Used Doosan Cnc Lathe for sale (315)

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Itedpfx Aewc Siced Dop Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Itedpfx Asqzhfxed Dep Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: like new (used), Year of construction: 2024, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,907 mm, total length: 5,300 mm, total width: 2,105 mm, type of input current: three-phase, overall weight: 6,900 kg, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DN Solutions model PUMA GT3100L" with DN Solutions-Fanuc i-Plus iHMI CNC complete with chip conveyor, Morari self-centering steady rest with 15-170mm opening, automatic doors, 12-position turret, auto power off and tool life management. Ijdjwuti Uopfx Ad Detp

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter: 1,600 mm, spindle motor power: 45 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 1,200 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, Daewoo Doosan PUMA V-1200M CNC vertical lathe, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for heavy-duty and industrial sector applications. Main technical specifications: Maximum swing and turning diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning increment 0.001° Main spindle: Speed: 2 ÷ 320 rpm (2 ranges) Power: 37/45 kW Itedpfx Ajwt S Rhjd Dep RAM driven spindle: Taper ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 stations, with BT-50 type tools Max. tool diameter: Ø 400 mm Max. tool length: 450 mm Max. tool weight: 50 kg Maximum tool weight in magazine: 600 kg Feeds: Rapid traverse X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Solid and high-performance machine for vertical machining of large workpieces with high precision.

Condition: like new (used), CUTTING DIAMETER: 230 MM TURNING LENGTH: 600 MM TAPER OF SPINDLE: ASA 6 STEP PANEL: 65 MM SPEED: 5000 RPM AXIS C: 0.001 DEGREE Ijdpfxsiux Ags Ad Dotp TAPER OF COUNTERSPINDLE: ASA 6 SPEED: 5000 RPM AXIS C: 0,001 DEGREE NR. TURRETS: 2 NR. STATIONS OF TOOL HOLDERS FOR TURRET: 12 NR. MOTORIZED TURRET: 12 CNC: FANUC 18

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, turning length: 450 mm, turning diameter: 210 mm, spindle bore: 51 mm, TECHNICAL DETAILS Iedpfx Ajv In Iajd Djtp Control: Fanuc i Max. turning length: 450 mm Max. turning diameter: 210 mm Spindle Bore in the spindle: 51 mm Tool turret Number of slots: 12 slots Driven: all EQUIPMENT - Fanuc i control - Central cooling - Tool probe - Knife holder

Condition: used, Year of construction: 2022, operating hours: 1,920 h, functionality: fully functional, machine/vehicle number: MV0091-004260, travel distance X-axis: 1,000 mm, travel distance Y-axis: 615 mm, travel distance Z-axis: 597 mm, mount diameter: 40 mm, rotational speed (max.): 10,000 rpm, overall weight: 6,500 kg, 4-axis machining center with 32 tool positions Itodpfownn Irjx Ad Dep

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 1,270 mm, turning diameter: 1,100 mm, spindle motor power: 55 W, spindle speed (min.): 5 rpm, spindle speed (max.): 850 rpm, travel distance X-axis: 580 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, workpiece weight (max.): 2,000 kg, total height: 4,012 mm, total length: 3,555 mm, chuck outer diameter: 800 mm, total width: 2,850 mm, spindle nose: ASA 15, overall weight: 22,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Used ​​2-axis vertical lathe "DOOSAN mod. Puma VT1100" with CNC Fanuc 21i-TB Iedpfx Aewrdqkod Dotp

Condition: used, Year of construction: 2016, Used 2016 Doosan Lynx 300 CNC Lathe with Swarf Conveyor, Parts catcher, tool setter, Mist extractor and 3 Jaw power chuck. In super condition with only 2353 spindle hours. Machine Specification: CAPACITY Swing Over Bed: 651 mm Swing Over Cross Slide: 461 mm Max Cutting Diameter: 450 mm Max Cutting Length: 765 mm Bar Capacity: 76 mm Chuck Diameter: 254 mm SPINDLE Max Spindle Speed: 3,500 rpm Spindle Nose: A2-8 Spindle Bore Diameter: 86 mm Spindle Motor Power: 15 / 11 kW FEED AXES Itodpfx Adsxxmvae Djp X Axis Travel: 255 mm Z Axis Travel: 790 mm Rapid Traverse (X Axis): 24 m/min Rapid Traverse (Z Axis): 30 m/min TAILSTOCK Quill Diameter: 80 mm Quill Stroke: 120 mm Quill Taper: MT#4 CONTROL CNC System: Fanuc i-Series SIZE Machine Dimensions (L x W x H): 3,991 mm x 1,785 mm x 1,715 mm Approximate Machine Weight: 4,000 kg For more information or to schedule a viewing, please contact us. Control: Fanuc i-Series Spec: Spindle bore 76 mm | Max Swing 651 mm | Travel X 255 Z 790 mm Accessories: Tailstock, tool setter, parts catcher, Mist extractor & swarf conveyor

Condition: good (used), Year of construction: 2016, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. Itodpjxwytvofx Ad Djp min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc i series control, Through spindle coolant,4th axis Table

Condition: good (used), power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 7,835 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: DC13 Top speed: 40 km/h Empty weight: 22.930 kg Functional Bucket capacity: 4,5 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCWLECJM10066 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 266 l/min Itjdpsxxmyrofx Ad Dop Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 9,244x3x3,66 Production country: KR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 2007, Doosan ACE-HM630 Horizontal Twin Pallet Machining Centre. Serial No. HM630262 (08-2007) with Fanuc Series 18i-MB Control, Pallet Size, 630mm x 630mm, Travel X/Y/Z = 1000/800/850mm, Full B Axis, 40 Position ATC, Spindle Taper ISO50, High Pressure Coolant, Filtermist Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Iedpoxvz Ufsfx Ad Detp

Condition: used, Year of construction: 2018, As good as new DOOSAN DNM4500 Itsdpfjxuagqex Ad Dep including tool holders Control: Heidenhain iTNC640 Travel: X-800 mm, Y-450 mm, Z-510 mm max. table load: 600 kg clamping surface: 1000 x 450 mm Spindle speed: max. 12,000 rpm tool holder: BT40 tool magazine: 30 seats chip conveyor: , electric handwheel: Heidenhain

Condition: used, machine/vehicle number: FDB04-1240-02249, Year of construction: 2013, operating hours: 13,937 h, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Empty weight: 7.436 kg Itjdpfx Adorh Eb Ej Dop Lifting capacity: 5.000 kg CE mark: yes Latest inspection: 2024-01-10 Please contact Johanny Hendrikse for more information

Condition: used, Year of construction: 2017, operating hours: 5,019 h, Serial number: dwgceceakh103xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21771 Spesifikasjoner. Ijdpoxvlfhefx Ad Dotp 2017 modell  Sertifisert til: 10/26  5019 timer  Vekt: 31800 kg  202 kW Maskin bredde: 320 cm  Understell (se bilder)  Beltestyringer  Pusseskuffe  Engcon rototilt ec233  Sentralsmøring  Ekstra hydraulikk  S70 feste  Lys pakke  Klima/ac  Radio  Leveringsklar    Beskrivelse:  Vi har en 2017 Doosan Dx300lc-5 Gravemaskin m/ rototilt og pusseskuffe for salg.  Det kan følge med Makin 3D gps om ønskelig mot et tillegg i prisen.  Maskinen har gått på serviceavtale og har full servicehistorikk. Alt skal fungere som det skal ifølge eier.  Leveringsklar  Hours: 5019 Own weight: 31800 Year controlled: Yes Year controlled until: 10/26 Width: 320 Kw: 202 Model: Dx300lc-5 Gravemaskin m/ rototilt og pusseskuffe

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, Itsdpfxoxwytcs Ad Dep 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: used, power: 127 kW (172.67 HP), color: orange, Year of construction: 2017, operating hours: 6,552 h, Year of manufacture: 2017 Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Iedpfxoxxkf Se Ad Detp Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan DOOSN DL06 STAGE IV 6 CILINDROS

Condition: good (used), power: 202 kW (274.64 HP), fuel type: diesel, color: orange, Year of construction: 2022, operating hours: 2,901 h, Equipment: air conditioning, Technical information AdBlue system: Yes Make of engine: DL08-LEE04 Top speed: 6 km/h Empty weight: 32.200 kg Functional CE mark: yes Condition Iodpfxexwdm Tj Ad Djtp Technical condition: good Visual appearance: good Identification Serial number: DHKCECENTN0010409 Other information Output of the auxiliary hydraulics: 288 l/min Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,605x3,4x3,37 Production country: KR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Itjdsxwqtaspfx Ad Dop Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), machine/vehicle number: FBA12-2470-00531, Year of construction: 2017, operating hours: 5,070 h, lifting height: 4,750 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, battery manufacturer: tab, battery capacity: 690 Ah, battery voltage: 48 V, fork length: 1,200 mm, Weights Empty weight: 3.554 kg Battery Battery: 690 Ah, 48 V, Year of manufacture 2017, Brand of battery tab Ijdpfx Aor Eqived Dotp Functional Lifting capacity: 1.800 kg Maximum passing height: 210 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Tyre brand: non marking Fork carriage: Sideshifter Latest inspection: 2024-04-08 Additional information Please contact Johanny Hendrikse for more information

Condition: used, Year of construction: 2022, Serial number: DXCCEBDTVN002xxxx Itsdpfx Asww Ahrjd Djp Please contact ATS Norway for more information Please provide reference number upon request: 20907 Specifications: Certified until 10/2025 Year: 2022 Hours: approx. 2,500 Power: 79.8 kW Weight: approx. 16,620 kg Track width: approx. 70 cm Machine width: approx. 290 cm New tracks (replaced at approx. 2,100 hours) Engcon EC219 tiltrotator S60 quick coupler Gjerstad grading bucket Gjerstad digging bucket Central lubrication Webasto heater replaced Rear and right-side cameras Extra work lights Radio/CD A/C and heating Undercarriage: see pictures Description:2022 Doosan DX160LC crawler excavator offered on behalf of customer.Machine is in daily operation and will be delivered with 500-hour service completed before sale.Comes with Engcon tiltrotator and two Gjerstad buckets.Delivery by agreement. Own weight: 16620 Model: DX160LC Beltegraver – Rotortilt og 2 skuffer

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Iodpfx Adjxv Udgs Dotp Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light.

Condition: used, functionality: fully functional, machine/vehicle number: 2506, Year of construction: 2020, operating hours: 271 h, load capacity: 1,250 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,005 mm, fork length: 1,200 mm, drive type: Elektro, High-lift truck Chassis number: 2506 Load centre: 600 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Ijdpfx Adjxwgc Do Dstp Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2020

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914015, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Itedpfsxbwvcsx Ad Djp Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Itsdpfx Adjxr Rz Te Dsp Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning