Used Hurco Milling Machine for sale (165)

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Control: Hurco Ultimax Knodpfx Aoy T Hkpokwjb Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Equipment: - various accessories Condition: used Machine is complete Inspection possible while powered on

Year of construction: 2013, operating hours: 9,073 h, condition: used, machine/vehicle number: L8H-11203053DFBH, Travel ranges (X/Z): 203/550 mm, max. turning diameter: 256 mm, 12-station turret with driven tools, max. speed: 4,000 rpm, tool holder, WinMax control system, chip conveyor, coolant unit. Knjdpezha E Hofx Akwjb

Condition: ready for operation (used), Year of construction: 2006, operating hours: 63,442 h, controller manufacturer: HURCO, controller model: UltiMax, number of axes: 3, This 3-axis Hurco VMX 42 was manufactured in 2006. It features a tool tray with 24 positions, a chip conveyor, and a coolant tank with pump. Operating hours total 22,612.4, with spindle hours at 6,344.2. Consider the opportunity to buy this Hurco VMX 42 vertical machining centre. Contact us for more information. • Tool tray with 24 tool positions • Operating hours: 22,612.4 h • Spindle hours: 6,344.2 h Additional equipment • Chip conveyor • Coolant tank with pump Knedpfx Asyb Ryijkwsb

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Knodpfx Aozwhk Aekwjb Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Tool magazine for 24 tools, SK 40 DCF software

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Kedpfx Akozwhk Njwonb Through-spindle coolant 20 bar

Year of construction: 2004, condition: excellent (used), TECHNICAL DATA Travel X 760 mm travel Y 510 mm travel Z 610 mm table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm distance spindle to table min./max. 150/762 mm Spindle mounting steep taper DIN 69871 ISO 40 spindle speeds 10 - 10'000 rpm Drive power (30 min/const. ED) 11 kW Torque max. 236 Nm Power constant from 500 rpm Coolant tank 190 l Ball bearing linear guide in X,Y,Z axes Eilang X / Y / Z 30 / 30 / 20 feeds programmable 3,0 - 7600 mm/min positioning accuracy +/- 0,01 mm repeatability +/- 0,005 mm milling feed rate 3,0 - 11400 mm/min table load 1000 kg Automatic tool changer (double arm) 24 stations Max. Tool diameter 80 mm Max. tool length Tool length 300 mm Max. Tool weight 7 kg Machine weight 4700 kg Space requirement L x W x H (footprint) 3870 x 4170 x 2775 mmINCL. - Coolant system Kjdpfel Tpmdex Akwonb - Coolant spray gun - Chip splash guard cabin - Flushing system to support chip disposal - Machine light - set of machine shoes - rigid thread cutting - spiral conveyor in the chip room - Pocket milling with islands - Electronic handwheel - ULTIMAX 4 control - 2 VGA color screens (text + graphics) - 2 software units (1 x plain text dialog programming + 1 x for ISO code programming) via interface RS-232 C / V24 access for CAD / CAM or external programming station - Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS compatible 3.5 '' 1.44 MB drive. System internal self-diagnosis, DOS directory structure, software version 2.xx Servo technology DUAL DSP 40MHz

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 1016mm x 508mm x 508mm, Ksdpfx Aozh Hw Nskwonb table size 1168mm x 508mm, 10000rpm spindle, 20 station ATC, BT40 spindle taper, input 15kW, Hurco WINMAX 5 control, coolant, swarf auger.

Condition: ready for operation (used), Year of construction: 2006, TECHNICAL DATA Knedpfx Asr Ar N Uokwsb Travel X 610 mm Travel Y 510 mm Travel Z 610 mm Table dimensions 760 x 510 mm Table clamping surface 760 x 510 mm T-slots 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/760 mm Spindle holder steep taper DIN 69871 ISO 40 Spindle speeds 10 - 10,000 rpm Torque (at 500 rpm) 142 Nm Drive power (30 min/const. ED) 7.5 kW Ball bearing mounted linear guides in X,Y,Z axes Coolant tank 150 l Rapid traverse for X/Y/Z axis 30/30/20 m/min Feed rates programmable 3.0 - 7600 mm/min Positioning accuracy +/- 0.010 mm Repeat accuracy +/- 0.005 mm Milling feed in mm/min 3.0 - 11'400 Table load 700 kg Automatic tool changer with double arm 24 stations Max. tool diameter Tool diameter 80 mm Max. Tool length 300 mm Max. Tool weight 6.8 kg Machine weight 4100 kg Space requirement L x W x H (footprint) 3470 x 1980 x 2730 mm Power fuse 24 A Renishaw NC4 Laser

Condition: excellent (used), Year of construction: 2007, Ultimax 4 control system Travel ranges X/Y/Z: 610 x 510 x 610 mm Ksdpoztr Epofx Akwenb Table size: 760 x 510 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Chip removal system

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), Kedpfjzh Nczox Akwjnb 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 18,571 h, functionality: fully functional, controller model: WINMAX, table width: 510 mm, table length: 760 mm, number of axes: 5, TECHNICAL DETAILS Table size: 760 x 510 mm Tool changer: 24 positions MACHINE DETAILS Control: WINMAX Knodpfx Akoxxlc Sewjb Operating hours: 18,571 h EQUIPMENT Fully integrated 4th/5th axis Simultaneous milling 5th axis can be removed when not required

Condition: used, Year of construction: 1999, Travel X/Y/Z: 610mm/406mm/508mm, max. spindle speed: 8000rpm, spindle power: approx. 7.5kW, rapid traverse X/Y: 24m/min, rapid traverse Z: 15m/min, spindle taper: SK40, tool capacity: 24, table dimensions X/Y: 750mm/400mm, max. table load: approx. 350kg, control: Hurco Ultimax 4 Dual Screen. Weight: approx. 4000kg. An on-site inspection is possible. Knodpfx Aezwfrqjkwsb

Condition: used, Year of construction: 2001, functionality: fully functional, Control system: ULTIMAX4 DSM Table size: 762 x 510 mm Max. table load: 1350 kgs X-travel: 610 mm Y-travel: 510 mm Z-travel: 610 mm Spindle speed: 10000 rpm Ksdpjzuphqsfx Akwsnb Spindle taper: SK40 Tool magazine: 24-station Drive power: 11 / 9.4 kW Power requirement: 400V, 32A Weight: 4300 kgs Dimensions (LxWxH): 2350 x 2600 x 2700 mm Accessories, equipment: - Software options: DXF, 3D, Pocket/Islands, Ultinet (network card), Ramp/Helical, rigid tapping - Chip auger - Coolant tank - Signal lamp - Machine mounts - Electrical MPG - Manuals in PDF Description:The machine is in good condition and operates precisely. It is being sold due to a new equipment acquisition.Please note that the machine must remain in operation until mid-to-late September.

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor. Knedpfx Akszh I Agswsb

Condition: good (used), Year of construction: 2002, functionality: fully functional, Hurco VMX 64, Year of manufacture: 2002, Control system: Ultimax 4, Travel range X/Y/Z: 1625/860/760 mm, Tool changer: 40-position, Spindle speed: up to 8,000 rpm, High-pressure coolant system, Knedpfx Aksy T Iuvewsb Chip conveyor system, Pocket with islands, DXF, Simultaneous threading, Ultinet, Workpiece positioning detection, Ramping/helix plunging, Advanced Velocity Control, Z-axis cover defective.

Condition: good (used), Year of construction: 2004, operating hours: 6,900 h, functionality: fully functional, Controller: ULTIMAX4 DSM with LCD screens Table dimensions: 762 x 355 mm X-axis travel: 660 mm Y-axis travel: 355 mm Z-axis travel: 455 mm Spindle speed: 10 – 10000 rpm Spindle taper: SK40 Tool changer: 16-station Main drive power: 11 / 9.4 kW Machine weight: 2800 kg Machine dimensions: 1800 x 1600 x 2500 mm Accessories: - Software version 2.37 with English user interface - Software options: Rigid tapping, Pockets/Islands, AVC, Helical/Ramp, ULTINET (Network) - Coolant system - Signal lamp Knsdpfxozmhy Ao Akweb - USB interface - Portable electronic handwheel - Machine feet The machine is in good used condition. Still under power. It is being sold due to company liquidation.

Condition: used, Year of construction: 2000, functionality: not functional, Hurco VMX 50 machining center with Ultimax control IKZ chip conveyor Knedpfx Akjt H I Ugowjb

Condition: excellent (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Knedpszwhlaofx Akwjb Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 06584, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Hurco Ultimax, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Axes: 3 Travel in X-axis: 1,020 mm Travel in Y-axis: 510 mm Travel in Z-axis: 610 mm Spindle speed (max.): 8,000 rpm Kodszuw A Njpfx Akwjnb Motor power: 15 kW Table length: 1,220 mm Table width: 510 mm MACHINE DETAILS Control system: Hurco Ultimax Drive system: CNC Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,350 x 2,400 mm Weight: 5,000 kg Shipping packages: 1 EQUIPMENT Documentation CE marking

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Internal coolant system Chip conveyor Ksdpfxezmy T Ue Akwsnb Detachable handwheel

Condition: ready for operation (used), Year of construction: 2003, X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible. Knodpfoza E Ryex Akwjb

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 10 – 12000 rpm Tool magazine 20 positions Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Accessories - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger Knjdpjy Du I Rsfx Akweb - Signal light - Machine feet

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,991 h, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine. Additional equipment • 24-fold changer Kedsx Enl Eepfx Akwonb • Chipping screw • Electrical handwheel • Incl. KITAGAWA round table • IHK 30 bar Machine Benefits Technical Machine Benefits • Table size: 760 x 510 mm • Spindle cooling: yes • Number of tool positions in atc: 24 Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 15,000 rpm, input 15Kw, Hurco Winmax 5 Control, Spindle taper BT40, 30 ATC, Kedpfx Aszh Hvxokwonb Coolant, Low volt light, Swarf Conveyor.

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, table load 2,000 kgs, Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Knodpfx Aozh I Ebekweb Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe