Used Optimum Milling Machine for sale (123)

Condition: new, Optimum OPTIturn TZ 4 precision center lathe and feed spindle lathe Precision center lathe with digital position indicator DPA 32 and quick-change steel holder. DESCRIPTION: Hardened and ground Z-axis guideway Motor protection switch Switch cabinet with 24 V DC power supply unit Partial cladding with included, generously dimensioned chip guard Chip guard with integrated position indicator, coolant hose and additional control panel Two-channel safety electronics Face and top slide spindle is hardened and ground and can be adjusted via split spindle nut Lead and feed spindle cover Finely graduated feed and thread cutting range Energy chain for gentle cable and hose guidance The standard gear wheels for metric thread pitches and modular threads are mounted in the machine. Change gears for inch and D.P threads optionally available Switch with life cycle calculation tested in accordance with EN ISO 13849 Decoupled handwheels tested in accordance with EN 23125 Safety handwheels with disengagement function in the X and Z axes Chip tray can be pulled out to the front Coolant device Quick-change steel holder SWH 5-B Steel holder 25 x 120 type D for square chisel 20 mm LED machine lamp for complete illumination of the work area Technical data: Dimensions and weights Length (product) approx. 1960mm Width/depth (product) approx. 1060mm Height (product) approx. 1690mm Weight (net) approx. 1250kg Working ranges Center height 200mm Center width 800mm Rotation diameter over machine bed 400mm Swing diameter over cross slide 245mm Bed width 260mm Speed range Number of speed ranges 16 Speed range 45 - 1800min¯¹ Electrical data Power drive motor 3 / 4.5kW Supply voltage 400V Mains frequency 50Hz Total connected load 6kW Ncodpfx Ajhbdz Ssb Isl Cooling lubricant system Cooling lubricant system Power Coolant pump 0.125kW Spindle Spindle holder DIN ISO 702-1 No. 5 Form A2 Spindle bore/bar passage diameter 52mm Chuck passage diameter 52mm Spindle cone MK 6 Tailstock Tailstock holder MK 3 Tailstock quill stroke 110mm Tailstock quill diameter 50mm Pitch Pitch Metric 0.2 - 14mm/rev Number of leads metric 26 Pitch inch 80 - 1Gg/1" Number of pitches inch 42 Pitch Diametral Pitch 3 - 200Gg/π Number of pitches Diametral Pitch 33 Module thread pitch 0.1 - 7mm/rev Number of module thread pitches 44 Travel distance Top slide travel 112mm Travel of face slide 212mm Bed slide travel 800mm Feed rate Feed range longitudinal 0.0263 - 1.8416mm/rev Number of feeds longitudinal 48 Feed range flat 0.0133 - 0.9321mm/rev Number of feeds flat 48 Scope of delivery Fixed steady rest passage Ø 10 - 130 mm Rotating steady rest passage Ø 10 - 100 mm Reducing sleeve MK3 and MK6 Fixed center point MK3 Quick-change steel holder 5-B Steel holder 25 x 120 type D for square chisels Set of change gears for metric thread Initial machine filling with quality oil Operating tool Integrated coolant system

Condition: new, Optimum OPTIdrill DM 50V magnetic core drilling machine High-quality machine with infinitely variable speed control and maximum functionality. TECHNICAL DATA Dimensions and weights Length (product) approx. 250mm Width/depth (product) approx. 220mm Height (product) approx. 300 - 470mm Weight (net) approx. 11kg Drive power Input power 1.7kW Mounting Spindle holder fixed Drill holder Weldon 3/4 " Speed range Speed(s) at idle (clockwise rotation)100 - 810 min¯¹ Infinitely variable speed control Electrical data Supply voltage 230V Mains frequency 50Hz Nedpjt Ifidjfx Ab Iocl Standards and approvals EMC class C2 Standard DIN EN 55011 Protection class IP 42 Magnet Magnet holding force 15.6kN Magnetic base length 166mm Magnetic base width 80mm Core drill Max. core drill diameter with manual feed 50mm Drilling depth max. core drilling with manual feed 50mm Solid drill Drill diameter max. solid drill directly mounted 13mm SCOPE OF DELIVERY Carrying case Operating tool Safety belt Quick-change chuck EQUIPMENT Vario drive ✔ Manual quill feed

Condition: new, Optimum OPTIdrill DQ 20V bench drill 3191080 Inexpensive bench drill with V-belt drive and mechanically infinitely variable speed. TECHNICAL DATA Dimensions and weights Column diameter 65mm Length (product) approx. 581mm Width/depth (product) approx. 397mm Height (product) approx. 957mm Weight (net) approx. 40.7kg Drilling capacity Drilling capacity steel (S235JR) 16mm Continuous drilling capacity steel (S235JR) 14mm Drilling table Drilling table work surface length 243mm Drilling table work surface width 243mm Drill table type T-slot diagonal Drilling table T-slot size 14mm Drill table T-slots quantity 2 Drilling table rotation 360 Drilling table inclination± 45° Load capacity drilling table15kg Distance spindle - drill table max. 423mm Speed range Speed range 450 - 2500min¯¹ Mechanical speed control Electrical data Drive motor power 0.75kW Supply voltage 230V Mains frequency 50Hz Ncedet N Ipiepfx Ab Iol Machine base Distance spindle - machine foot max. 599mm Machine foot work surface length 181mm Machine foot working surface width 187mm Spindle Quill stroke 80mm Spindle holder MK 2 throat 152mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 2/B16 T-nuts

Condition: new, Optimum OPTIdrill DX 15V bench drill 3020155 Bench drills with infinitely variable speed control. TECHNICAL DATA Dimensions and weights Column diameter 60mm Length (product) approx. 425mm Width/depth (product) approx. 475mm Height (product) approx. 980mm Weight (net) approx. 66kg Drilling capacity Drilling capacity steel (S235JR) 15mm Continuous drilling capacity steel (S235JR) 12mm Drilling table Drilling table work surface length 290mm Drilling table work surface width 290mm Drilling table T-slot size 10mm Drilling table T-slots quantity 2 Drill table T-slot distance 100mm Distance drill chuck - drill table min. 98mm Distance drill chuck - drill table max. 375mm Speed range Speed range 100 - 3000min¯¹ Speed control electronically adjustable Ncjdpfxst N Ix De Ab Iel Electrical data Supply voltage 230V Mains frequency 50Hz Machine base Distance drill chuck - machine foot min. 290mm Distance drill chuck - machine foot max. 355mm Machine foot working surface length 290mm Machine foot working surface width 280mm Machine foot T-slot size 14mm Machine foot T-slot number 2 Machine foot T-slot distance 100mm Standards and approvals Standard DIN EN 55011 EMC class C2 Spindle Quill stroke 60mm Spindle holder MK 2 throat 235mm Motor(s) Drive power spindle motor 0.85kW SCOPE OF DELIVERY Quick-action drill chuck (1 - 13 mm) Tapered arbor for drill chuck MK2-B16

Condition: new, Optimum OPTIturn TH 3610D mechanic lathe Completely equipped mechanic's lathe. TH 3610D with digital position indicator DPA 21 Optimum dealer - please ask for our best offer! Hardened and ground Z-axis guideway Spindle mounting Camlock DIN ISO 702-2 No. 5 Precisely machined slide Handwheels with adjustable fine scaling 0.04 / 0.02 mm Quadruple steel holder All guideways adjustable by means of taper bars Main spindle running in oil bath Gear wheels smooth-running, hardened and ground Guaranteed concentricity of spindle nose better than 0.015 mm Gear wheels and shafts hardened and ground, running in oil bath in precision bearings Handwheels decoupled and tested according to EN 23125 Safety handwheels with push-out function in X- and Z-axis Two-channel right-left switch tested according to EN 23125 Switch with life cycle calculation, tested according to EN ISO 13849 Motor protection switch, lockable main switch Right/left rotation switchable on bed slide Lead screw cover Tailstock for taper turning adjustable ± 10 mm Tailstock quill and handwheel with adjustable fine scaling 0.025 mm Quick, easy and tool-free adjustment by means of clamping lever Heavily ribbed prismatic bed, inductively hardened and precision ground Machine base with tool compartments on both sides Emergency stop device with foot actuation Pull-out chip tray with guide rails LED machine lamp integrated in chip guard TH 3610D: Digital position display DPA 21 User-friendly membrane keyboard, splash-proof, closed and glare-free Glass scales TECHNICAL DATA Dimensions and weights Length (product) approx. 1930mm Height (product) approx. 1620mm width/depth (product) ca. 725mm weight (net) ca. 572kg Working range Center height 180mm Swing diameter in bed bridge 516mm Center width 980mm Turning length in the bed bridge 160mm Swing over machine bed 356mm Bed width 187mm Speed range Number of speed ranges 8 Speed range 70 - 2000min¯¹ Electrical data Power drive motor 1,5kW Mains frequency 50Hz Ncsdpfeg Ryt Asx Ab Isl Supply voltage 400V Spindle Spindle mounting Camlock DIN ISO 702-2 No. 5 Spindle cone MK 6 spindle bore/rod passage diameter 52mm steel holder mounting height max. 16mm Tailstock Tailstock mount MK 3 Tailstock quill diameter 42mm Tailstock quill stroke 120mm Pitch Pitch Metric 0.4 - 7mm/rev Pitch Inch 56 - 4Gg/1" Number of pitches metric 26 Number of pitches inch 34 Travel Travel X-axis 100mm Travel Y-axis 170mm Feed rate Feed range longitudinal 0.052 - 1.392mm/rev Feed range planar 0.014 - 0.38mm/rev Number of feeds longitudinal 32 Number of feeds planar 32 SCOPE OF DELIVERY Fixed steady rest passage max. Ø 100 mm Travelling steady rest passage max. Ø 95 mm LED machine light Reducing sleeve MK 6 / MK 3 Two fixed centering tips MK 3 Quadruple steel holder Change gear set Machine base Machine initial filling with quality oil Operating tool Do not forget the lathe chuck!

Condition: new, Optimum OPTIdrill B 17 PRO basic bench drill 3003161 With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 565mm Width/depth (product) approx. 275mm Height (product) approx. 840mm Weight (net) approx. 36.5kg Drilling capacity Drilling capacity steel (S235JR) 15.5mm Continuous drilling capacity steel (S235JR) 12mm Drilling table Drilling table work surface length 235mm Drilling table work surface width 220mm Drilling table type T-slot diagonal Drilling table T-slot size 12mm Distance spindle - drilling table max. 325mm Speed range Speed range 680 - 2700min¯¹ Number of speed ranges 5 Electrical data Supply voltage 230V Mains frequency 50Hz Machine base Distance spindle - machine base max. 530mm Machine base work surface length 170mm Machine foot working surface width 180mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 148mm Machine foot length 210mm Machine foot width 215mm Njdpfst N Irwox Ab Iocl Spindle Quill stroke 65mm Spindle holder MK 2 throat 152mm Motor(s) Spindle motor drive power 0.49kW SCOPE OF DELIVERY Quick-action drill chuck 1 - 15.5 mm Morse taper MK 2 (B 16) T-nuts

Condition: new, Optimum OPTIdrill DH 40CT column gear drilling machine with cross table 3034349 The versatile machines for milling and drilling. TECHNICAL DATA General information Tightening rod M 16 Dimensions and weights Column diameter 115mm Length (product) approx. 1060mm Width/depth (product) approx. 745mm Height (product) approx. 2090mm Weight (net) approx. 370kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 End mill size max. 25mm Nedpfxst N Rkpj Ab Iscl Cutter head size max. 76mm Drilling table Drilling table work surface length 730mm Drilling table work surface width 210mm Drilling table T-slot size 14mm Drilling table T-slots quantity 3 Drilling table T-slot spacing 63mm Load capacity drilling table 50kg Distance spindle - drilling table max.600mm Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 495mm Machine foot working surface width 375mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 230mm Machine foot length 670mm Machine foot width 470mm Spindle Quill stroke 120mm quill diameter 75mm Spindle holder MK 4 throat 280mm Drill head rotation 360 Drill head inclination 45° Manual quill feed Drill head height adjustment 260mm Travel distance Manual X-axis travel 480mm Manual Y-axis travel 180mm Manual Z-axis travel 560mm SCOPE OF DELIVERY Sprocket chuck 1 - 13 mm / B 16 T-nuts Adapter MK 4-MK 3 Arbor MK 4 / B16 Operating tool

Condition: new, OPTIsaw S 275NV swing frame - metal band saw Description Metal band saw with swivelling saw bracket. S 275NV with adjustable blade speed -Quiet running -Stabile casting -High cutting accuracy due to vibration-free running As the saw bar hydraulic cylinders with adjustable restrictor valve Micro switch for automatic shut-off Coolant system -Equipped with high-quality bi metal blade -Adjustable material stop for serial works -Sturdy machine base -Ball bearing blade Guide Quick clamping Vice adjustable via Handwheel. Secure the workpiece with handy quick-release lever Good readable scale for angle adjustment Overload protection S 275N Motor protection switch Two reversible speed S 275NV -Infinitely variable blade speed 20-90 m / min. Speed change during operation possible Nsdpfxsdc H Sis Ab Iecl Pressure gauge Simple and proper adjustment of blade tension

Condition: new, Optimum OPTIsaw SD 351 AV Semi-automatic double miter metal band saw With Siemens inverter drive. Professional and robust saw with a cutting capacity of up to 350 mm Description: Heavy industrial design Quiet running Manual or semi-automatic operation Infinitely adjustable saw band speed from 0-80 m/min. High cutting accuracy thanks to vibration-free operation Miter adjustment up to 60° by swiveling the entire saw frame With high-quality bi-metal saw blade as standard End stops adjustable to the degree chip brush Micro switch for automatic limit switch Roller support adjustable for long and heavy workpieces coolant pump Ball-bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed using the feed control valve on the control panel Ncsdsdc H Ukspfx Ab Iel Generously dimensioned, hydraulic quick-release vice, self-closing, adjustable for large cross-sections Fully equipped machine; The user can work productively immediately after commissioning EMC class C2 2-channel safety chain with emergency stop Converter Siemens Sinamics G110M Functionality semi-automatic operation Closing the vise and activating the motor Lowering the saw frame for cutting The motor stops and the saw arm returns to the starting position Technical specifications: Dimensions and weights: Length (product) approx.: 1935mm Width/depth (product) approx.: 1425mm Height (product) approx.: 1626mm Weight (net) approx.: 600kg Electrical data: Power drive motor: 2.2kW Connection voltage: 400V Mains frequency: 50Hz Engine power hydraulic pump: 1.4kW Engine power coolant pump: 50W Total connection value: 3.8kW Machine data: Saw band speed(s): 15 - 100m/min Speed levels: continuously adjustable Saw band length: 2925mm Saw band width: 27mm Saw band thickness: 0.9mm Cutting angle: -45 – +60° Manual operation: hydraulically via push button Semi-automatic operation: automatic Cutting areas: Cutting range 0° round (solid material): 270mm Cutting range 0° square (full material): 230mm Cutting range 0° standing rectangular (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (full material): 170mm Cutting range -45° standing (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (full material): 200mm Cutting range +45° standing rectangular (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (full material):140mm Cutting range +60° standing (solid material): 140 x 220mm

Condition: new, Optimum OPTIdrill D 33 Pro pillar drill action set 3003040SET with V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 915mm Column diameter 92mm Width/depth (product) approx. 450mm Height (product) approx. 1705mm Weight (net) approx. 132kg Ncedpfjt N Iuxox Ab Isl Drilling capacity Drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 25mm Drilling table Drilling table work surface length 475mm Drilling table work surface width 425mm Drilling table T-slot size 14mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drill table max. 695mm Speed range Speed range120 - 1810min¯¹ Number of speed ranges9 Electrical data Drive motor power 1.1kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 410mm Machine foot working surface width 325mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 250mm Spindle Quill stroke 120mm Spindle holder MK4 throat 254mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 4/B16 T-nuts Machine vice BMP

Condition: new, Optimum OPTIdrill D 23Pro (400 V) special offer set bench drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 680mm Column diameter 73mm Width/depth (product) approx. 350mm Height (product) approx. 1015mm Weight (net) approx. 63.5kg Drilling capacity Drilling capacity steel (S235JR) 25mm Continuous drilling capacity steel (S235JR) 20mm Drilling table Drilling table work surface length 280mm Drilling table work surface width 245mm Drilling table T-slot size 12mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drilling table max. 425mm Speed range Speed range 200 - 2440min¯¹ Number of speed ranges 12 Electrical data Drive motor power 0.75kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max. 618mm Ncodpfx Ast N Ivvjb Iel Machine foot working surface length 240mm Machine foot working surface width 250mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 170mm Spindle Quill stroke 80mm Spindle holder MK2 throat 180mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 2/B16 T-nuts Machine vice BMP

Condition: new, Optimum OPTIdrill DH 40G Universal column gear drilling machine 3034356 TECHNICAL DATA Dimensions and weights Length (product) approx. 590mm Width/depth (product) approx. 700mm Height (product) approx. 2050mm Weight (net) approx. 320kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 Drilling table Drilling table work surface length 500mm Drilling table work surface width 460mm Ncsdpfet N Ri Eex Ab Iel Drilling table T-slot size 14mm Load capacity drilling table 50kg Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Spindle Quill stroke 120mm Spindle holder MK 4 throat 280mm Drill head rotation 45° Drill head inclination 360 Manual quill feed Drill head height adjustment 265mm SCOPE OF DELIVERY Gear rim drill chuck 1-13 mm/B16 Tapered arbor for drill chuck MK4/B16 Tightening rod M 16 Adapter MK4-MK3 Operating tool

Condition: new, Precision center lathe and feed spindle lathe Make: OPTiturn Model: TM 3310 D Item no.: 3403025 Condition: New machine Center height: 165 mm Center width: 1.000 mm Spindle speed: 65 - 2,000 rpm (9 steps) Equipped as standard with Njdeh I N Sbspfx Ab Iocl - 3-axis digital readout DPA 31 PLUS - 3-jaw chuck 160 mm - Electrically braked main motor - Machine base with chip tray - quadruple steel holder - LED machine light - Reducing sleeve MK 5/MK 3 - MK 3 fixed centers - Chuck protection hood, electrically fused - Set of change wheels - Oil filling - Operating tool - Operating instructions

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B Ncedpfx Aog Hkmrsb Iel - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine Nsdpfx Abedbgxce Iocl -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set -Oil -Control tool -Manual

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Nodpfec I Tzvjx Ab Ijcl Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel -Device for the Regrinding of chisel -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual

Condition: new, Year of construction: 2025, turning diameter over cross slide: 270 mm, spindle bore: 58 mm, turning diameter: 460 mm, center height: 230 mm, center width: 1,060 mm, quill stroke: 130 mm, quill diameter: 60 mm, total length: 2,280 mm, total width: 1,150 mm, total height: 1,650 mm, Turning diameter in gap: 690 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, overall weight: 1,910 kg, quill mount: MK 4, metric thread pitch (max.): 14 mm, tailstock quill diameter: 60 mm, Optimum TH 4610D center lathe with DPA 31 Plus digital position indicator and quick-change tool post Hardened and ground Z-axis guideway Guaranteed spindle nose concentricity ≤ 0.015 mm Shafts, gears, and main spindle run in an oil bath Lead screw cover Precisely machined slide All guideways adjustable via V-ledges Mechanical longitudinal feed shutoff of the bed slide with four adjustable eccentrics Right/left rotation on the bed slide can be switched via a switch spindle Central lubrication in the bed slide Top slide adjustment range ± 90° Smooth-running, hardened, and ground gears mounted on two adjustable precision tapered roller bearings Switch with life cycle calculation, tested according to EN ISO 13849 Large chip guard with integrated LED Machine lamp Handwheels with adjustable fine scales of 0.04 / 0.02 mm Safety handwheels with disengagement function according to EN23125 on the X and Z axes Quick-action feed gears in a closed design, gears and shafts hardened and ground, running in an oil bath on precision bearings Adjustable thread dial scale Tailstock for taper turning adjustable ± 10 mm Tailstock sleeve and handwheel with adjustable fine scale of 0.025 mm Quick, easy, and tool-free adjustment of the tailstock using a clamping lever Cable routing via energy chain Heavily ribbed prismatic bed, induction-hardened and precision-ground from gray cast iron Coolant system with separate coolant tank with level indicator and oil separator; Easy and complete emptying and cleaning according to DIN standards Emergency stop device with foot operation Scope of delivery: Fixed steady rest, opening Ø 25 - Ø 178 mm Ncjdjwaaf Hepfx Ab Isl Revolving steady rest, opening Ø 19 - Ø 114 mm LED machine light Adapter MK6-MK4 Non-revolving center MK4 Non-revolving, but temperature-resistant center MK4 Quick-change tool holder SWH 5-B Tool holder 25 x 120 Type D for 20 mm square chisel Thread gauge Set of interchangeable gears Gears for thread gauge (metric) Initial machine filling with high-quality oil Operating tools Options available upon request; we will be happy to advise you: - Three-jaw chuck / four-jaw chuck - Steel reamer / turning tool - Mounting elements - Commissioning Do you need a different machine? Please contact us!

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22012101118, spindle bore: 21 mm, center height: 100 mm, turning diameter: 200 mm, type of input current: AC, turning diameter over bed slide: 110 mm, input voltage: 230 V, spindle speed (max.): 2,500 rpm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 150 rpm, spindle speed (min.): 150 rpm, tailstock quill mount: MK 2, spindle mount: MK 3, total width: 425 mm, total length: 830 mm, total height: 360 mm, tailstock quill stroke: 65 mm, Equipment: rotational speed infinitely variable, Working Ranges Center Height: 100mm Ncsdpfxow Imhvo Ab Iel Center Distance: 300mm Swing Diameter over Cross Slide: 110mm Bed Width: 100mm Speed Range Speed Control: electronically adjustable Number of Speed Ranges: 2 Speed Range: 150 – 2500 rpm Electrical Data Drive Motor Power: 0.6kW Connection Voltage: 230V Mains Frequency: 50Hz Standards and Approvals Standard: DIN EN 55011 EMC Class: C1 Spindle Spindle Bore: 21mm Tool Holder Maximum Mounting Height: 12mm Chuck Passage Diameter: 20mm Spindle Taper: MT 3 Tailstock Tailstock Taper: MT 2 Tailstock Quill Travel: 65mm Leadscrews Metric Pitch: 0.25 – 3mm/rev Number of Metric Pitches: 14 Inch Pitch: 44 – 8 TPI Number of Inch Pitches: 12 Travel Cross Slide Travel: 55mm Compound Slide Travel: 75mm Carriage Travel: 300mm Feed Longitudinal Feed Range: 0.1 – 0.2mm/rev Number of Longitudinal Feeds: 2

Condition: new, Year of construction: 2021, Precision center lathe and feed spindle lathe Make: OPTIMUM Model: OPTiturn TZ 4 Item no.: 3432240 Condition: New machine Center height: 200 mm Center width: 800 mm Speed: 45 - 1,800 rpm (16 steps) equipped as standard with - 3-axis digital readout DPA 32 - MK 3 fixed center point Njdpegqw U Rjfx Ab Iocl - quick-change toolholder size B - BD turning tool holder - Reducing sleeve MK 6 / MK 3 - Fixed steady rest ø 10 - 130 mm - Moving steady rest ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine lamp - Operating tool

Condition: new, Precision center lathe and feed spindle lathe Make: OPTiturn Model: TM 4010 D Item no.: 3403045 Condition: New machine Center height: 200 mm Center width: 1.000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Equipped as standard with Njdpfxoilup Nj Ab Ijcl - 3-axis digital readout DPA 31 PLUS - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions

Year of construction: 2025, condition: new, Motor power: 1,1kW / 400V Cutting area: 100mm x 145mm Coolant device: Yes Feed: stepless Saw band speed: 45 /90 m/min Saw band dimension: 2480 x 27 x 0.9 mm Cutting angle: 0° to 60 Nsdpfx Abeha Nz Us Iscl Dimension: 1400mm x 685mm x 1235mm Weight: 185kg

Year of construction: 2022, condition: new, Motor power: 1,1kW / 230V Cutting area: 100mm x 145mm feed: stepless saw band speed: 22 / 31 / 55 m/min Saw band dimension: 1638 x 13 x 0.65 mm Cutting angle: -45° to 60 Nedpfxsgulr Ae Ab Iscl Dimension: 1085mm x 498mm x 978mm Weight: 78kg

Condition: excellent (used), Year of construction: 2013, Band saw, Semi-automatic saw, Metal saw, Metal band saw, Frame metal saw Toptech / Optimum GB 4240, Used machine Manufacturer: Toptech / Optimum Type: GB 4240 Year/month of manufacture: 2013/06 Inclusion dimensions: 2200 x 1100 x 2000 mm Electrical data: 400 V / 50 Hz / 4 kW Tape size: 34 x 11 x 4320 mm Belt speed: 19-86 m/min - Hydraulic vise - Adjustable feed Ncjdpfx Aem Akwzob Isl Material size: 400 x 400 mm

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum Nodpfx Abju R Tfto Iscl - new exhibition machine -

Condition: as good as new (ex-display), Year of construction: 2021, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Nodpeycqf Usfx Ab Iecl Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s