Safety - Safety cell with swing sliding doors: The complete working and danger zone is safeguarded by a safety cell Lighting Control system - PC control with 19“ Touch screen - Mobile operating terminal - Network connection - Teleservice via Internet

Condition: used, Year of construction: 2016, machine/vehicle number: 24398, functionality: unexamined, controller manufacturer: Cybelec, controller model: Modeva Pac 15, control type: CNC control, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Fsdpfx Apox Dh U Iotopi

Condition: used, Year of construction: 2021, Max. pressure 100 ton Max. bending length 3060 mm Distance between uprights 3384 mm X-axis movement 600 mm Length of stroke (extended) 350 mm Daylight (Extended) 580 mm Automatic crowning on lower tool base Fpodpfx Apjxr U Nhotoi Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Sheet metal thickness - max.: 6.4 mm Punching diameter: 76.2 mm Travel distance X-axis: 2,500 mm Travel distance Y-axis: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed (rotary axis): 360 °/sec Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions: 6,400 x 5,800 x 2,100 mm Machine weight approx.: 11,050 kg Operating hours: 30,430 h Fodpfx Apjzk A Ntstjpi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0250A0472, laser power: 5,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS Travel range, X-axis: 4,000 mm Fjdpfx Apszkr T Ujtepi Travel range, Y-axis: 2,000 mm Laser power: 5,000 W MACHINE DETAILS Mains voltage: 400 V / 50 Hz Connected load: 105 kVA Control voltage: 24 V DC Required fuse rating: 3 x 160 A Compressed air connection: 7 to 10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar