Used Cormak Milling Machine for sale (483)

Condition: new, functionality: fully functional, Year of construction: 2026, Sharpening device for drill bits made of HSS or any other hard metals, ensuring precise grinding and easy handling. Adjustable tip angle in the 90°–135° range. Machine features Precise grinding and convenient handling. Sharpening drill bits with ease. Portability due to its modest dimensions. Bljdpfxsvu Aake Ah Isd Dressing wheel promising superb efficiency. Fully equipped; with a handle inside the device. Technical data Drill bits diameters capability ø2–13 mm Angle of the tip 90°–135° Moc 120 W / 230V Motor speed 4800 rpm Approx. weight 9 kg Dimensions 330 x 170 x 160 mm Default equipment Grinding wheel: 1 CBN (for HSS) 11 ER20 collets: ø 3 - ø 13 mm 1 clamping socket

Condition: new, functionality: fully functional, Year of construction: 2026, Drilling & grinding machine with high speed steel or hard metal twist for precise grinding and easy handling. The grinder has an adjustable grinding angle in the range from 90 ° to 135 °. Device characteristics Precise grinding and easy operation. Grinding drills without any skill. Mobility and ease of use thanks to small dimensions. Perfect grinding thanks to the use of a diamond grinding stone. Complete accessories with holder inside the device. Technical parameters Bodpfx Ahjvu Ac Eo Iold Diameter range of drills ø5-32 mm Vertex angle 90 ° -135 ° Power 250W / 230V Engine speed 4400 rpm Weight approx. 32 kg Dimensions 400 x 260 x 300 mm Standard equipment Grinding disc: CBN (for HSS) x 1 12 ER20 sleeves: ø 5 - ø 14 mm 18 ER40 sleeves: ø 15 - ø 32 mm Tool holder ER20 x 1 pc. Collet ER40 x 1pc Support Tools

Condition: new, Year of construction: 2026, functionality: fully functional, The workshop washer is a universal tool that should be found in every service, garage or workshop. It is an indispensable device for fast and inexpensive dirt removal. The possibility of using the washer in a closed room is a great advantage. Bledjuc Tn Ajpfx Ah Isd Washing takes place in a closed circuit, using a washing liquid heated to a temperature of up to 70 °C. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is very suitable for the regeneration of turbochargers and the cleaning of heavily soiled parts made of steel, cast iron, aluminium and other alloys. The lid of the washer is equipped with pneumatic cylinders to increase the safety and quality of working with the washer. The washer has a two-function gun from which either air alone or air with detergent can be discharged. The washed object can be dried with compressed air. The washer is equipped with an intuitive control panel. The water temperature is adjustable. Infinitely adjustable air pressure. Pressure gauge. Separate switch for heating the washing liquid/water. Separate switch for power supply. Technical specifications: Capacity: 160 L Detergent heating: up to 70°C Liquid tray capacity: 8-14 L Operating pressure: 5-8bar Weight: 47 kg Dimensions: 770 x 600 x 1330 mm Air adjustment Pneumatic gun Illuminated cabin Ventilation We kindly inform you that the washer is for self-assembly.

Condition: new, Year of construction: 2026, An industrial radial drilling machine featuring simple and rigid construction, providing a broad range of machining, such as: drilling, reaming, deepening, boring and tapping. Machine features - Drilling machine intended for drilling, tapping and reaming - Limited vibration due to a dedicated design of the machine – additional ribbing along with strengthened cast iron - Oiled gearbox, containing ground and hardened gears made of high-quality steel alloy - High weight and sturdy construction of the machine provide stability and vibration-free operation - Cube table guarantees easy workpiece fixture - Sturdy, ground column of large diameter - Ground lower plate, intended for machining larger elements - Arm height adjustment through a motor - Control panel located at the front of the drilling machine for improved convenience - Mechanical arm and head clamping - Boom arm height easily adjustable through raising motor - Hydraulically operated feed and spindle drive - Ground column surface allows for simple and accurate arm travel - Ground and hardened boom guide - Drilling machine equipped with manual head and column arm limiter - Large speed range offers precise and quick machining Technical data Maximum drilling diameter - 50 mm Axis distance from spindle to column - 350–1600 mm Axis distance from spindle to table surface - 320–1220 mm Spindle extension - 390 mm Headstock horizontal movement - 1250 mm Boom vertical movement - 590 mm Spindle taper - MK5 Spindle speed (16 gears) - 25–2000 rpm Feed range - (16) 0.04–3.2 mm/turn Main motor power - 4.0/5.5 kW Blsdpfx Aheg Rcd Uj Ijd Raising motor power - 1.5 kW Machine dimensions - 2500×1070×2840 mm Weight - 3500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The device is designed to cool tubes in CO2 laser plotters thanks to the use of a cooling unit. The CW5200 chiller keeps the water temperature at the right level. Thanks to such cooling, the tube has stable operating parameters. The CO2 chiller ensures optimal working conditions of the tube, effectively protecting it against overheating and damage. The device is intended for people / companies where a laser plotter is an everyday work tool. Technical Specifications: Power supply - 230 [V] Current consumption - 0.25 ~ 3.1 [A] Compressor power - 0.59 [kW] Cooling capacity - 1.7 kW / 5783 Btu / h / 1457Kcal / h Coolant amount - 360 g Tank capacity - 6 [L] Connections (input / output) - 10 [mm] Working height - 12 [m] Flow - 13 [L / min] Weight - 26 [kg] Dimensions (L x W x H) - 58 x 29 x 47 [cm] Bodpfx Ajg Nkvrjh Iold Security: - Compressor overvoltage protection - Alarm for incorrect water flow in the system - Over temperature alarm The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Blsdpfxeudim Do Ah Iod Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Bledpei D Daqjfx Ah Isd Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 32 mm Distance from spindle to base 340–1125 mm Distance from spindle axis to column surface 330–890 mm Spindle extension 215 mm Spindle taper MK4 Spindle speed 75–1200 rpm Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed (3) 0.10; 0.16; 0.25mm/turn Horizontal plane rotation angle 180° Main motor power 2.2 kW Worktable dimensions 500×330×294 mm Machine dimensions 1400×660×2100 mm Weight 950 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CORMAK 360 is a new, improved model of the most popular metal lathe. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. Suitable everywhere small scale turning has to be done. A NEW, IMPROVED MODEL !!! High-quality and reinforced spindle bearing system New cover system compliant with CE standards The latest model of digital axis reading Reinforced and modernized lathe base with drawers for tools and an extendable chip tray Machine characteristics Reinforced, ribbed surface of the lathe's bed provides maximum reduction of vibration, Additionally precisely ground, hardened bed Digital readout of the axis in standard equipment Equipped with a large spindle bore of 52 mm Also features high-quality and high-end spindle bearing system Efficient machining due to two automatic feeds and equipment with a roller and a draft bolt Hardened wheels in the spindle gear Adjustable overload clutch on pull shaft Feed choice lock: through a screw or a roller The possibility of machining the full range of threads without replacing the gear wheels The removable bridge enables the working of elements with an increased diameter Retractable chip tray and tool drawers for better and efficient work Bsdpfsiz S R Njx Ah Iold Technical data Swing over bed 360 mm Swing over cross slide 220 mm Swing over gap 490 mm Maximum turning length over gap 168 mm Bed width 187 mm Turning length in dead centres 970 mm Spindle tip D1-4 Spindle bore 52 mm Spindle speed 90–2000 rpm Number of spindle speeds 8 Longitudinal feed range 0.055–1.291 mm/turn Transverse feed range 0.014–0.345 mm/turn Maximum tool dimensions 16×16 mm Metric thread 0.4–7 mm Inch thread 4–60 T.P.I. Tailstock quill diameter 32 mm Tailstock quill tip MK3 Motor power 1.5 kW Pump power 0.1 kW Weight 570 kg Dimensions 1890×720×1500 mm Equipment Axes digital readout 200 mm 3-jaw lathe chuck 200 mm 4-jaw lathe chuck Drive plate Steady rest Follow rest Reduction sleeve Dead centre Cooling system Lighting Set of change gears Thread indicator/gauge Handling tools Lathe on a base User manual EC declaration of conformity Factory new machine, under warranty For more information you can visit our web page.

Condition: new, Year of construction: 2026, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Blodpeizr Rljfx Ah Ied Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: new, Year of construction: 2026, The CORMAK HK25 VARIO is a compact milling and drilling machine designed for versatile applications. Perfect for do-it-yourselfers and professionals, this machine offers not only compact size but also exceptional functionality.Equipped with an MK3 spindle taper, this milling machine ensures stability and precision machining. The digital readout of the spindle speed allows precise control of the process, guaranteeing excellent results. Machine characteristics Digital speed readout Digital readout for drilling depth Infinitely variable speed control Precisely bearing-mounted spindle Technical data: DRILLING 20 mm FACE MILLING 16 mm FACE MILLING 63 mm SPINDLE TAPER MK3 SPINDLE FEED RATE 50 mm NUMBER OF SPINDLE SPEEDS variable SPINDLE SPEED RANGE 50-2250 rpm WORK SURFACE OF TABLE 700 x 180 mm MAXIMUM LONGITUDINAL TRAVEL OF TABLE 480 mm MAXIMUM TRANSVERSE TABLE TRAVEL 175 mm MAXIMUM VERTICAL TRAVEL OF THE HEAD 280 mm NUMBER OF T-SLOTS3 T-SLOT DIMENSIONS T12 / 12 mm MOTOR 0,75 kW/1 hp 230V DIMENSIONS Blsdpfxjtz Sxlo Ah Ied 980x600x1010 mm WEIGHT 110 / 125 kg

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Voltage height regulator Bedpfx Ahsg Nknyo Iold Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CNC plasma, oxygen-gas burner is a device designed for cutting out shapes from sheets (any shapes). This machine features simplicity and easy handling. Our CNC cutter ensures high accuracy and repeatability of cutting (0.1 mm), allowing for the burned shapes to be transferred directly to the next stage of manufacturing. Why is it profitable? Possibility of burning using plasma or gases 2 in 1 modest dimensions of the machine allow for placing it anywhere THC voltage height controller precise blowtorch setup a very accurate cut, without further additional machining necessary sheet detection system a handy control panel an intuitive machine handling possibility to cut and gouge steel a library of standard geometrical figures Features and equipment 1500×3000 working area Y-axis 140 mm (clearance) range Usage of rigid and stable construction Gases mixer Gas blowtorch Voltage height controller Blowtorch height regulation system Blowtorch height and stabilisation sensor FastCAM software along with a licence in English USB port as well as internal and external memory User–friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them. NESTING – an automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen * Illustrations are preview only, the device is sold without the table. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Blodoi Apn Uspfx Ah Ijd

Condition: new, Year of construction: 2026, Main advantages: - The CORMAK GOLIAT 660 x 4000 universal lathe can be used for many tasks, such as turning internal and external surfaces, cones, polishing, metric, inch modular and DP threading, drilling and broaching. - The solid cast iron bed construction ensures maximum vibration reduction. Additionally, the bed is hardened and precisely ground. The device bed is extremely resistant to twisting and does not vibrate, which is the basic condition for precise turning. - Central feed switching system, lead screw and feed shaft for threading - The digital readout works in (3) three axes of movement: longitudinal, transverse, upper slide. The processed electronic signal from the optical rulers visualizes the obtained values ​​from movements along the axes on the digital screen. - The lathe is equipped with a high-quality, reinforced spindle bearing system. Modern main spindle bearing with ball bearings - Optimal work results are ensured by a large spindle passage of 105 mm, a 4000 mm center spacing, a 3-jaw lathe chuck of 320 mm, and a powerful 7.5 kW engine. - The rapid longitudinal and transverse feed system significantly shortens the machining time and increases productivity. - Hardened and ground gears in the spindle gear - ensures long-term stability of work. - Equipped with a lead screw and a feed shaft for threading, automatic longitudinal and transverse feed. - Easy adjustment of the spindle speed and automatic feed from the ergonomic control panel on the gear. - Possibility of machining a wide range of threads without the need to replace the change wheels in the guitar. Wide range of threads: metric (22) 1 - 14 mm, inch (25) 2-28 T.P.I, modular (18) 0.5-7 M.P., D.P. thread (24) 4-56 D.P. Turning right and left threads. - Thread turning clock designed for accurate counting of turns. The function is to save time so that in several passes you can unscrew the lead screw nut to manually quickly return the support to its original position. - The bed has a replaceable bridge for turning larger elements, e.g. a disc. This lathe model allows for machining with a maximum diameter of 870 mm with the bridge removed. Technical data Max. turning diameter over bed Ø660 mm Max. turning diameter over support Ø420 mm Max. turning diameter in bridge slot Ø870 mm Slot length 240 mm Centre spacing 4000 mm Max. turning length 3950 mm Spindle bore Ø105 mm Spindle taper diameter and angle Ø113 mm 1:20 Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36-1600 rpm) Number and range of longitudinal feeds 65 (0.063-2.52 mm/rev.) Number and range of cross feeds 65 (0.027-1.07 mm/rev.) Metric thread 22 (1-14mm) Inch thread 25 (28-2 TPI-pitches per inch) Modular thread 18 (0.5-7mm) DP thread 24 (56-4 DP) Rapid longitudinal feed 4.5 m/min. Rapid cross feed 1.9 m/min. Lead screw pitch 12 mm Spindle axis distance from tool surface 28 mm Tool dimension 25x25 mm Max. top slide travel 145 mm Max. cross slide travel 380 mm Tailstock quill diameter 75 mm Tailstock taper MT5 Max. tailstock quill travel 150 mm Tailstock cross travel ±15 mm Bjdpfx Ahovw Abgj Iold Main motor S1/S6 7.5/9 kW / 400V Rapid feed motor 250W Coolant pump 60W, 25 L/min. Dimensions L/W/H 5500 x 1100 x 1450 mm Weight 5 200 kg

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Bsdpfx Asu Snm Ish Isld Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software Bodpjiz A Ezefx Ah Ijld The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, The extractor is characterized by high negative pressure and vibration-free operation. Thanks to its appropriate dimensions, the extractor can be placed under the table of the format saw. All our extractors are characterized by simple operation and quick bag change. The metal impeller of the absorber guarantees quiet, failure-free operation of the device. Very favorable price to the efficiency of the device. The extractor works perfectly with saws, format saws, planers, milling machines, etc. Device description Bodpovuzt Nsfx Ah Iold For shavings, sawdust, dust from milling machines, planers and saws, etc. High suction power Easy movement thanks to the chassis Impeller and metal housing Quick mounting system for the filter and bag Thanks to its compact design, it takes up little space in the workshop, while maintaining high efficiency of 2200 m / h3!!! Technical parameters SUCTION CAPACITY 2200 m³/h BAG DIAMETERS 500 mm INLET DIAMETER 125 mm MOTOR POWER 2.2 kW / 400V DIMENSIONS 1160 x 605 x 750 mm WEIGHT 50 kg

Condition: new, Year of construction: 2026, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions Bledpfxevxhwve Ah Isd 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: new, Year of construction: 2026, Efficient CNC Lathe CORMAK 320x750 SAM6 with Optional Equipment to Adapt to Your Needs. Thanks to the optional equipment, you can adapt the lathe to your needs. Choose from different controls, such as SINUMERIK 828, add a tool probe for automatic measurement, or a hydraulic chuck for quick and convenient operation. A wide range of additional options, such as a moving steady rest, a fume separator from inside the cabin, or even CAD/CAM software, make this lathe a versatile tool ready to meet even the most demanding tasks. Technical data TURNING DIAMETER OVER BED 320 mm TURNING DIAMETER OVER SUPPORT 90 mm (option 135 mm) CENTER DISTANCE 750 mm SPINDLE SPEED 100-2500 rpm SPINDLE BORE 60 mm SPINDLE NOSE MK5 NUMBER OF TOOLS 6 TOOL SIZE 16x16 mm MAXIMUM SHAFT DIAMETER IN BORE 44 mm TAILSTOCK NOSE MT3 MAXIMUM TAILSTOCK TRAVEL 100 mm Bljdpfx Ajwtnvmjh Iod MOTOR POWER 5.1 kW (S1)3.7 kW DIMENSIONS 2370 x 1420 x 2000 mm NET/GROSS WEIGHT 1040/1300 kg Available equipment SINUMERIK 808D control in Polish SIEMENS servo drives manual 3-jaw lathe chuck 6-position turret head set of soft jaws manual tailstock cooling system automatic lubrication system for gears and guides 24V halogen lighting DTR-ka in Polish CE declaration Optional equipment available SINUMERIK 828, FANUC, GSK controls hydraulic chuck hydraulic tailstock moving steady rest steady rest tool probe additional soft jaws hard jaws collet chucks gripper for machined parts bar feeder separator for vapors from inside the cabin separator for waste oil from coolant tool holders CAD/CAM software

Condition: new, Year of construction: 2026, The most powerful centrifugal fan FAN5500 reaches a capacity of up to 8000m3/h. The high vacuum created by the blade system at the right angle and the high motor power can cope with the toughest jobs.Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been created. The design of a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation Bsdpfovughlex Ah Isld drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 8000 m3/h inlet diameter 300 mm discharge diameter 250 mm ENGINE SPEED 2850 rpm DIMENSIONS 670 x 600 x 600 mm MOTOR POWER / VOLTAGE 5.5 kW/400 V WEIGHT 55 kg

Condition: new, Year of construction: 2026, A universal arbor press made of high-quality cast iron. Products of this series provide great capabilities in one reliable and inexpensive device. Simple in handling in such processes as bushing, bending, straightening and reaming. Machine features For mounting and removing bearings, sleeves and pins High-quality cast iron Blodpfx Ahsv Hqfrj Iod Table adjustable in four positions Can be used in all workshops Technical data Pressing force 3 t Maximum arbor height (from fixed table surface) 310 mm Arbor reach 145 mm Fixed table dimensions 190×180 mm Swivel table dimensions Ø166×20 mm Holes in swivel table 18, 25, 36, 46 mm Arbor dimensions 38×38 mm Base dimensions 455×195 mm Height after arbor lowering 570 (without lever) Weight 63 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Bsdpfxji D Ddio Ah Ield Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, The highest quality CORMAK MZS21x1 multi-spindle drilling machine with 21 alternating left / right spindles, enabling the execution of just such number of holes at the same time. Each spindle accelerates to 2840 rpm. Machine description The distance between the individual spindles is 32mm. This means that holes can be made at intervals of 32mm and multiples (by inserting drills into the spindle, for example, for a spacing of 128mm, put them in every fourth, and for a spacing of 64mm, leave every second spindle empty). Advantages 0 ° -90 ° pneumatic head with tilting lock in any position and 45 ° reference point the spindles are rotated by a 1.5 kW electric motor collets for quick clamping of 6-8 mm drill bits two self-leveling pneumatic clamps left / right aluminum fence extension 740mm without limiter Foot pedal for pressing-drilling-loosening high accuracy of components execution ensures precise work two auxiliary rollers 820mm wide quick change of device height adjustment and direct reading of drilling depth! maximum drilling depth of 60mm makes this device meet the expectations of most workshops holes are made at random intervals the distance between the first and last spindles is 640mm Technical parameters NUMBER OF SPINDLES 21 pcs DISTANCE BETWEEN SPINDLES 32 mm MAX. DRILL DIAMETER 10 mm MAX. DRILLING DEPTH 60mm MAX. DRILLING DIAMETER 35 mm MAX. WORK AREA 3000 x 2500 mm Blodpfx Ahevuf Rlo Ied SPINDLE ROTATION 2,840 rpm REQUIRED PRESSURE TO WORK 0.6 - 0.8 Mpa MOTOR POWER 1.5 kW DIMENSIONS WITHOUT TABLE EXTENSION 1400 x 1300 x 1400 mm

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 70 mm. Machine characteristics Bending radius adjustable by means of upper clamping device with vernier scale. Application: Bending of profiles and pipes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Left/right-hand operation Standard equipment Bjdpfxou Snkgo Ah Isld Side guide rollers foot pedal/ universal rollers Driver's manual in Polish CE declaration Technical data Round tube [mm] Ø 70 x 2 Rectangular profile [mm] Ø 60 x 60 x 3 Round bar [mm] Ø35 Solid rectangular bar [mm] Ø 35 x 35 Shafts diameter [mm] 50 Motor power [kW] S1 1.5/ S6 2.2 Power supply 3 phase, 400 V Dimensions (L x W x H) 900 x 850 x 1700 Weight [kg] 550

Condition: new, Year of construction: 2026, A device designed for quick setting of knives on the planer shaft. It is equipped with an accurate scale and can be used for any diameter of the knife shaft without having to dismantle it from the planer. Bjdovzycispfx Ah Ield Manufacturer: Cormak

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x1500 - 2x larger casting and solid cast iron bed construction, equipped with a 12-speed gearbox with a powerful 5.5 kW/400V induction motor - maximum torque, large spindle passage 82 mm. Main advantages: - Versatile applications: The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction: The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision: The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle: Reinforced bearing system in the spindle and large passage of 82 mm guarantee optimum efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm, a 5.5 kW motor. - Efficiency and productivity: The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading: Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 T.P.I., modular (34) from 0.1 to 7 M.P. and DP (50) from 4 to 112 D.P. - Precise counting of threads: The lathe is equipped with a thread turning clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use: The intuitive control panel on the gear allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements: The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690 mm x 240 mm Tipper height 230 mm Distance between centers 1500 mm Bed width 300 mm Maximum knife cross-section 25 x 25 mm Total cross slide feed 290 mm Total upper slide feed 120 mm Spindle bore diameter ø82 mm Spindle nose D1-8 Spindle socket (taper) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (thread per inch) (60) Metric threads 0.1-14mm (41) teeth per inch gear pitch dia. 4-112D.P. (50) Bodpfx Asvzzqbjh Isld Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev. (42) Cross feed 0.014-0.784mm (42) Total tailstock bearing liner feed 120mm Tailstock bearing liner diameter ø60mm MT gear modules no. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 2720x1040x1340mm Weight 2445kg