Used Emco Milling Machine for sale (147)

Condition: used, Year of construction: 2013, Technical details: bar material dia.: 65 mm turning length: 644 mm turning dia. over bed: 600 mm turning diameter over slide: 430 mm y-axis: 100 (+-50) mm turning speeds: 2x 5.000 1/min positive location each: 2x C-Achse, 0,001° Grad Sub spindle: ja/yes turret (x-stations): 2x 12 VDI 30 Pos. driven tools: 2x 12 Pos. turning speeds: 2x 4.000 1/min Crjdpephuwqsfx Af Hjk control: FANUC 18 iTB total power requirement: 30 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding" *

Condition: used, functionality: fully functional, EMCO Lathe Maximat V13 380 Volt Serial No.: D1E8706022 Cjdpfxov H Ukls Af Herk MB No.: 99826 Condition: used Location: 86928 Hofstetten Price: €8,900 net

Condition: good (used), Year of construction: 2008, Offered here is a machining center from the manufacturer Emco Famup equipped with a 4th axis and tailstock. The machine will be loaded onto a truck free of charge. Manufacturer: Emco Famup Model: EmcoMill E900 Year of manufacture: 2008 Control: Siemens Sinumerik 810D - ShopMill Technical data: Travel paths X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 360*0.001° Clamping surface of table: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Csdpfx Ajxrvrdsf Hsrk Spindle speed: max. 12,000 rpm Spindle power: 13 kW Coolant supply through spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 t Dimensions: approx. 4000x2400x2900 mm

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm Csdpfxexrg Dwe Af Hsrk number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved!

Condition: excellent (used), Year of construction: 2008, 1 Universal Lathe EMCO Max-Turn 65, year 2008 Codextm A Nepfx Af Herk Control: Siemens Sinumerik 840 D Travel X/Z: 260 mm x 610 mm Max. turning diameter: 500 mm Swing over bed: 610 mm Swing over cross slide: 360 mm Spindle bore: 73 mm Main spindle speed: 0–5000 rpm Counter spindle speed: 0–4000 rpm Z2-axis travel: 580 mm C-axis, Y-axis Disc turret with 12 driven stations Parts catcher, chip conveyor

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopMill, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopMill Speed : 10000 rpm Movement X/Y/Z : 350/250/300 mm Spindle: Technology:Directdrive Speed:10.000 rpm Power (max.):7 kW Torque (max.):41 Nm Crsdpfexthpwox Af Hek Taper:SK30 Workingtable: Clampingsurface:520 x 300 mm Tabeloading (max.):100 kg In general: Toolmagazine:20 Stations Rapid travers in X/Y/Z:24 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump with 8 bar Workpiecemeasurement:Touch probe, Marposs WRP 45 Toolmeasurement:Probe, Marposs TS30 4.-Axis:Walter TANI 100 NEG with 3-Jaw chuck and Tailstock Oilmistseparation:Mechanical extraction, Reven Setup operations:Electronic Handwheel Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholders

Condition: good (used), Hardness tester functional Codpexr Atbofx Af Hjrk

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Crsdpfx Asxp Hudjf Hok

Condition: good (used), Offered here is a machining center from the manufacturer Emco Famup. The machine will be loaded onto a truck free of charge. Manufacturer: Emco Famup Model: EmcoMill E900 Year of manufacture: 2010 Control: Siemens Sinumerik 810D - ShopMill Technical data: Travel X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Cjdpjxrvg Ujfx Af Hork Spindle speed: max. 12,000 rpm Spindle power: 13 kW Coolant supply through spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 t Dimensions: approx. 4000x2400x2900 mm

Condition: excellent (used), EMCO Model E 900 Control type SIEMENS SINUMERIK 810 D Table dimensions 1000 x 520 mm Linear guides ✓ Travel X-axis 900 mm Y-axis travel 500 mm Travel Z-axis 500 mm Axes 3 Spindle speed 12,000 rpm Spindle mounting ISO 40 - DIN 69871 Tool magazine 20 places Coolant supply through the spindle ✓ Csdpfx Afepgng Hs Hork Spindle motor power 13 kw Year 2017 CE machine ✓ Overall dimensions 2570 x 2445 x H 2920 mm

Condition: excellent (used), functionality: fully functional, EMCO Maximat Super 11 – Precision Lathe in Very Good Condition For sale is a used EMCO Maximat Super 11, a robust and precise universal lathe "Made in Austria." This machine is ideally suited for workshops, training centers, or demanding hobbyists who value quality and accuracy. The machine is pre-owned but well-maintained and fully operational. All gear shifts are smooth, the guides are in good condition, and the machine has been regularly serviced. Technical Specifications: Center height: 140 mm Distance between centers: 600 mm Spindle speed range: 55 – 2200 rpm (8 geared steps) Tailstock: MT2 taper Tool holder: Quick-change toolpost Lighting: Integrated LED work light Weight: approx. 360 kg Dimensions (L × H × W): approx. 1.3 m × 1.2 m × 0.6 m Condition & Accessories: Machine runs quietly with low vibration Tailstock is smooth and easy to adjust with high precision Quick-change toolpost included Credpfx Ajxqx Nvef Hsk LED work light for optimal visibility Various clamping devices or tools can be purchased additionally upon request (by arrangement) Price: The price is within a reasonable range and negotiable. Open for price discussions upon serious interest. Miscellaneous: Collection preferred, viewing by appointment possible Machine can be shown under power

Condition: used, Year of construction: 2005, Machine used for training purposes Emco E 65, year of manufacture 2005, control Siemens 840 D, travel X/Z 210/610 mm, maximum bar capacity Ø 65 mm, driven tools, Crodpfx Afowv N Sue Hok C axis, main spindle up to 4,200 rpm, 12-position turret, VDI 30 tool holder, tailstock, chip conveyor, coolant system, oil mist extraction,

Condition: excellent (used), Year of construction: 2023, Work Area Longitudinal slide travel (X) 350 mm Cross slide travel (Y) 250 mm Usable vertical slide travel (Z) 300 mm Distance spindle nose – table surface (min.-max.) 120 – 420 mm Milling Table Cast iron table, ground Clamping surface (LxW) 520 x 300 mm Table surface height above floor 900 mm Max. table load 100 kg Number of T-slots 5 T-slot size acc. to DIN 650 12 mm T-slot spacing 45 mm Milling Spindle Speed range – direct drive 0 – 10,000 rpm (Three-phase asynchronous motor) Torque (100/60% DC) 33 / 41 Nm Power (100/60% DC) 7 / 8.5 kW Tool holder per DIN ISO 69871-A SK 30 Pull stud per DIN ISO 69872 (similar to 7388/2) M12, Type A Tool holder balanced G2.5 (per DIN ISO 1940, at 10,000 rpm) Slide Drives (Servo Motors) Feed rate in X / Y / Z 24 m/min Crjdpjw N Nvlsfx Af Hjk Rapid traverse speed in X / Y / Z 24 m/min Feed force in X / Y / Z 3000 / 3000 / 4000 N Mean positional scatter per VDI 3441 in X / Y / Z 4 / 4 / 4 µm Tool Magazine Tool changer based on S-arm principle with random management Number of tool stations 20 Direct tool change time 2.5 s Max. tool diameter Ø 63 mm Max. tool diameter with adjacent slot empty Ø 80 mm Max. tool length 200 mm Max. tool weight 5 kg Clamping force 1500 N Max. total tool magazine load 60 kg Coolant System (Option) Coolant supply at milling spindle via 3 nozzles Tank capacity (standard) 140 l Delivery pressure at 50 Hz 3.5 bar Flow rate at 3.5/1 bar 15 / 65 l/min Pneumatics Supply pressure 6 bar Connection line Ø 10 mm Supply volume 50 l/min Compressed air quality per DIN ISO 8573-1 Purity class 4 Lubrication System Main spindle bearings Lifetime grease lubrication Guideways automatic central oil lubrication Feed screws automatic central oil lubrication Electrical Connection Power supply 3/PE 400~ V Max. voltage fluctuations +10 / -10 % Frequency 50 / 60 Hz Machine connected load 9 kVA Max. main fuse for machine 20 A gG Required short-circuit power 700 kVA Dimensions / Weights Overall height 2200 mm Installation area (WxD) (excluding coolant and options) 1600 x 1710 mm Total machine weight 1970 kg (excluding coolant and options) Coolant tank (standard, empty) 60 kg Chip Conveyor Hinged belt conveyor for wet and dry machining Discharge height 500 mm 4th Axis / NC Rotary Table Resolution 0.01° Max. speed 44 rpm Max. torque 20 Nm

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm Crsdeu Ixw Ajpfx Af Hok turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,261 h, functionality: fully functional, machine/vehicle number: M-077.084.07, empty load weight: 4,800 kg, Equipment: chip conveyor, MACHINE DETAILS Weight: 4,800 kg Operating Hours Spindle hours: 11,261 h Control system on hours: 125,668 h Codexpvwzepfx Af Hork EQUIPMENT Conveyor belt (FAMUP 405-1498-1, 352 kg)

Condition: used, Technical Data: Centre height: 275 mm Distance between centres: 3000 mm Swing diameter over bed: 550 mm Swing diameter over cross slide: 340 mm Spindle bore: 105 mm Spindle nose: Camlock 8" Speed range: 0 - 2500 rpm Motor power: 19.5 kW Equipment: - CNC control FAGOR 8055 Csdpfx Afsxpgrpe Hjrk - 4-position turret head - 3-jaw chuck ø 315 mm - Steady rest

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Cjdpfxsxmkcae Af Herk

Condition: excellent (used), EMCO TURN 365 – CNC Turning Center For sale: EMCO TURN 365 CNC turning center, in excellent technical condition, immediately available and ready for operation. Year of manufacture: 2000 EMCO Turn 368/65 Operating hours: 53,000 Year: 2000 Chip conveyor Drip tray Maximum swing diameter over bed [mm]: ø600 Swing diameter over cross slide [mm]: ø360 Maximum turning diameter [mm]: ø310 Maximum workpiece length [mm]: 520 Maximum bar capacity [mm]: ø65 Distance between centers (spindle nose – tailstock center) [mm]: 669 X-axis travel [mm]: 210 Z-axis travel [mm]: 610 AC motor power (Sinumerik / Fanuc) with integrated holding brake [kW]: 24.4 / 22 Spindle speed range (stepless) [rpm]: 60 – 3200 Max. torque (Sinumerik / Fanuc) [Nm]: 267 / 242 C-axis (rotary axis) on main spindle Rotary axis resolution [°]: 0.001 Rapid traverse speed Siemens / Fanuc [mm/min]: 1000 / 100 Automatic tailstock, hydraulically actuated Tailstock travel [mm]: 500 Max. tailstock force [N]: 8,000 Travel speed [m/min]: approx. 20 Tailstock quill taper: MT 4 Disc turret with directional logic, optionally with driven tools Number of tool stations: 12 Tool holders according to DIN 69880 VDI 30 Tool cross-section for square tools [mm]: 20 × 20 Boring bar diameter [mm]: ø32 Number of driven tool stations: 12 Speed range [rpm]: 0 – 5,000 Max. drive power [kW]: 5 Max. torque [Nm]: 20 • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4,000 kg • Installation dimensions (L × W × H): approx. 4,000 × 2,000 × 2,000 mm — Condition & Scope of Delivery The machine is in very well-maintained condition. The offer includes comprehensive documentation including operator’s manual. • Inspection possible at any time • Free loading • Delivery by arrangement possible — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices subject to VAT. Errors and alterations excepted. Crodpfx Aexiy Ukef Hjk

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 300 mm, turning diameter: 200 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 1,600 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 300 kg, Operating voltage: 230 V Codpfx Afow Ivvie Hork Frequency: 50-60 Hz Rated current: 11 A Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Turning length: approx. 300 mm Center height over bed: approx. 100 mm Travel: X: approx. 100 mm Z: approx. 200 mm The machine is equipped with a tailstock, a three-jaw chuck, a special tool turret including a mobile workbench and suitable accessories.

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Cjdpfeu N Avxex Af Hsrk Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: ready for operation (used), Year of construction: 2005, operating hours: 25,217 h, General Data Measurements width 3400 mm Measurements depth 2550 mm Codpfx Afsxfcrds Hjrk Measurements height 2300 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 280 mm, X-Axis Rapid Traverse 24 m/min Y-Axis Movement 100 mm +/-50 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement Z/Z2/Z3=900/750/750 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes General Data Measurements width 3400 mm Measurements depth 2550 mm Measurements height 2300 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 280 mm, X-Axis Rapid Traverse 24 m/min Y-Axis Movement 100 mm +/-50 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement Z/Z2/Z3=900/750/750 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us. Application Types Turning

Condition: ready for operation (used), Year of construction: 2007, turning diameter over cross slide: 190 mm, turning length: 700 mm, turning diameter: 340 mm, spindle bore: 50 mm, Emco EMCOMAT-17D Distance between centers: 700 mm Swing diameter over bed: 340 mm Swing diameter over carriage: 190 mm Spindle bore/pass-through: 50 mm Spindle speeds: 35–3000 rpm Infinitely variable speed adjustment between gear ranges. Crjdpfoxc H Dfex Af Hek Equipped with longitudinal and cross feed. 2-axis digital readout on X and Z axes. Multifix quick-change tool post.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: - year of construction 2006 Crodsu N Dpmjpfx Af Hjk - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Crjdju Ixwiepfx Af Hok Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min Crodevvtpxspfx Af Hok max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *