Used Kern Milling Machine for sale (45)

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iodpfsv D H Nbjx Ahuoal

Year of construction: 1990, condition: ready for operation (used), Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible. Ijdpfoxx Ufpsx Ahusal

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m Iedoxhqqmjpfx Ahujal SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 Iajdpjr D Nmyofx Ahuel - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: ready for operation (used), Year of construction: 2008, turning diameter over cross slide: 420 mm, spindle bore: 106 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 420 mm, turning length: 2,000 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, total length: 1,900 mm, total width: 2,100 mm, total height: 1,900 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 1 rpm, overall weight: 5,100 kg, three-jaw chuck diameter: 650 mm, Equipment: rotational speed infinitely variable, The DMT Kern CD650 lathe is suitable for both precision operations and heavy-duty machining. It is ideally suited for small batch and single-piece production. Additional information: Weight: 5,100 kg Dimensions: Machine: 1.9 m + distance between centers x 2.1 m x 1.9 m (LxWxH) Control cabinet: 1.2 x 0.5 x 1.6 m (LxWxH) Accessories & options: C-axis with drilling, milling, and engraving cycles, including free ICP input Ethernet and USB interface for network connectivity Chip conveyor Original documentation Ijdpfx Ahjw A Iu Ieusal Fixed and traveling steady rest Self-centering 3-jaw chuck Ø400 mm Bdoc Rx Trsw A Iu Iofvsg Independent 4-jaw chuck Ø600 mm Faceplate/claw plate Ø650 mm Various internal/external jaws Fixed and rotating centers Approx. 30 Multifix toolholders, type C Drill chuck with MK5 mount

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Iedpfx Aexgdfbjhujal Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iajdpfxsv D H Epe Ahujl

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Sledge path plan 260 mm centre distance 1000 / 1500 / 2000 mm power capacity 22 kW Ijdpfx Ahjwgn Agjuoal Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: --> Ease of operation Precision Working range

Condition: good (used), Year of construction: 2004, Swing over bed Ø 320 mm Swing over cross slide Ø 150 mm DBC Turning Length 750 mm Spindle bore 52 mm Iajdpfewu Dq Ajx Ahuol Spindle power 16 kW Tailstock spindle Ø 60 Ø Stroke pinole 140 mm Spindle taper 4 Mk Speeds / ranges 3000 Rpm Feed rate X-Axis 1000 mm/min. Feed rate Z-Axis 2000 mm/min.

Condition: excellent (used), Hilger & Kern P80 Pump Basic version P80 Drum size 80l Transmission ratio (drive) 56:1  Delivery rate (at 20 double strokes) l/min 0.61 Material Viscosity  (ball valve pump/scoop piston pump) 2.5 mio. Iajdog Ib Npspfx Ahuol Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum pack height mm 750 Maximum pack size 80 Maximum outer container Ø mm 440 A single pump is included in the delivery Complete factory lock, Large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Scales, crane scales, hanging scales -Manufacturer: Kern, crane scale hanging scale type HFB 600K200 -Weighing range: up to 600 kg -Readability: 200 g -Power supply: battery operation Isdpfsryx T Nex Ahujal -Operation: additionally with radio remote control -Dimension box: 240/120/H420 mm -Weight: 2,8 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 6414.21, turning diameter over cross slide: 420 mm, spindle bore: 64 mm, turning diameter: 420 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 210 mm, center height: 210 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 140 mm, quill diameter: 60 mm, total length: 2,150 mm, total width: 1,150 mm, total height: 1,700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, Equipment: rotational speed infinitely variable, The machine is faultless and has had no previous repairs, with very low operating hours. Iodowcdhdjpfx Ahuoal The lathe can be operated both conventionally and via servo drives. The control system allows programming via DIN commands, making it ideal for small batches and training. Sale due to misjudgment of the required technology: we have a growing need for a CAD/CAM-programmable cycle lathe. Please refer to the photos/description for the type, model, year of manufacture, and operating hours. Price: €50,000 (negotiable) based on a new price of approximately €76,000. Transport of the machine is not included in the price and is subject to negotiation. The center shown in most photos is not included in the offer; it is listed in the accessories list! Extensive accessories are listed in the Word document. The machine is available for immediate sale.

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iaodpfx Asv D H H Hjhujl

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Iajdpfx Aevl Ig Dshujl

Condition: good (used), Year of construction: 2007, KERN 2500 inserting machines for handling C5 and C6/5 envelopes. The set consists of a complete working line and a second set of this type of machine for parts. Year of production: 2007 + set of machines for parts from 2004. List of modules: - automated input module (single A4 sheets) ensures efficient paper feeding. - control module reading, grouping and folding (Grouping and Folding Station – GUF). - 2 modules for adding leaflets, each equipped with 2 feeders. - inserting module Iajdpfxswfglws Ahuel - envelope feeder and sealer module with a panel for handling applications and settings. - final conveyor belt with containers for incorrect enveloping. Both sets were used in one company. The first set was installed in 2004 and the second in 2007. The machines were used until 2020, when the company purchased new machines. At that time, the machines were renovated using components from the second set. Since 2020, the renovated machines have been used sporadically and the second set of machines was used for parts. .

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iedpsv D H N Iefx Ahusal

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iedpfxsv D H Hme Ahueal

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iedev D H H Tjpfx Ahusal

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iajdpfsv D H Rxox Ahuol

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iaedpfx Ajv D H Iqehuol