Used Hurco Milling Machine for sale (153)

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 Fgedpfx Acjx Iikbeioi - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 8.9 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 533 x 406 483 [mm] - Rapid traverses rates (X/Y/Z) : 24 [m/min] - Distance table / spindle nose (min./max.) : 36-519 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 198 [mm] - Maximum weight upon table : 150 [kg] * Distance table / spindle nose (min./max.) : 36-519 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2994 x 2666 mm [mm] - Machine height : 2669 [mm] - Machine weight : 3360 [kg] MACHINE HOURS - Number of working hours : 22000 [h] Fsdpfx Acjuhbubjijgi EQUIPMENT - CNC : HURCO WINMAX V09.01.393.24 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : HURCO * travel 4th axis : -30 / +110 [°] * indexing precision 4th axis : 0,001 [°] * travel 5th axis : 360 [°] * indexing precision 5th axis : 0,001 [°] - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chip auger - Tool probe : Renishaw NCRTX/RX

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Fgedpfxjzl Hbcj Acisi Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: used, Year of construction: 2007, 2007 Hurco VM3 CNC Vertical Machining Centre With Hurco Max Control Fsdo Ad Efnjpfx Aciegi Table Dimensions 1,321 x 457mm (3 'T' Slots). Maximum Table Load 545kg. Axis Travel 'X'=1,270mm, 'Y'=457mm, 'Z'=457mm. Min/Max Height From Spindle Nose To Table 101-736mm. Rapid Traverse 'X'=24m/min, 'Y'=24m/min, 'Z'=19m/min. 20 Position ATC. Maximum Spindle Speed 8,000rpm (15kW Motor). Spindle Nose ISO 40. S/No. H-V30139 (2007). With Coolant System, Auger Conveyor, Filtermist FX5002 Oil Mist Extractor, Air Gun, Wash Gun, Signal Tower, Work Lamps & 4th Axis Enabled. Overall Dimensions L2,830 x W2,770 x H2,576mm. Weight 4,245kg.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,270 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Hurco VMX42t was manufactured in 2007. It features an X-axis travel of 1067 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1270 x 610 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42t vertical machining centre we have for sale. Contact us for further details. - Control System: Ultimax- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 15 KVA- Full Load: 30 KVA- Interrupt Capacity: 10,000 AMPS- Optional Equipment: Chip conveyor, Simulation graphics, Tool and material library, Pocket milling with island, Synchronous thread cutting without compensating chuck, High-pressure through-spindle coolant Fgodozwgztjpfx Acisi

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of axes: 3 Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Table size Y-axis: 610 mm MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Fgjdpfx Acozaprzsioi Drive power: 12 kW Torque: 237 Nm Operating hours: approx. 7,200 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: used, Hurco TM6i, 2 Axis CNC Lathe, Year 2013, Tailstock, Collet Chuck, Swarf Conveyor, Air Bench Filtermist, Hydrafeed MSV 65 Bar Feed Unit, with 3 Jaw Chuck Hurco TM6i CNC turning centre with slant bed design. Compact and reliable CNC lathe suitable for precision machining, subcontract engineering and production work. The Hurco TM6i CNC Turning Centre is a compact slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, toolroom and general manufacturing applications, the machine offers a practical solution for a wide range of turning requirements. Manufactured by Hurco, a respected builder of CNC machine tools, the TM6i is designed to provide reliable performance, machining accuracy and operator-friendly operation. Its rigid construction and compact footprint make it well suited to both production environments and smaller engineering workshops. The machine is capable of producing a wide variety of precision components and represents an excellent opportunity to acquire a quality CNC turning centre from a recognised manufacturer. Available for inspection at our Prestwick, Ayrshire facility. Fgedpfxs Aggphe Aciei Specifications: Swing: 15.94" Machining Length: 13.4" Chuck Size: 6.65" Bar Capacity: 1.75" Power: 17.5 hp Max RPM: 6,000 RPM Turning Dia: 12.4"

Condition: used, Year of construction: 2014, Milling machines Fjdpfx Acjzguhyoijgi Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Max. part weight 340 kg Number of tool pockets 20 Fgjdpfx Acezwwndoioi Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,625 mm, travel distance Y-axis: 864 mm, travel distance Z-axis: 762 mm, table width: 1,676 mm, table length: 889 mm, table load: 2,500 kg, spindle speed (max.): 12,444 rpm, number of axes: 3, This 3-axis HURCO VMX64 was manufactured in 2007. It features a travel of 1,625 mm in the X-axis, 864 mm in the Y-axis, and 762 mm in the Z-axis. The machine includes a table size of 1,676 x 889 mm and a maximum table load of approximately 2,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX64 vertical machining centre we have for sale. Contact us for further details. Fedpfe Ahkauox Acijgi - Control: HURCO Ultimax with WinMax (hard drive replaced, WinMax reinstalled) - Conversational and DIN/ISO programming (G-code), two screens, electronic handwheel - Tool taper: SK 40 - Tool changer: 40 stations - Power connection: 3 x 400 V EQUIPMENT - Chip conveyor - Coolant/filtration system KNOLL gravity paper band filter type PF 350/1050, YOM 2007 (filter capacity up to 350 l/min emulsion) - Spindle cooler (HABOR) - Oil mist extractor SARA (Type UC350/03) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2002, x-travel 1.060 mm y-travel 610 mm z-travel 610 mm control Winmax 9 (Upgrade) table-size 1.270 x 610 mm max. table load 1.100 kg number of T-slots 5 T-slot - width 18 mm T-slot - distance 100 mm turning speed range - milling ~ 10.000 U/min Fgodpfx Acox R Enhsiji power capacity - milling spindle 18 / 11 kW tool taper SK 40 Tool changer 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool length 300 mm max. tool weight 7 kg feed ~ 15,4 m/min rapid traverse X-axis 30 m/min rapid traverse Y-axis 30 m/min rapid traverse Z-axis 20 m/min weight of the machine ca. 7,0 t dimensions of the machine ca. 3,5 x 3,2 x 3 m Machining Center - Vertical HURCO VMX 42

Condition: good (used), Year of construction: 2011, HURCO CNC machining center VMX 60 t X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Table size 1,680 x 660 mm Spindle speed 12,000 rpm Tool holder SK40 Tool changer, 24 positions Equipped with WinMax control Includes: Internal coolant system (IKZ) Spindle cooler Coolant spray gun Chip splash guard cabin Signal light for machine operating status Fodpfjxvtfpsx Aciogi Flushing system to assist with chip removal Machine lamp Set of machine leveling pads Machine manual on CD 2 color screens (text + graphics) Simulation graphics Tool and material library Detachable electronic handwheel Pocket milling with islands Synchronous tapping (thread cutting without compensating chuck)

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Fgsdpjz Ei Amjfx Aciji Tool changer Magazine slots 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Fgodpfx Acjtrhq Hsiji Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm Fedpfx Aevh Nbusciegi feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Control HURCO WINMAX (Graphics, Touchscreen) Max. swing diameter 335 mm Max. turning diameter 305 mm Distance between centers 477 mm Spindle bore D52 mm Chuck size 203 mm Turret 10 stations (BMT) Spindle speed 4,800 rpm Power 11/14 kW Machine weight approx. 3,950 kg Dimensions approx. 3,000 x 2,300 x 2,000 mm Accessories - Hydraulic tailstock Fjdpfe Agadkex Acijgi - Coolant system - Built-in tool setter - Workpiece chuck - D200 3-jaw hydraulic chuck with jaws - Parts catcher - Machine lamp - Chip conveyor The machine is in very good condition. It can be inspected under power from calendar week 46 (CW 46) in our showroom.

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity Fgjdpfx Ajzcpu Isciji

Condition: excellent (used), Year of construction: 2017, Hurco VMX30i vertical machining center Year: 2017 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Fgsdpezf Rxfefx Aciei Weight 4800 kgs Accessories/options: - With linear scales on all axis, with higher accuracy standard - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling - Software options as per on the pictures Under power in our warehouse. Clamping units, vices, and dust extractor are not the scope of the delivery.

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Technical Specification Taper Size ISO 40 Fsdpfjzylx Asx Aciegi

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,262 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, controller manufacturer: HURCO, controller model: WinMax, total height: 2,500 mm, total width: 3,000 mm, table load: 250 kg, overall weight: 7,200 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, product length (max.): 4,500 mm, number of axes: 5, This 5-axis Hurco VMX42U vertical machining centre was manufactured in 2014. It features an impressive X-axis travel of 1,067 mm, Y-axis travel of 610 mm, and Z-axis travel of 520 mm. The machine includes an integrated tilting rotary table and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42U machine we have for sale. Contact us for further details. Axes • Number of CNC-controlled axes: 5 (X/Y/Z/A/C) • Integrated tilting rotary table with A and C axes • C-axis rotation: 360°Spindle and tool changer • Maximum spindle speed: 12,000 rpm Fgodpfs Afzirjx Acioi • Automatic tool changerFeed rates • X-axis rapid traverse: 35 m/min • Y-axis rapid traverse: 35 m/min • Z-axis rapid traverse: 30 m/minElectrical data • Power supply: 400 V, 3-phase • Frequency: 50 HzOptions included • Coolant through the spindle 20 bar • Renishaw 3D touch probe • Tool magazine with 40 tools • Chip conveyor • Mobile chip container • Ethernet connection • 5-axis simultaneous machining Technical Specification Through-spindle Coolant Yes

Condition: used, A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment. Fodpfez Hzd Sex Aciogi

Condition: used, Year of construction: 2022, Technical details: turning diameter: 336 mm turning length: 216 mm weight of the machine ca.: 8,3 t Fjdpfjzv Rgwjx Aciogi Article: CNC multi-axis lathe Manufacturer: Hurco Model: TMX 8MYSi Year of manufacture: 2022 CNC multi-axis lathe Excerpt from manufacturer’s specifications: Working area: Max. turning diameter: 336 mm Max. swing diameter: 560 mm Main spindle specifications: Max. speed: 4,500 rpm Chuck diameter: 210 mm Tie-bar diameter: 64.5 mm Counter-spindle specifications: Max. speed: 6,000 rpm Tool turret with driven tools Bar-Loading Magazine: SAMSYS M3000 (2022 model) HYDAC Cooler The machine can be visited under power. The tool configuration included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2005, HURCO vertical machining center with 4th axis, including: 16.000 RPM SK40 (BIG-PLUS) spindle HYDAC cooling unit High-Pressure Through-Spindle Coolant System Tool Length Measurement and Workpiece Position Detection with two Renishaw probing systems CNC-Controlled Rotary Table MR320 X-axis Travel 1270 mm Y-axis Travel 650 mm Z-axis Travel 610 mm Max spindle speed 16000 rpm Full technical specifications in the attached document. Fodszt R Ivspfx Acisgi Viewing of the machine in operation is possible upon appointment. Availability: 12/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table height: 610 mm, table length: 760 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The machine underwent a complete overhaul and modernization in the mid-2000s. The machine is in excellent condition and offers very high precision. It features a 10,000 rpm spindle and a high-pressure coolant system. It has been continuously maintained and serviced. Fgodpo Ab Eu Djfx Acioi A new Yaskawa servo card was replaced two years ago at a cost of EUR 3,000. The machine has a new touchscreen, plus one additional spare touchscreen, and the keyboard has also been replaced. The spindle motor was completely refurbished two years ago.

Condition: used, Year of construction: 2001, functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table length: 760 mm, table width: 510 mm, table load: 1,000 kg, For sale is a 3-axis CNC milling machine from the Hurco brand and the type VMX 24 Technical data: - Year of manufacture: 2001 - Control: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull bolts, which can be seen in pictures, are not part of the offer Fedpsv Tcfkjfx Aciegi Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website